Needed HELP !!!! SAMSUNG A135F Unlock Code ERROR [Answered] - GSM-Forum

jot_saggu · 03-30-2023, 14:56

Samsung A135F MCK Code calculate Fine but wont be able Calculate NCK CODE :-

Code:

[ Read Codes via Server ] Waiting ADB device... OK
[ Read Codes via Server ] Reading phone info... OK
[ Read Codes via Server ] Reading IMEI... OK
[ Read Codes via Server ] Model: SM-A135F
[ Read Codes via Server ] Android version: 12
[ Read Codes via Server ] PDA version: A135FXXU1AVD1
[ Read Codes via Server ] CSC version: A135FOLM1AVD2
[ Read Codes via Server ] Phone version: A135FXXU1AVD1
[ Read Codes via Server ] Product code: SM-A135FZKIXME
[ Read Codes via Server ] CSC country code: MALAYSIA
[ Read Codes via Server ] CSC sales code: XME
[ Read Codes via Server ] Carrier ID: TLP
[ Read Codes via Server ] Phone SN: R58Txxxx1SP
[ Read Codes via Server ] IMEI: 352x087xxxxx895
[ Read Codes via Server ] HW version: REV0.2
[ Read Codes via Server ] RF cal date: 20220415
[ Read Codes via Server ] Chip name: EXYNOS850
[ Read Codes via Server ] Modem board: SHANNON318
[ Read Codes via Server ] Security patch: 2022-03-01
[ Read Codes via Server ] Boot Warranty bit: 0
[ Read Codes via Server ] SIM State: ABSENT
[ Read Codes via Server ] Checking SIM status... OK
[ Read Codes via Server ] Initialization zTool... OK
[ Read Codes via Server ] Running zTool, please wait... OK
[ Read Codes via Server ] Initialization... error (0.)
[ Read Codes via Server ] Initialization zTool... OK
[ Read Codes via Server ] Running zTool, please wait... OK
[ Read Codes via Server ] Initialization... OK
[ Read Codes via Server ] Reading lock state... OK
[ Read Codes via Server ] Your phone is requesting a MCK(Freeze, PUK) code. What code do you want to calculate?  MCK(Freeze, PUK)
[ Read Codes via Server ] Executing... OK
[ Read Codes via Server ] Searching Ramdump interface... COM6 detected
[ Read Codes via Server ] Rebooting phone... OK
[ Read Codes via Server ] Waiting ADB device... OK
[ Read Codes via Server ] Waiting for device to become ready... OK
[ Read Codes via Server ] Reading ramdump data from phone... OK
[ Read Codes via Server ] Calculating... OK
[ Read Codes via Server ] Searching server... OK
[ Read Codes via Server ] Waiting for server answer... OK
[ Read Codes via Server ] Freeze code (MCK, PUK):  57170353
[ Read Codes via Server ] 
[ Read Codes via Server ] To calculate NCK(Network, PIN, REGIONAL) code perfom the following operations:
[ Read Codes via Server ]     1. Insert the SIM card.
[ Read Codes via Server ]     2. Enter the MCK(Freeze, PUK) code.
[ Read Codes via Server ]     3. Remove the SIM card.
[ Read Codes via Server ]     4. Reboot phone.
[ Read Codes via Server ]     5. Try again.
[ Read Codes via Server ] 
[ Read Codes via Server ] Operation: Read Codes via Server
[ Read Codes via Server ] Selected model: SM-A135F
[ Read Codes via Server ] Software version: 45.9
[ Read Codes via Server ] 
[ Read Codes via Server ] Checking Login and Password... OK
[ Read Codes via Server ] Balance: 35 crd.

nck CODE ERROR

Code:

[ Read Codes via Server ] Waiting ADB device... OK
[ Read Codes via Server ] Reading phone info... OK
[ Read Codes via Server ] Reading IMEI... OK
[ Read Codes via Server ] Model: SM-A135F
[ Read Codes via Server ] Android version: 12
[ Read Codes via Server ] PDA version: A135FXXU1AVD1
[ Read Codes via Server ] CSC version: A135FOLM1AVD2
[ Read Codes via Server ] Phone version: A135FXXU1AVD1
[ Read Codes via Server ] Product code: SM-A135FZKIXME
[ Read Codes via Server ] CSC country code: MALAYSIA
[ Read Codes via Server ] CSC sales code: XME
[ Read Codes via Server ] Carrier ID: TLP
[ Read Codes via Server ] Phone SN: R58TxxxxSP
[ Read Codes via Server ] IMEI: 3524xxxxxxxx95
[ Read Codes via Server ] HW version: REV0.2
[ Read Codes via Server ] RF cal date: 20220415
[ Read Codes via Server ] Chip name: EXYNOS850
[ Read Codes via Server ] Modem board: SHANNON318
[ Read Codes via Server ] Security patch: 2022-03-01
[ Read Codes via Server ] Boot Warranty bit: 0
[ Read Codes via Server ] SIM State: ABSENT
[ Read Codes via Server ] Checking SIM status... OK
[ Read Codes via Server ] Initialization zTool... OK
[ Read Codes via Server ] Running zTool, please wait... OK
[ Read Codes via Server ] Initialization... OK
[ Read Codes via Server ] Reading lock state... OK
[ Read Codes via Server ] Executing... OK
[ Read Codes via Server ] Searching Ramdump interface... COM6 detected
[ Read Codes via Server ] Rebooting phone... OK
[ Read Codes via Server ] Waiting ADB device... OK
[ Read Codes via Server ] Waiting for device to become ready... OK
[ Read Codes via Server ] Reading ramdump data from phone... OK
[ Read Codes via Server ] Calculating... error (1)
[ Read Codes via Server ] Could not find data. Please try again.
[ Read Codes via Server ]

