Post here successfully job with Z3X-BOX Samsung (2010-2018) - Page 1254 - GSM-Forum

orhan5 · 07-28-2017, 08:25

BACKUP INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options' for Android 4.0 - 4.1.2 or
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options' in Android 4.2+.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read EFS' button to read backup or 'Write EFS' to restore.
6. Press 'Read CERT' button to read certificates or 'Write CERT' to restore.
7. Press 'Write NV DATA' if you need to restore NV backup.

Operation: Write CERT
Selected model: GT-I9500
Software version: 28.9

Checking CERT file... OK
KEY ID: 0833
Waiting ADB device... OK
Reading phone info...
Model: GT-I9500
Android version: 5.0.1
Product code: GT-I9500ZWAACR
Phone version: I9500XXUHOG2
PDA version: I9500XXUHOH6
CSC version: I9500OJVHOG3
CSC country code: GHANA
CSC sales code: ACR
HW version: MP 0.800
Phone SN: RF1D614MZPY
Modem board: XMM6360
RF cal date: 2013.6.7
IMEI:
Checking Super user right... true
Reading NV data... OK
Checking magic... OK
Running zTool, please wait... OK
Detected new type of security version 1
Calculating... OK
Writing NV Data... OK
Rebooting phone... OK
Write CERT done

Done with Samsung Tool PRO v.28.9

orhan5 · 07-28-2017, 09:03

BACKUP INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options' for Android 4.0 - 4.1.2 or
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options' in Android 4.2+.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read EFS' button to read backup or 'Write EFS' to restore.
6. Press 'Read CERT' button to read certificates or 'Write CERT' to restore.
7. Press 'Write NV DATA' if you need to restore NV backup.

Operation: Write CERT
Selected model: GT-I9500
Software version: 28.9

Checking CERT file... OK
KEY ID: 0833
Waiting ADB device... OK
Reading phone info...
Model: GT-I9500
Android version: 5.0.1
Product code: GT-I9500ZWAACR
Phone version: I9500XXUHOG2
PDA version: I9500XXUHOH6
CSC version: I9500OJVHOG3
CSC country code: GHANA
CSC sales code: ACR
HW version: MP 0.800
Phone SN: RF1D614MZPY
Modem board: XMM6360
RF cal date: 2013.6.7
IMEI:
Checking Super user right... true
Reading NV data... OK
Checking magic... OK
Running zTool, please wait... OK
Detected new type of security version 1
Calculating... OK
Writing NV Data... OK
Rebooting phone... OK
Write CERT done

Done with Samsung Tool PRO v.28.9

ferouz kassim · 07-28-2017, 10:11

Waiting ADB device... OK
Reading phone info...
Model: SM-J710F
Android version: 6.0.1
Product code: SM-J710FZWDMWD
Phone version: J710FXXU3AQF4
PDA version: J710FXXU3AQF8
CSC version: J710FOXY3AQF2
CSC country code: Russia
CSC sales code: SER
HW version: MP 0.300
Phone SN: 00000000000
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2017-06-01
RF cal date: 20160901
IMEI:
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
HWID: 8E 01 00 00 00 00 00 00 00 00 00 00 53 96 6B 36
Calculating... OK
Repairing... OK
Writing NV data... OK
Rebooting phone... OK
Repair done

Done with Samsung Tool PRO v.28.6

mishaelwillo · 07-28-2017, 16:35

J320AG FRP Removed using J320N0 Successful

Operation: Reset FRP/React/EE
Selected model: SM-J320N0
Software version: 28.9

Searching Samsung USB Flash interface... COM29 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.28.9

Repaircell · 07-28-2017, 20:27

Operation: Reset FRP
Selected model: SM-G935P
Software version: 29.0

Waiting ADB device... OK
Reading phone info...
Model: SM-G950U
Android version: 7.0
Product code: SM-G950UZKASPR
Phone version: G950USQU1AQDE
PDA version: G950USQU1AQDE
CSC version: G950UOYN1AQDE
CSC country code: USA
CSC sales code: SPR
HW version: REV1.0
Phone SN: R28J52L5XXX
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2017-04-01
RF cal date: 2017.05.22
IMEI:
Bypass FRP... OK
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.29.0UNBAR

pavaldespino · 07-28-2017, 22:26

Operation: Read Codes via Server
Selected model: SM-G935A
Selected port: COM6 Z3X BOX Serial Port
Software version: 29.0

