c3300k cable ok but can't be unlock - GSM-Forum

nasro_nd · 10-20-2010, 18:58

Selected model: C3300K
Selected com port: COM7
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Sending loader1... OK
Flash ID: 08
Sending loader2... OK
Timeout damp
Read - fail
Elapsed time: 31 second, sw ver: 3.4.0068

WILUNLOCK · 10-20-2010, 23:35

pleasse check cable ...

mohamed183 · 10-20-2010, 23:41

Sign the speed of a few box

zine · 10-20-2010, 23:59

if cable is ok thene need to cancel battery .. cable work without battery after clic unlock and software ask for phone put cable to phone and waiting done
enjoy

sbata-team · 10-21-2010, 00:07

chek ur resistor 500 kh http://media.digikey.com/photos/Yage...R-50JB-2K0.jpg

nasro_nd · 10-21-2010, 09:33

Quote:

Originally Posted by WILUNLOCK

pleasse check cable ...

cable is good 100% and it work fine

nasro_nd · 10-21-2010, 09:33

Quote:

Originally Posted by zine

if cable is ok thene need to cancel battery .. cable work without battery after clic unlock and software ask for phone put cable to phone and waiting done
enjoy

without battery the software can't detect phone

nasro_nd · 10-21-2010, 09:35

Quote:

Originally Posted by mohamed183

Sign the speed of a few box

i tested all speed dear and same problem

marvin03 · 10-21-2010, 10:44

keep press power on......

nasro_nd · 10-21-2010, 22:48

Quote:

Originally Posted by sbata-team

chek ur resistor 500 kh http://media.digikey.com/photos/Yage...R-50JB-2K0.jpg

this resistor 2k but we need a 560k ???

10-20-2010, 18:58	#1 (permalink)
nasro_nd No Life Poster Join Date: May 2005 Location: CANADA Age: 42 Posts: 1,457 Member: 149415 Status: Offline Sonork: 100.1609895 Thanks Meter: 77	c3300k cable ok but can't be unlock Selected model: C3300K Selected com port: COM7 Selected speed port: 921600 Please, connect phone and press power button 3 seconds Phone Detected Sending loader1... OK Flash ID: 08 Sending loader2... OK Timeout damp Read - fail Elapsed time: 31 second, sw ver: 3.4.0068

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	23	01-07-2018 17:14
need ericsson 88 cable	migdamas	Old Ericsson Phones & Sony Phones	2	03-24-2017 16:24
need software for 5161 by cable	mln2000	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	08-29-2010 20:17
8810 mbus-cable	zfrank	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-19-1999 13:12

10-20-2010, 23:35	#2 (permalink)
WILUNLOCK No Life Poster Join Date: Mar 2008 Location: Colombia Posts: 1,858 Member: 726741 Status: Offline Thanks Meter: 1,256	pleasse check cable ...

10-20-2010, 23:41	#3 (permalink)
mohamed183 Freak Poster Join Date: Dec 2005 Location: gem-flash team Posts: 339 Member: 212136 Status: Offline Sonork: 100.1580104 Thanks Meter: 165	Sign the speed of a few box

10-20-2010, 23:59	#4 (permalink)
zine No Life Poster Join Date: Apr 2004 Location: ORAN-ALGERIE Age: 49 Posts: 863 Member: 64213 Status: Offline Thanks Meter: 493	if cable is ok thene need to cancel battery .. cable work without battery after clic unlock and software ask for phone put cable to phone and waiting done enjoy

10-21-2010, 00:07	#5 (permalink)
sbata-team Freak Poster Join Date: Nov 2008 Location: MOROCCO Posts: 316 Member: 909860 Status: Offline Sonork: +212600693045 Thanks Meter: 120	chek ur resistor 500 kh http://media.digikey.com/photos/Yage...R-50JB-2K0.jpg

10-21-2010, 10:44	#9 (permalink)
marvin03 No Life Poster Join Date: Apr 2009 Age: 41 Posts: 2,031 Member: 1015389 Status: Offline Sonork: 19830303 Thanks Meter: 526	keep press power on......