Post here successfully job with Z3X-BOX Samsung (2010-2018) - Page 1093 - GSM-Forum

Gambitv01 · 06-24-2016, 20:26

Operation: Unlock
Selected model: SM-G925T
Software version: 25.8

Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-G925T
Android version: 5.1.1
Product code:
Phone version: G925TUVS3DOJC
PDA version: G925TUVS3DOJC
CSC version: G925TTMB3DOJC
CSC country code: USA
CSC sales code: TMB
HW version:
Phone S/N: R1234567890
Modem board: SHANNON333
RF cal date:
IMEI:
Checking Super user right... true
Initializating zTool... OK
Running zTool, please wait...
Start... OK
Init... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
Reading nv data... OK
Checking NV data... OK
Calculating... OK
Unlocking... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.25.8

musa12 · 06-24-2016, 20:34

G925P Domestic Unlock
:6.0.1 DONE
NEXT

UNLOCK INSTRUCTIONS:
Domestic Unlock:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock Domestic' button.

Operation: Unlock SPRNT
Selected model: SM-G925P
Software version: 25.7

Waiting ADB device... OK
Reading phone info...
Model: SM-G925P
Android version: 6.0.1
Product code: Not Active
Phone version: G925PVPU3CPD3
PDA version: G925PVPU3CPD3
CSC version: G925PSPT3CPD3
CSC country code: USA
CSC sales code: SPR
HW version: G925P.02
Phone S/N: 00000000000
Modem board: MDM9635M
RF cal date: 2015.03.23
IMEI:
Checking Super user right... true
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.25.7

canliyayin · 06-25-2016, 08:27

Operation: Reset FRP/React/EE
Selected model: SM-J500FN
Selected port:
Software version: 25.8

Searching Samsung USB Flash Interface... detected COM8
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP... OK
Searching Reactivation lock... not supported
Searching EE lock... OK
Erasing EE lock... OK
Reset done
Done with Samsung Tool PRO v.25.8

.::EXTREME::. · 06-25-2016, 11:07

Code:

Waiting ADB device... OK
Reading phone info...
Model: SM-G531F
Android version: 5.1.1
Product code: SM-G531FZWAKSA
Phone version: G531FXXU1AOK3
PDA version: G531FXXU1AOH1
CSC version: 
CSC country code: 
CSC sales code: 
HW version: MP 0.200
Phone S/N: RV8H11RTNHK
Modem board: 
RF cal date: 20160125
IMEI: 
Checking Super user right... true
Reading nv data... OK
Analysing SEC file... OK
Initialization AT RIL... OK
Bypass MSL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.25.8

If phone ask codes after unlocking, use:
PUK - 12345678
PIN - 00000000

canliyayin · 06-25-2016, 11:51

Operation: Reset FRP/React/EE
Selected model: SM-G361H
Software version: 25.8

Searching Samsung USB Flash Interface... detected COM8
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP... OK
Searching Reactivation lock... not supported
Searching EE lock... OK
Erasing EE lock... OK
Reset done

Done with Samsung Tool PRO v.25.8

tharakax1 · 06-25-2016, 11:54

add reactivation lock remove new samsung models

tharakax1 · 06-25-2016, 12:07

add samsung sert file
for new samsung phones

ribbentrop · 06-25-2016, 12:58

Just choose J500H model:

Code:

Operation: Reset FRP/React/EE
Selected model: SM-J500H
Selected port: 
Software version: 25.8

Searching Samsung USB Flash Interface... detected COM8
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP... OK
Searching Reactivation lock... not supported
Searching EE lock... OK
Erasing EE lock... OK
Reset done

Done with Samsung Tool PRO v.25.8

ak0101 · 06-25-2016, 16:10

BACKUP INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Enable 'USB debugging' in
'Settings'-'Developer options' for Android 4.0 - 4.1.2 or
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options' in Android 4.2+.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read EFS' button to read backup or 'Write EFS' to restore.
6. Press 'Read CERT' button to read certificates or 'Write CERT' to restore.
7. Press 'Write NV DATA' if you need to restore NV backup.

Operation: Write CERT
Selected model: SM-J700H
Software version: 25.8

Checking certificate file... OK
KEY ID: 0901
Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-J700H
Android version: 5.1.1
Product code:
Phone version: J700HXXU2APC4
PDA version: J700HXXU2APC5
CSC version: J700HOXY2APC4
CSC country code: Central Asia
CSC sales code: CAC
HW version:
Phone S/N: 00000000000
Modem board: SHANNON310
RF cal date:
IMEI:
Checking Super user right... true
Reading nv data... OK
Checking NV data... OK OK
Rebooting phone... OK
Write CERT done
Done with Samsung Tool PRO v.25.8

dilbarkhan · 06-25-2016, 17:36

Any Expert Can tell me how to unlock Scv31 Au S6 Edge

Sent from my iPhone using Tapatalk

Tanha0321 · 06-26-2016, 17:25

Code:

