E2120 imei0000000000000000 - GSM-Forum

Gsm-Soft · 03-19-2013, 16:19

plz help me z3x team i unlock e2121b with z3x box after imei 0000000000000000
when i try to repair imei i am getting this error

Selected model: E2121B
Selected com port: COM15
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Use automatic parameters
Phone in TAT MODE
Phone SW: E2121BXXJK3
Phone CSC: E2121BOXEJK1
Phone BT ADDR: 0012-47-000001
Phone IMEI: 00000000000000
Deactivated MSL - FAIL
Elapsed time: 37 second, sw ver: 3.5.0038

plz help me

TICTAC_M · 03-19-2013, 17:45

you need change in program to flash mode - in tat mode show it error.

wasetec1 · 03-19-2013, 18:28

you can apply a eeprom file and then have them do the repair via Z3X

wasetec1 · 03-19-2013, 18:44

can use the latest version but Z3X
I did one with success

Code:

Selected model: E2120
Selected com port: COM3
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Sending loader1... OK
Flash ID: 08
Sending loader2... OK
Please wait for patching firmware...
Already patched SW
Please, connect phone and press power button 3 seconds
Phone Detected
Use automatic parameters
Phone in TAT MODE
Phone master IMEI: 35697204332477
Phone slave IMEI: 35697204332477
Phone SW: E2120UTIG1_
Phone CSC:
Phone BT ADDR: 0000-00-000000
Phone SN: RS8Z411681
Deactivated MSL - TRUE
Write imei - ok
Repair - ok

03-19-2013, 16:19	#1 (permalink)
Gsm-Soft Banned Join Date: Aug 2010 Posts: 441 Member: 1358967 Status: Offline Sonork: 100.1585102 Thanks Meter: 100	E2120 imei0000000000000000 plz help me z3x team i unlock e2121b with z3x box after imei 0000000000000000 when i try to repair imei i am getting this error Selected model: E2121B Selected com port: COM15 Selected speed port: 921600 Please, connect phone and press power button 3 seconds Phone Detected Use automatic parameters Phone in TAT MODE Phone SW: E2121BXXJK3 Phone CSC: E2121BOXEJK1 Phone BT ADDR: 0012-47-000001 Phone IMEI: 00000000000000 Deactivated MSL - FAIL Elapsed time: 37 second, sw ver: 3.5.0038 plz help me

03-19-2013, 17:45	#2 (permalink)
TICTAC_M No Life Poster Join Date: Aug 2006 Location: Ecuador -Andes Posts: 1,740 Member: 331361 Status: Offline Thanks Meter: 155	you need change in program to flash mode - in tat mode show it error.

03-19-2013, 18:28	#3 (permalink)
wasetec1 Insane Poster Join Date: Oct 2012 Location: Brasil Age: 35 Posts: 83 Member: 1822173 Status: Offline Sonork: 100.1624576 Thanks Meter: 26	you can apply a eeprom file and then have them do the repair via Z3X