Can't remove FRP lock. Flashed and installed firmware, and the message is still there - Page 2 - GSM-Forum

GSM Deals · 02-19-2018, 11:40

you are using a cracked version of z3x and still got much help brrrrr!
regards

tawhid91 · 02-19-2018, 12:28

Quote:

Originally Posted by Maoradm

Hi everybody. I have a G930F. I get the message " An unauthorized attempt has been made to reset your device to factory default settings " when I start the S7.
I flashed the S7 (using tnt enforce + Z3X 24.3 Loader + SamsungToolPRO + Combination file) and did a factory reset while being in factory binary mode, After that, I installed a hardware (G930FXXU1DQJ3) with odin. Everything works but the message is still there.
Of course I know that if ן got the mail/ password/ receipt but unfortunately I don't have any of those.
I've tried the bypass on the "sticky" thread but it doesn't work.

Any suggestions please?...

he is use crack Don't help him

markhaines1985 · 02-19-2018, 16:48

making it to hard. just flash any stock rom that is 7.0 rev 1...then flash his eng root file. it doesnt matter if it sticks on samsung screen as long as you have adb access. open command prompt and enter this:

adb devices
adb shell
dd if=/dev/zero of=/dev/block/sda11
exit
adb reboot download

then flash stock boot image back.

he gave you bypass command above..this adb command actually wipes frp so no need for phone to fully boot to remove frp

eddiea · 02-19-2018, 19:24

Quote:

Originally Posted by markhaines1985

making it to hard. just flash any stock rom that is 7.0 rev 1...then flash his eng root file. it doesnt matter if it sticks on samsung screen as long as you have adb access. open command prompt and enter this:

adb devices
adb shell
dd if=/dev/zero of=/dev/block/sda11
exit
adb reboot download

then flash stock boot image back.

he gave you bypass command above..this adb command actually wipes frp so no need for phone to fully boot to remove frp

not possible to flash

only "COMBINATION_FA60_G930FXXU2ARA2_CL7964511_QB165812 96_REV00_user_mid_noship.tar"
without error

tried with G930FXXU1DQD7_NEE1DQD2 error.

with combination file adb is on and "z3x remove FRP" is okey.
but FRP still on

someone an idea?

eddiea · 02-19-2018, 23:49

hello

after flashing combination file
FRP unlock with Z3X done
Factory reset

Phone is still FRP LOCKED

Flashed with latest Firmware

all is okey, no FRP

thanx

02-19-2018, 11:40	#16 (permalink)
GSM Deals No Life Poster Join Date: Apr 2001 Location: AGADIR Morocco Posts: 1,626 Member: 3936 Status: Offline Thanks Meter: 237	you are using a cracked version of z3x and still got much help brrrrr! regards

02-19-2018, 16:48	#18 (permalink)
markhaines1985 Cheater -Don't Deal with him- Join Date: Feb 2016 Posts: 496 Member: 2532914 Status: Offline Thanks Meter: 1,154	making it to hard. just flash any stock rom that is 7.0 rev 1...then flash his eng root file. it doesnt matter if it sticks on samsung screen as long as you have adb access. open command prompt and enter this: adb devices adb shell dd if=/dev/zero of=/dev/block/sda11 exit adb reboot download then flash stock boot image back. he gave you bypass command above..this adb command actually wipes frp so no need for phone to fully boot to remove frp

02-19-2018, 23:49	#20 (permalink)
eddiea Freak Poster Join Date: Feb 2004 Posts: 331 Member: 55142 Status: Offline Thanks Meter: 6	hello after flashing combination file FRP unlock with Z3X done Factory reset Phone is still FRP LOCKED Flashed with latest Firmware all is okey, no FRP thanx