Operation: Unlock SPRNT
Selected model: SPH-L720T
Selected port: COM18 USB Serial Port
Software version: 25.7

Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SPH-L720T
Android version: 5.0.1
Product code: Not Active
Phone version: L720TVPUCOK3
PDA version: L720TVPUCOK3
CSC version: L720TSPTCOK3
CSC country code: USA
CSC sales code: BST
HW version: L720T.03
Phone S/N: 00000000000
Modem board: MDM9615M
RF cal date: 2015.10.12
IMEI: 
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.25.7

kajan92 · 06-26-2016, 20:46

imei ; 355060054597534

KingRool · 06-27-2016, 03:15

Galaxy Note 3 Neo N7505 successfully unlocked

Code:

Operation: Unlock
Selected model: SM-N7505
Software version: 25.8

Waiting ADB device... OK
Reading phone info...
Model: SM-N7505
Android version: 4.4.2
Product code: SM-N7505ZKAETL
Phone version: N7505XXUCNG2
PDA version: N7505XXUCNH1
CSC version: N7505OXXCNH1
CSC country code: Czech Republic
CSC sales code: ETL
HW version: MP 0.400
Phone S/N: RF8F20Q2E2E
Modem board: XMM7160
RF cal date: 2014.2.22
IMEI: 3523230********
Checking Super user right... true
Reading nv data... OK
Checking magic... OK
Running zTool, please wait... OK
Detected new type of security version 0
Calculating... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.25.8

KingRool · 06-27-2016, 03:22

Galaxy Note 3 Neo N7505 successfully unlocked

Code:

Operation: Unlock
Selected model: SM-N7505
Software version: 25.8

Waiting ADB device... OK
Reading phone info...
Model: SM-N7505
Android version: 4.4.2
Product code: SM-N7505ZKAETL
Phone version: N7505XXUCNG2
PDA version: N7505XXUCNH1
CSC version: N7505OXXCNH1
CSC country code: Czech Republic
CSC sales code: ETL
HW version: MP 0.400
Phone S/N: RF8F20Q2E2E
Modem board: XMM7160
RF cal date: 2014.2.22
IMEI: 3523230********
Checking Super user right... true
Reading nv data... OK
Checking magic... OK
Running zTool, please wait... OK
Detected new type of security version 0
Calculating... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.25.8

KingRool · 06-27-2016, 03:25

Galaxy Note 3 Neo N7505 successfully unlocked

Code:

Operation: Unlock
Selected model: SM-N7505
Software version: 25.8

Waiting ADB device... OK
Reading phone info...
Model: SM-N7505
Android version: 4.4.2
Product code: SM-N7505ZKAETL
Phone version: N7505XXUCNG2
PDA version: N7505XXUCNH1
CSC version: N7505OXXCNH1
CSC country code: Czech Republic
CSC sales code: ETL
HW version: MP 0.400
Phone S/N: RF8F20Q2E2E
Modem board: XMM7160
RF cal date: 2014.2.22
IMEI: 3523230********
Checking Super user right... true
Reading nv data... OK
Checking magic... OK
Running zTool, please wait... OK
Detected new type of security version 0
Calculating... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.25.8

06-25-2016, 08:27	#16383 (permalink)
canliyayin No Life Poster Join Date: Jul 2006 Location: TÜRKİYE Posts: 1,252 Member: 311558 Status: Offline Thanks Meter: 476	j5 Operation: Reset FRP/React/EE Selected model: SM-J500FN Selected port: Software version: 25.8 Searching Samsung USB Flash Interface... detected COM8 Setup connection... OK Reading PIT from phone... OK Searching FRP lock... OK Erasing FRP... OK Searching Reactivation lock... not supported Searching EE lock... OK Erasing EE lock... OK Reset done Done with Samsung Tool PRO v.25.8

06-25-2016, 11:51	#16385 (permalink)
canliyayin No Life Poster Join Date: Jul 2006 Location: TÜRKİYE Posts: 1,252 Member: 311558 Status: Offline Thanks Meter: 476	g361h done Operation: Reset FRP/React/EE Selected model: SM-G361H Software version: 25.8 Searching Samsung USB Flash Interface... detected COM8 Setup connection... OK Reading PIT from phone... OK Searching FRP lock... OK Erasing FRP... OK Searching Reactivation lock... not supported Searching EE lock... OK Erasing EE lock... OK Reset done Done with Samsung Tool PRO v.25.8

06-25-2016, 11:54	#16386 (permalink)
tharakax1 Freak Poster Join Date: Mar 2015 Location: srilanka Posts: 212 Member: 2363369 Status: Offline Thanks Meter: 95	best root app add reactivation lock remove new samsung models