Z3X · 03-30-2023, 16:44

Hello. Insert sim and press read codes, after attach log here.

jot_saggu · 04-01-2023, 07:32

Quote:

Originally Posted by Z3X

Hello. Insert sim and press read codes, after attach log here.

Code:

Operation: Read Codes via Server
Selected model: SM-A135F
Software version: 45.9

Checking Login and Password... OK
Balance: 35 crd.
You have 35 credit(s) left. This operation takes 5 credits. Attention! In case if phone asking MCK(Freeze, PUK) code, using this method will consume credits twice - first for MCK(Freeze, PUK) code and then for NCK(Network, PIN). Continue?  Yes
Waiting ADB device... OK
Reading phone info... OK
Reading IMEI... OK
Model: SM-A135F
Android version: 12
PDA version: A135FXXU1AVD1
CSC version: A135FOLM1AVD2
Phone version: A135FXXU1AVD1
Product code: SM-A135FZKIXME
CSC country code: MALAYSIA
CSC sales code: XME
Carrier ID: TLP
Phone SN: R5XXXXXX1SP
IMEI: 35240XXXXX3895
HW version: REV0.2
RF cal date: 20220415
Chip name: EXYNOS850
Modem board: SHANNON318
Security patch: 2022-03-01
Boot Warranty bit: 0
SIM State: NETWORK_SUBSET_LOCKED
Checking SIM status... error
SIM card detected, remove it

Done with Samsung Tool PRO v.45.9 [SM-A135F,Read Codes via Server]

Code:

Operation: Read Codes via Server
Selected model: SM-A135F
Software version: 45.9

Checking Login and Password... OK
Balance: 35 crd.
You have 35 credit(s) left. This operation takes 5 credits. Attention! In case if phone asking MCK(Freeze, PUK) code, using this method will consume credits twice - first for MCK(Freeze, PUK) code and then for NCK(Network, PIN). Continue?  Yes
Waiting ADB device... OK
Reading phone info... OK
Reading IMEI... OK
Model: SM-A135F
Android version: 12
PDA version: A135FXXU1AVD1
CSC version: A135FOLM1AVD2
Phone version: A135FXXU1AVD1
Product code: SM-A135FZKIXME
CSC country code: MALAYSIA
CSC sales code: XME
Carrier ID: TLP
Phone SN: R58T41S41SP
IMEI: 352408740223895
HW version: REV0.2
RF cal date: 20220415
Chip name: EXYNOS850
Modem board: SHANNON318
Security patch: 2022-03-01
Boot Warranty bit: 0
SIM State: ABSENT
Checking SIM status... OK
Initialization zTool... OK
Running zTool, please wait... OK
Initialization... OK
Reading lock state... OK
Your phone is requesting a MCK(Freeze, PUK) code. What code do you want to calculate?  NCK(Network, PIN, REGIONAL)
To calculate NCK(Network, PIN, REGIONAL) code perfom the following operations:
    1. Insert the SIM card.
    2. Enter the MCK(Freeze, PUK) code.
    3. Remove the SIM card.
    4. Reboot phone.
    5. Try again.
If you don't have the MCK(Freeze, PUK) code, then read it first.

Done with Samsung Tool PRO v.45.9 [SM-A135F,Read Codes via Server]

jot_saggu · 04-01-2023, 07:34

Quote:

Originally Posted by Z3X

Hello. Insert sim and press read codes, after attach log here.