Checking Login and Password... OK
Ballance: 50 crd.
Waiting ADB device... OK
Reading phone info...
Model: SAMSUNG-SM-G935A
Android version: 7.0
Product code: SM-G935AZDAATT
Phone version: G935AUCS4BQE1
PDA version: G935AUCS4BQE1
CSC version: G935AATT4BQE1
CSC country code: USA
CSC sales code: ATT
HW version: REV0.7
Phone SN: RF8H92LW5ZR
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2017-05-01
RF cal date: 2016.09.23
IMEI:
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM193 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 91426263
NET lock: 92405750
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.29.0

Taguro-GSMLover · 07-29-2017, 06:15

Operation: Read Codes
Selected model: SM-G920A
Selected port: COM96 Z3X BOX Serial Port
Software version: 29.0

Waiting ADB device... OK
Reading phone info...
Model: SAMSUNG-SM-G920A
Android version: 6.0.1
Product code: SM2G920AZKAATT
Phone version: G920AUCS5DPI1
PDA version: G920AUCS5DPI1
CSC version: G920AATT5DPI1
CSC country code: USA
CSC sales code: ATT
HW version: REV1.0
Phone SN: RF8H72QJ4HJ
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2016-09-01
RF cal date: 20160728
IMEI:
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Initialization zTool... OK
Running zTool, please wait... OK
HWID: 18 F5 B9 8E 95 04 00 00 00 00 00 00 00 00 00 00
Calculating... OK
Checking hash file... OK
Please wait, calculating codes... OK (time - 00:00:01)
Freeze code: 18382627
NET lock: 24968616
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool PRO v.29.0

canliyayin · 07-29-2017, 11:15

If you are looking for 'Repair Network' function then you should use 'Patch Certificate'

Waiting ADB device... OK
Reading phone info...
Model: GT-I9060I
Android version: 4.4.4
Product code: GT-I9060ZWSCAM
Phone version: I9060IXXU0AOG3
PDA version: I9060IXXU0AOH1
CSC version: I9060IOJV0AOB1
CSC country code: THAILAND
CSC sales code: CAM
HW version: MP 0.200
Phone SN: RV1H11B8W2R
Modem board: sc7730s
RF cal date: 20160202
IMEI: 356471007695441
Checking Super user right... true
Checking MSL... OK
Initialization AT RIL... OK
Bypass MSL OK
Repairing IMEI... OK
Rebooting phone... OK
Repair done
Done with Samsung Tool PRO v.29.0

gracy_elec · 07-29-2017, 15:19

Successfully REMOVE SAMSUNG REACTIVATION LOCK(SAMSUNG J200G)USB

Operation: Reset FRP/React/EE
Selected model: SM-J200G
Software version: 29.0

Searching Samsung USB Flash interface... COM3 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.29.0

THANKS Z3X-BOX TEAM

qtouch · 07-29-2017, 18:44

UNLOCK INSTRUCTIONS:
To reset Pattern lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset Pattern Lock' button.

To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' to deactivate Google account activation lock.

To reset Google account activation or Samsung reactivation lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
(Sometimes needs to perform 'wipe data/factory reset' once more, to complete this locks removal.)