06-25-2016, 12:07	#16387 (permalink)
tharakax1 Freak Poster Join Date: Mar 2015 Location: srilanka Posts: 212 Member: 2363369 Status: Offline Thanks Meter: 95	cert file add samsung sert file for new samsung phones

06-25-2016, 16:10	#16389 (permalink)
ak0101 No Life Poster Join Date: May 2005 Location: Tirana Age: 43 Posts: 791 Member: 143851 Status: Offline Thanks Meter: 162	J700h write cert ok BACKUP INSTRUCTIONS: Phone must be rooted! If the software can't root the phone automatically, then you must root your device manually. 1. Power on the phone. 2. Enable 'USB debugging' in 'Settings'-'Developer options' for Android 4.0 - 4.1.2 or tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options' in Android 4.2+. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Read EFS' button to read backup or 'Write EFS' to restore. 6. Press 'Read CERT' button to read certificates or 'Write CERT' to restore. 7. Press 'Write NV DATA' if you need to restore NV backup. Operation: Write CERT Selected model: SM-J700H Software version: 25.8 Checking certificate file... OK KEY ID: 0901 Waiting ADB device... Please, allow USB debugging on phone... OK Reading phone info... Model: SM-J700H Android version: 5.1.1 Product code: Phone version: J700HXXU2APC4 PDA version: J700HXXU2APC5 CSC version: J700HOXY2APC4 CSC country code: Central Asia CSC sales code: CAC HW version: Phone S/N: 00000000000 Modem board: SHANNON310 RF cal date: IMEI: Checking Super user right... true Reading nv data... OK Checking NV data... OK OK Rebooting phone... OK Write CERT done Done with Samsung Tool PRO v.25.8

06-24-2016, 20:26	#16381 (permalink)
Gambitv01 No Life Poster Join Date: Dec 2010 Location: Romania Posts: 1,532 Member: 1475064 Status: Offline Thanks Meter: 347	Operation: Unlock Selected model: SM-G925T Software version: 25.8 Waiting ADB device... Please, allow USB debugging on phone... OK Reading phone info... Model: SM-G925T Android version: 5.1.1 Product code: Phone version: G925TUVS3DOJC PDA version: G925TUVS3DOJC CSC version: G925TTMB3DOJC CSC country code: USA CSC sales code: TMB HW version: Phone S/N: R1234567890 Modem board: SHANNON333 RF cal date: IMEI: Checking Super user right... true Initializating zTool... OK Running zTool, please wait... Start... OK Init... OK Generate and check client proof... OK Verify proof by client... OK Reading data... OK Reading nv data... OK Checking NV data... OK Calculating... OK Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.25.8

06-24-2016, 20:34	#16382 (permalink)
musa12 Freak Poster Join Date: Jul 2015 Posts: 114 Member: 2428732 Status: Offline Thanks Meter: 22	G925P Domestic Unlock :6.0.1 DONE NEXT UNLOCK INSTRUCTIONS: Domestic Unlock: 1. Power on the phone. 2. Enable 'USB debugging' in 'Settings'-'Developer options', tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Unlock Domestic' button. Operation: Unlock SPRNT Selected model: SM-G925P Software version: 25.7 Waiting ADB device... OK Reading phone info... Model: SM-G925P Android version: 6.0.1 Product code: Not Active Phone version: G925PVPU3CPD3 PDA version: G925PVPU3CPD3 CSC version: G925PSPT3CPD3 CSC country code: USA CSC sales code: SPR HW version: G925P.02 Phone S/N: 00000000000 Modem board: MDM9635M RF cal date: 2015.03.23 IMEI: Checking Super user right... true Initialization AT RIL... OK Unlocking... OK Rebooting phone... OK Done with Samsung Tool PRO v.25.7

06-25-2016, 17:36	#16390 (permalink)
dilbarkhan Freak Poster Join Date: Sep 2012 Location: Quetta, chaman.pk Posts: 493 Member: 1814786 Status: Offline Sonork: 100.1619255 Thanks Meter: 37	Any Expert Can tell me how to unlock Scv31 Au S6 Edge Sent from my iPhone using Tapatalk

06-26-2016, 20:46	#16392 (permalink)
kajan92 Junior Member Join Date: May 2016 Posts: 1 Member: 2579345 Status: Offline Thanks Meter: 0	unlock gt-s7560m imei ; 355060054597534

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Post here successfully unlock or IMEI repair LG	andrew_tm	Z3X-Team Products	1841	07-06-2022 14:14
Post here successfully unlock or IMEI repair Infinity Box	R@ZIB-BD	Infinity-Box	3	07-04-2014 16:37
Post here successfully unlock or IMEI repair LG	R@ZIB-BD	Z3X-Team Products	2	02-01-2011 17:29