Code:

Checking Login and Password... OK
 Balance: 35 crd.
 You have 35 credit(s) left. This operation takes 5 credits. Attention! In case if phone asking MCK(Freeze, PUK) code, using this method will consume credits twice - first for MCK(Freeze, PUK) code and then for NCK(Network, PIN). Continue?  Yes
 Waiting ADB device... OK
 Reading phone info... OK
 Reading IMEI... OK
 Model: SM-A135F
 Android version: 12
 PDA version: A135FXXU1AVD1
 CSC version: A135FOLM1AVD2
 Phone version: A135FXXU1AVD1
 Product code: SM-A135FZKIXME
 CSC country code: MALAYSIA
 CSC sales code: XME
 Carrier ID: TLP
 Phone SN: R58T41S41SP
 IMEI: 352408740223895
 HW version: REV0.2
 RF cal date: 20220415
 Chip name: EXYNOS850
 Modem board: SHANNON318
 Security patch: 2022-03-01
 Boot Warranty bit: 0
 SIM State: ABSENT
 Checking SIM status... OK
 Initialization zTool... OK
 Running zTool, please wait... OK
 Initialization... OK
 Reading lock state... OK
 Executing... OK
 Searching Ramdump interface... COM6 detected
 Rebooting phone... OK
 Waiting ADB device... OK
 Waiting for device to become ready... OK
 Reading ramdump data from phone... OK
 Calculating... error (1)
 Could not find data. Please try again.
 
 Operation: Read Codes via Server
 Selected model: SM-A135F
 Software version: 45.9
 
 Checking Login and Password... OK
 Balance: 35 crd.
 You have 35 credit(s) left. This operation takes 5 credits. Attention! In case if phone asking MCK(Freeze, PUK) code, using this method will consume credits twice - first for MCK(Freeze, PUK) code and then for NCK(Network, PIN). Continue?  Yes
 Waiting ADB device... OK
 Reading phone info... OK
 Reading IMEI... OK
 Model: SM-A135F
 Android version: 12
 PDA version: A135FXXU1AVD1
 CSC version: A135FOLM1AVD2
 Phone version: A135FXXU1AVD1
 Product code: SM-A135FZKIXME
 CSC country code: MALAYSIA
 CSC sales code: XME
 Carrier ID: TLP
 Phone SN: R5XXXXXXXSP
 IMEI: 35240XXXXXX3895
 HW version: REV0.2
 RF cal date: 20220415
 Chip name: EXYNOS850
 Modem board: SHANNON318
 Security patch: 2022-03-01
 Boot Warranty bit: 0
 SIM State: NETWORK_SUBSET_LOCKED
 Checking SIM status... error
 SIM card detected, remove it
 
 Operation: Read Codes via Server
 Selected model: SM-A135F
 Software version: 45.9
 
 Checking Login and Password... OK
 Balance: 35 crd.
 You have 35 credit(s) left. This operation takes 5 credits. Attention! In case if phone asking MCK(Freeze, PUK) code, using this method will consume credits twice - first for MCK(Freeze, PUK) code and then for NCK(Network, PIN). Continue?  Yes
 Waiting ADB device... OK
 Reading phone info... OK
 Reading IMEI... OK
 Model: SM-A135F
 Android version: 12
 PDA version: A135FXXU1AVD1
 CSC version: A135FOLM1AVD2
 Phone version: A135FXXU1AVD1
 Product code: SM-A135FZKIXME
 CSC country code: MALAYSIA
 CSC sales code: XME
 Carrier ID: TLP
 Phone SN: R5XTXXXX1SP
 IMEI: 3524CCXXXX3895
 HW version: REV0.2
 RF cal date: 20220415
 Chip name: EXYNOS850
 Modem board: SHANNON318
 Security patch: 2022-03-01
 Boot Warranty bit: 0
 SIM State: ABSENT
 Checking SIM status... OK
 Initialization zTool... OK
 Running zTool, please wait... OK
 Initialization... OK
 Reading lock state... OK
 Your phone is requesting a MCK(Freeze, PUK) code. What code do you want to calculate?  NCK(Network, PIN, REGIONAL)
 To calculate NCK(Network, PIN, REGIONAL) code perfom the following operations:
     1. Insert the SIM card.
     2. Enter the MCK(Freeze, PUK) code.
     3. Remove the SIM card.
     4. Reboot phone.
     5. Try again.
 If you don't have the MCK(Freeze, PUK) code, then read it first.

Z3X · 04-01-2023, 07:54

Provide phones full serial.

jot_saggu · 04-01-2023, 11:05

Quote:

Originally Posted by Z3X

Provide phones full serial.

already mentioned in last log

Code:

Phone SN: R58T41S41SP
 IMEI: 352408740223895

Z3X · 04-01-2023, 11:56

Refunded. We working on solution.

03-30-2023, 16:44	#2 (permalink)
Z3X Product Supporter Join Date: Feb 2008 Location: z3x Posts: 15,946 Member: 706257 Status: Offline Thanks Meter: 5,062	Hello. Insert sim and press read codes, after attach log here.

04-01-2023, 07:54	#5 (permalink)
Z3X Product Supporter Join Date: Feb 2008 Location: z3x Posts: 15,946 Member: 706257 Status: Offline Thanks Meter: 5,062	Provide phones full serial.

04-01-2023, 11:56	#7 (permalink)
Z3X Product Supporter Join Date: Feb 2008 Location: z3x Posts: 15,946 Member: 706257 Status: Offline Thanks Meter: 5,062	Refunded. We working on solution.