Operation: Reset FRP/React/EE
Selected model: SM-G935T
Software version: 29.0

Checking local file... OK
Searching server... OK
Compare local and server file... OK (up to date)
Searching USB Flash interface... COM3 detected
Setup connection... OK
Reading data from phone... OK
Sending data to phone... OK
Waiting ADB device... OK
Reading phone info...
Model: SM-G935T
Android version: 6.0.1
Product code:
Phone version:
PDA version: G935TUVU4APK1
CSC version: G935TTMB4APK1
CSC country code: USA
CSC sales code: TMB
HW version:
Phone SN: RF8HB1XFM5X
Chip name: MSM8996
Modem board:
Security patch: 2016-11-01
RF cal date:
IMEI:
Checking Super user right... true
Erasing FRP... OK
Restore original kernel? Yes
Checking local file... OK
Searching server... OK
Compare local and server file... OK (up to date)
Restoring kernel... OK
Rebooting phone... OK
Reset FRP done

Done with Samsung Tool PRO v.29.0

nafanya · 07-30-2017, 10:59

Software version: 28.9

Waiting ADB device... OK
Reading phone info...
Model: SM-A320F
Android version: 6.0.1
Product code: SM-A320FZBDMID
Phone version: A320FXXU1AQA1
PDA version: A320FXXU1AQA3
CSC version: A320FOJV1AQA2
CSC country code: Iraq
CSC sales code: MID
HW version: MP 0.300
Phone SN: R28J32E
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2017-01-01
RF cal date: 20170321
IMEI:
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
HWID: 0E 04 00 00 00 00 00 00 00 00 00 00 64 4D E6 16
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.28.9

wsmobile · 07-30-2017, 11:17

Operation: Unlock
Selected model: SM-J710F
Software version: 29.0

Searching Samsung modem... detected COM180
Reading phone info... OK
Model: SM-J710F
AP version: J710FXXU2AQB3
CSC version: J710FOJV2AQB2
CP version: J710FXXU3AQD1
Product code: SM-J710FZDDTHR
Phone SN: RF8J51KYE5J
Unique number: CAJ03AD384D2F44
Reading IMEI... OK
IMEI: 358662081008398 (SIGN: OK)
IMEI 2: 358663081008396 (SIGN: OK)
Reading data from phone... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.29.0

bright hlatini · 07-30-2017, 13:46

SAMSUNG SM A300FU NETWORK UNLOCK DONE

UNLOCK INSTRUCTIONS:
Micro-USB cable:
1. Phone must be powered on.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and choose 'DM/DUN over HSIC' (ignore it, if it's not available).
4. Reboot phone.
Or use 'Activate Diag' function from 'Repair' tab.
5. Connect USB cable, install drivers if needed.
6. Select Samsung diagnostic port in port settings.
7. Press 'Unlock' button for direct unlock.

Operation: Unlock
Selected model: SM-A300FU
Selected port: COM72 SAMSUNG Mobile USB Serial Port
Software version: 29.0

Reading phone info...
Reading IMEI... OK
IMEI: 35XXXXXXXXXX
Unlocking... OK
Reseting... OK
Unlock done

Done with Samsung Tool PRO v.29.0

EjazATF · 07-30-2017, 15:10

SM-G935F
FRP Removal Completed Successfully

Code:

Operation: Reset FRP UFS
Selected model: SM-G935F
Selected port: COM3 Z3X BOX Serial Port
Software version: 29.0

Hold 'Vol down' and press 'POWER ON' for 2-3 seconds
Checking phone at COM3 OK
Phone detected, do not release 'Vol down'
Reading data from phone... OK
Release 'Vol down' now
Comparing selected model... match (G935F)
Setup connection... OK
Reseting FRP... OK
Rebooting phone... OK
Reset FRP done

Done with Samsung Tool PRO v.29.0

wsmobile · 07-31-2017, 04:40

Operation: Unlock
Selected model: SM-G930F
Software version: 29.0

Searching Samsung modem... detected COM181
Reading phone info... OK
Model: SM-G930F
AP version: G930FXXS1DQG4
CSC version: G930FDBT1DQD1
CP version: G930FXXU1APJ1
Product code: DBT
Phone SN: R58H83QA17H
Unique number: AD061603090FE6A9AD
Reading IMEI... OK
IMEI: 359469079819680 (SIGN: OK)
Reading data from phone... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.29.0

