[GUIDE] Unlock E1200i - With Drivers

[munnibhai]

Selected model: E1200I
Selected port: COM5 Z3X BOX Serial Port
Selected port speed: 115200
Waiting phone... detected COM11
Sending FDL... OK
Reconnecting phone... OK
Reading NV... OK
Checking NV... OK
IMEI Master: 35689306142xxxx
Phone HW: MP 0.400
Product code: GT-E1200ZWXXXX
Please wait, calculating codes... OK (time - 00:00:06)
Freeze code: 1614xxxx
NET lock: 00000000
Sub lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool v.18.3

1. Download and Install these drivers first - DOWNLOAD E1200i Drivers
2. Turn on Phone and connect with usb cable and install drivers.
3. After adrivers are installed, turn off phone and disconnect USB cable
4. Open Z3x and click READ CODES in FLASH MODE.
5. While "waiting for phone" appears, press OK button on turned off phone and connect USB cable.
6. It will give you freeze lock code and if there are any more.

enjoy

[irealiti]

this driver is not good here try this the link of the driver in the descrition https://www.youtube.com/watch?v=FPfS7TYC644

[mccecc]

Selected model: E1200I
Selected port: COM64 SciCmpst Diag
Selected port speed: 921600
Reading phone info... OK
IMEI Master: 35656************
Product code: GT-E1200ZKIVOP
Phone HW: MP 0.400
Phone S/N: R21FA3Q3BG
Unlocking... OK
Done with Samsung Tool v.19.0


Done with Samsung Tool v.19.0