M620 flash always fails - GSM-Forum

meisam · 09-16-2009, 12:04

M620 having problem writing anyfirmware,please look and help me.I can erase,write eeprom to this phone without problem but it always fails to get flashed and you see the error in the log below:

Code:

Selected model: M620
Selected com port: COM11
Selected speed port: 921600
Decode *.s3 file - please wait
segments 9
segment 1 20078000 1096704 byte
segment 2 2000C000 20684 byte
segment 3 20058000 56 byte
segment 4 20058138 17710 byte
segment 5 2003803C 36684 byte
segment 6 20000000 100 byte
segment 7 20300000 29069860 byte
segment 8 2001E000 160 byte
segment 9 20016000 5056 byte
Phone must be OFF with battery
Please, connect phone and press shortly power button
Syncing phone... OK
Sending loader1... OK
Syncing phone... OK
Sending loader2... OK
Syncing phone... OK
Syncing phone... OK
Flash ID: 0100003D7E22
Syncing phone... OK
Sending *.s3 file...
Send s3 - fail
Elapsed time: 123 second, sw ver: 3.3 beta 0013
--------------------------------------------------------------------------
Selected model: M620
Selected com port: COM11
Selected speed port: 115200
Decode *.s3 file - please wait
segments 9
segment 1 20078000 1096704 byte
segment 2 2000C000 20684 byte
segment 3 20058000 56 byte
segment 4 20058138 17710 byte
segment 5 2003803C 36684 byte
segment 6 20000000 100 byte
segment 7 20300000 29069860 byte
segment 8 2001E000 160 byte
segment 9 20016000 5056 byte
Phone must be OFF with battery
Please, connect phone and press shortly power button
Syncing phone... OK
Sending loader1... OK
Syncing phone... OK
Sending loader2... OK
Syncing phone... OK
Syncing phone... OK
Flash ID: 0100003D7E22
Syncing phone... OK
Sending *.s3 file...
bad ask - +ok!
Send s3 - fail
Elapsed time: 89 second, sw ver: 3.3 beta 0013
--------------------------------------------------------------------------

alex999_ · 09-16-2009, 12:38

Code:

 Selected model: M620
Selected com port: COM2
Selected speed port: 921600
Decode *.s3 file - please wait
segments 9
segment 1 20078000 1096768 byte
segment 2 2000C000 20756 byte
segment 3 20058000 56 byte
segment 4 20058138 17976 byte
segment 5 2003803C 36696 byte
segment 6 20000000 100 byte
segment 7 20300000 27239368 byte
segment 8 2001E000 160 byte
segment 9 20016000 5056 byte
Phone must be OFF with battery
Please, connect phone and press shortly power button
Syncing phone... OK
Sending loader1... OK
Syncing phone... OK
Sending loader2... OK
Syncing phone... OK
Syncing phone... OK
Flash ID: 0100003D7E22
Syncing phone... OK
Sending *.s3 file... OK
Elapsed time: 622 second, sw ver: 3.3 beta 0013

check cable or phone hardware

meisam · 09-17-2009, 09:22

I'm using this cable for all other phones with the same connector and all operations done ok,as mentioned i can even erase it,

**blang** · 09-17-2009, 11:56

Quote:

Originally Posted by meisam

I'm using this cable for all other phones with the same connector and all operations done ok,as mentioned i can even erase it,

I try now My M620 and all is ok.

Search problem in your side.

May be phone connector not clearn, may be something with flash file, phone battery.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
D780 hang & flash always failed at slave	denard	HWK	3	06-24-2009 09:30
D780 hang & flash always failed at slave	denard	SWIFT Platform	0	06-19-2009 17:01
F480 flashing always fails	James_S	UST Pro II	3	01-29-2009 04:45
dead n6235, flash-always failed at the end.	tomlat	Nokia CDMA	1	11-10-2007 20:17
VS2 flashing always fails	kiwiboi	Infinity-Box	1	10-03-2006 09:40

09-17-2009, 09:22	#3 (permalink)
meisam No Life Poster Join Date: Feb 2005 Location: IRAN(land of heros) Age: 44 Posts: 2,680 Member: 115172 Status: Offline Thanks Meter: 212	I'm using this cable for all other phones with the same connector and all operations done ok,as mentioned i can even erase it,