07-28-2017, 08:25	#18796 (permalink)
orhan5 No Life Poster Join Date: Sep 2016 Location: IN THIS WORLD Age: 33 Posts: 1,174 Member: 2621892 Status: Offline Sonork: 1677742 Thanks Meter: 456	wite cert done BACKUP INSTRUCTIONS: Phone must be rooted! If the software can't root the phone automatically, then you must root your device manually. 1. Power on the phone. 2. Enable 'USB debugging' in 'Settings'-'Developer options' for Android 4.0 - 4.1.2 or tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options' in Android 4.2+. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Read EFS' button to read backup or 'Write EFS' to restore. 6. Press 'Read CERT' button to read certificates or 'Write CERT' to restore. 7. Press 'Write NV DATA' if you need to restore NV backup. Operation: Write CERT Selected model: GT-I9500 Software version: 28.9 Checking CERT file... OK KEY ID: 0833 Waiting ADB device... OK Reading phone info... Model: GT-I9500 Android version: 5.0.1 Product code: GT-I9500ZWAACR Phone version: I9500XXUHOG2 PDA version: I9500XXUHOH6 CSC version: I9500OJVHOG3 CSC country code: GHANA CSC sales code: ACR HW version: MP 0.800 Phone SN: RF1D614MZPY Modem board: XMM6360 RF cal date: 2013.6.7 IMEI: Checking Super user right... true Reading NV data... OK Checking magic... OK Running zTool, please wait... OK Detected new type of security version 1 Calculating... OK Writing NV Data... OK Rebooting phone... OK Write CERT done Done with Samsung Tool PRO v.28.9

07-28-2017, 09:03	#18797 (permalink)
orhan5 No Life Poster Join Date: Sep 2016 Location: IN THIS WORLD Age: 33 Posts: 1,174 Member: 2621892 Status: Offline Sonork: 1677742 Thanks Meter: 456	wite cert done BACKUP INSTRUCTIONS: Phone must be rooted! If the software can't root the phone automatically, then you must root your device manually. 1. Power on the phone. 2. Enable 'USB debugging' in 'Settings'-'Developer options' for Android 4.0 - 4.1.2 or tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options' in Android 4.2+. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Read EFS' button to read backup or 'Write EFS' to restore. 6. Press 'Read CERT' button to read certificates or 'Write CERT' to restore. 7. Press 'Write NV DATA' if you need to restore NV backup. Operation: Write CERT Selected model: GT-I9500 Software version: 28.9 Checking CERT file... OK KEY ID: 0833 Waiting ADB device... OK Reading phone info... Model: GT-I9500 Android version: 5.0.1 Product code: GT-I9500ZWAACR Phone version: I9500XXUHOG2 PDA version: I9500XXUHOH6 CSC version: I9500OJVHOG3 CSC country code: GHANA CSC sales code: ACR HW version: MP 0.800 Phone SN: RF1D614MZPY Modem board: XMM6360 RF cal date: 2013.6.7 IMEI: Checking Super user right... true Reading NV data... OK Checking magic... OK Running zTool, please wait... OK Detected new type of security version 1 Calculating... OK Writing NV Data... OK Rebooting phone... OK Write CERT done Done with Samsung Tool PRO v.28.9

07-28-2017, 20:27	#18800 (permalink)
Repaircell Insane Poster Join Date: Sep 2014 Location: UNITED STATES Age: 37 Posts: 91 Member: 2266076 Status: Offline Sonork: Propery Thanks Meter: 19	FRP Done G950U Sprint Selected model G935p Operation: Reset FRP Selected model: SM-G935P Software version: 29.0 Waiting ADB device... OK Reading phone info... Model: SM-G950U Android version: 7.0 Product code: SM-G950UZKASPR Phone version: G950USQU1AQDE PDA version: G950USQU1AQDE CSC version: G950UOYN1AQDE CSC country code: USA CSC sales code: SPR HW version: REV1.0 Phone SN: R28J52L5XXX Chip name: MSM8998 Modem board: MSM8998 Security patch: 2017-04-01 RF cal date: 2017.05.22 IMEI: Bypass FRP... OK For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset' Done with Samsung Tool PRO v.29.0UNBAR

07-28-2017, 22:26	#18801 (permalink)
pavaldespino Junior Member Join Date: Sep 2015 Posts: 1 Member: 2454331 Status: Offline Thanks Meter: 0	Unlock done G935A 7.0 Operation: Read Codes via Server Selected model: SM-G935A Selected port: COM6 Z3X BOX Serial Port Software version: 29.0 Checking Login and Password... OK Ballance: 50 crd. Waiting ADB device... OK Reading phone info... Model: SAMSUNG-SM-G935A Android version: 7.0 Product code: SM-G935AZDAATT Phone version: G935AUCS4BQE1 PDA version: G935AUCS4BQE1 CSC version: G935AATT4BQE1 CSC country code: USA CSC sales code: ATT HW version: REV0.7 Phone SN: RF8H92LW5ZR Chip name: MSM8996 Modem board: MSM8996 Security patch: 2017-05-01 RF cal date: 2016.09.23 IMEI: Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Searching Ramdump interface... COM193 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Freeze code: 91426263 NET lock: 92405750 SUB lock: 00000000 SP lock: 00000000 CP lock: 00000000 For check lock status: *#7465625# Done with Samsung Tool PRO v.29.0

07-29-2017, 11:15	#18803 (permalink)
canliyayin No Life Poster Join Date: Jul 2006 Location: TÜRKİYE Posts: 1,252 Member: 311558 Status: Offline Thanks Meter: 476	i9060i ds log If you are looking for 'Repair Network' function then you should use 'Patch Certificate' Waiting ADB device... OK Reading phone info... Model: GT-I9060I Android version: 4.4.4 Product code: GT-I9060ZWSCAM Phone version: I9060IXXU0AOG3 PDA version: I9060IXXU0AOH1 CSC version: I9060IOJV0AOB1 CSC country code: THAILAND CSC sales code: CAM HW version: MP 0.200 Phone SN: RV1H11B8W2R Modem board: sc7730s RF cal date: 20160202 IMEI: 356471007695441 Checking Super user right... true Checking MSL... OK Initialization AT RIL... OK Bypass MSL OK Repairing IMEI... OK Rebooting phone... OK Repair done Done with Samsung Tool PRO v.29.0

07-28-2017, 10:11	#18798 (permalink)
ferouz kassim No Life Poster Join Date: May 2014 Location: UGANDA Posts: 801 Member: 2185549 Status: Offline Thanks Meter: 535	Waiting ADB device... OK Reading phone info... Model: SM-J710F Android version: 6.0.1 Product code: SM-J710FZWDMWD Phone version: J710FXXU3AQF4 PDA version: J710FXXU3AQF8 CSC version: J710FOXY3AQF2 CSC country code: Russia CSC sales code: SER HW version: MP 0.300 Phone SN: 00000000000 Chip name: EXYNOS7870 Modem board: SHANNON315 Security patch: 2017-06-01 RF cal date: 20160901 IMEI: Checking Super user right... true Reading NV data... OK Checking NV data... OK Reading data... OK Detecting MODEM... OK Reading MODEM... OK Calculating... OK Writing zTool... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data... OK HWID: 8E 01 00 00 00 00 00 00 00 00 00 00 53 96 6B 36 Calculating... OK Repairing... OK Writing NV data... OK Rebooting phone... OK Repair done Done with Samsung Tool PRO v.28.6

07-28-2017, 16:35	#18799 (permalink)
mishaelwillo Freak Poster Join Date: Jul 2005 Location: Portmore, Jamaica Age: 52 Posts: 290 Member: 160245 Status: Offline Thanks Meter: 19	J320AG FRP Removed using J320N0 Successful Operation: Reset FRP/React/EE Selected model: SM-J320N0 Software version: 28.9 Searching Samsung USB Flash interface... COM29 detected Setup connection... OK Reading PIT from phone... OK Searching FRP lock... OK Erasing FRP lock... OK Reset done For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset' Done with Samsung Tool PRO v.28.9

07-29-2017, 06:15	#18802 (permalink)
Taguro-GSMLover No Life Poster Join Date: Jan 2017 Location: Soul Society Posts: 581 Member: 2669319 Status: Offline Thanks Meter: 421	Operation: Read Codes Selected model: SM-G920A Selected port: COM96 Z3X BOX Serial Port Software version: 29.0 Waiting ADB device... OK Reading phone info... Model: SAMSUNG-SM-G920A Android version: 6.0.1 Product code: SM2G920AZKAATT Phone version: G920AUCS5DPI1 PDA version: G920AUCS5DPI1 CSC version: G920AATT5DPI1 CSC country code: USA CSC sales code: ATT HW version: REV1.0 Phone SN: RF8H72QJ4HJ Chip name: EXYNOS7420 Modem board: SHANNON333 Security patch: 2016-09-01 RF cal date: 20160728 IMEI: Checking Super user right... true Reading NV data... OK Checking NV data... OK Initialization zTool... OK Running zTool, please wait... OK HWID: 18 F5 B9 8E 95 04 00 00 00 00 00 00 00 00 00 00 Calculating... OK Checking hash file... OK Please wait, calculating codes... OK (time - 00:00:01) Freeze code: 18382627 NET lock: 24968616 SUB lock: 00000000 SP lock: 00000000 CP lock: 00000000 SIM lock: 00000000 For check lock status: *#7465625# Done with Samsung Tool PRO v.29.0

07-29-2017, 15:19	#18804 (permalink)
gracy_elec No Life Poster Join Date: Feb 2005 Location: GSM WORLD Posts: 2,079 Member: 118520 Status: Offline Thanks Meter: 3,551	Samsung Tool PRO 29.0 Successfully REMOVE SAMSUNG REACTIVATION LOCK(SAMSUNG J200G)USB Operation: Reset FRP/React/EE Selected model: SM-J200G Software version: 29.0 Searching Samsung USB Flash interface... COM3 detected Setup connection... OK Reading PIT from phone... OK Searching FRP lock... OK Erasing FRP lock... OK Reset done For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset' Done with Samsung Tool PRO v.29.0 THANKS Z3X-BOX TEAM

07-29-2017, 18:44	#18805 (permalink)
qtouch Freak Poster Join Date: Nov 2006 Location: NJ, USA Posts: 454 Member: 399404 Status: Offline Thanks Meter: 70	UNLOCK INSTRUCTIONS: To reset Pattern lock: 1. Power on the phone in download mode (turn off phone, press vol.down + home + power). 2. Connect the phone to PC with USB cable, install drivers if needed. 3. Press 'Reset Pattern Lock' button. To reset Google account activation lock: 1. ADB must be activated in any way (you can flash sBoot from combination firmware, make sure, that you are not upgrade sBoot). 2. Connect the phone to PC with USB cable, install drivers if needed. 3. Select device in ADB settings. 4. Press 'Reset FRP' to deactivate Google account activation lock. To reset Google account activation or Samsung reactivation lock: 1. Power on the phone in download mode (turn off phone, press vol.down + home + power). 2. Connect the phone to PC with USB cable, install drivers if needed. 3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock. (Sometimes needs to perform 'wipe data/factory reset' once more, to complete this locks removal.) Operation: Reset FRP/React/EE Selected model: SM-G935T Software version: 29.0 Checking local file... OK Searching server... OK Compare local and server file... OK (up to date) Searching USB Flash interface... COM3 detected Setup connection... OK Reading data from phone... OK Sending data to phone... OK Waiting ADB device... OK Reading phone info... Model: SM-G935T Android version: 6.0.1 Product code: Phone version: PDA version: G935TUVU4APK1 CSC version: G935TTMB4APK1 CSC country code: USA CSC sales code: TMB HW version: Phone SN: RF8HB1XFM5X Chip name: MSM8996 Modem board: Security patch: 2016-11-01 RF cal date: IMEI: Checking Super user right... true Erasing FRP... OK Restore original kernel? Yes Checking local file... OK Searching server... OK Compare local and server file... OK (up to date) Restoring kernel... OK Rebooting phone... OK Reset FRP done Done with Samsung Tool PRO v.29.0

07-30-2017, 10:59	#18806 (permalink)
nafanya No Life Poster Join Date: Nov 2002 Location: Russia norten-caucasus Age: 52 Posts: 714 Member: 18234 Status: Offline Thanks Meter: 97	Software version: 28.9 Waiting ADB device... OK Reading phone info... Model: SM-A320F Android version: 6.0.1 Product code: SM-A320FZBDMID Phone version: A320FXXU1AQA1 PDA version: A320FXXU1AQA3 CSC version: A320FOJV1AQA2 CSC country code: Iraq CSC sales code: MID HW version: MP 0.300 Phone SN: R28J32E Chip name: EXYNOS7870 Modem board: SHANNON315 Security patch: 2017-01-01 RF cal date: 20170321 IMEI: Checking Super user right... true Reading NV data... OK Checking NV data... OK Reading data... OK Detecting MODEM... OK Reading MODEM... OK Calculating... OK Writing zTool... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data... OK HWID: 0E 04 00 00 00 00 00 00 00 00 00 00 64 4D E6 16 Calculating... OK Unlocking... OK Writing NV data... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.28.9

07-30-2017, 11:17	#18807 (permalink)
wsmobile No Life Poster Join Date: May 2009 Location: pattaya Posts: 1,104 Member: 1043111 Status: Offline Sonork: 1000.2 Thanks Meter: 385	Operation: Unlock Selected model: SM-J710F Software version: 29.0 Searching Samsung modem... detected COM180 Reading phone info... OK Model: SM-J710F AP version: J710FXXU2AQB3 CSC version: J710FOJV2AQB2 CP version: J710FXXU3AQD1 Product code: SM-J710FZDDTHR Phone SN: RF8J51KYE5J Unique number: CAJ03AD384D2F44 Reading IMEI... OK IMEI: 358662081008398 (SIGN: OK) IMEI 2: 358663081008396 (SIGN: OK) Reading data from phone... OK Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.29.0

07-30-2017, 13:46	#18808 (permalink)
bright hlatini No Life Poster Join Date: Jul 2011 Location: malawi Posts: 1,121 Member: 1614640 Status: Offline Thanks Meter: 468	SAMSUNG SM A300FU NETWORK UNLOCK DONE UNLOCK INSTRUCTIONS: Micro-USB cable: 1. Phone must be powered on. 2. Type #0808# and select 'DM+MODEM+ADB'. 3. Type #9090# and choose 'DM/DUN over HSIC' (ignore it, if it's not available). 4. Reboot phone. Or use 'Activate Diag' function from 'Repair' tab. 5. Connect USB cable, install drivers if needed. 6. Select Samsung diagnostic port in port settings. 7. Press 'Unlock' button for direct unlock. Operation: Unlock Selected model: SM-A300FU Selected port: COM72 SAMSUNG Mobile USB Serial Port Software version: 29.0 Reading phone info... Reading IMEI... OK IMEI: 35XXXXXXXXXX Unlocking... OK Reseting... OK Unlock done Done with Samsung Tool PRO v.29.0

07-31-2017, 04:40	#18810 (permalink)
wsmobile No Life Poster Join Date: May 2009 Location: pattaya Posts: 1,104 Member: 1043111 Status: Offline Sonork: 1000.2 Thanks Meter: 385	Operation: Unlock Selected model: SM-G930F Software version: 29.0 Searching Samsung modem... detected COM181 Reading phone info... OK Model: SM-G930F AP version: G930FXXS1DQG4 CSC version: G930FDBT1DQD1 CP version: G930FXXU1APJ1 Product code: DBT Phone SN: R58H83QA17H Unique number: AD061603090FE6A9AD Reading IMEI... OK IMEI: 359469079819680 (SIGN: OK) Reading data from phone... OK Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.29.0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Post here successfully unlock or IMEI repair LG	andrew_tm	Z3X-Team Products	1841	07-06-2022 14:14
Post here successfully unlock or IMEI repair Infinity Box	R@ZIB-BD	Infinity-Box	3	07-04-2014 16:37
Post here successfully unlock or IMEI repair LG	R@ZIB-BD	Z3X-Team Products	2	02-01-2011 17:29