Post here successfully job with Z3X-BOX Samsung (2018-2022) - Page 131 - GSM-Forum

mtb116 · 05-11-2022, 06:00

A217F FRP done

Searching Samsung modem... detected COM63
Reading phone info... error (0)
Checking avaiable method... OK
Go to 'Emergency call' and dial *#0*# If the code does not work, then reflash the phone OK
Executing 1st step... OK
Waiting ADB device... OK
Executing 2nd step... OK
Rebooting phone... OK
For complete reset FRP, goto 'Settings - General management - Reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.44.4 [SM-A217F,Reset FRP]

kensopoy · 05-11-2022, 07:50

Operation: Repair
Selected model: SM-G988B
Software version: 44.4

Waiting ADB device... OK
Reading phone info...
Model: SM-G988B
Android version: 12
PDA version: G988BXXSDEVA8
CSC version: G988BOWODEVA8
Phone version: G988BXXSDEVA8
Product code: SM-G988BZADZTO
CSC country code: Brazil
CSC sales code: ZTO
Carrier ID: SER
Phone SN: R5CN30LJTRV
IMEI: 351828114491193
HW version: REV0.5
RF cal date: 20200311
Chip name: EXYNOS990
Modem board: SHANNON5123
Security patch: 2022-02-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT
Checking Super user right... true
Root version: 24.2:MAGISKSU
Checking data... OK
Searching server... OK
Checking server answer... OK
Data preparation... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing 1st step... OK
Executing 2nd step... OK
Searching server... OK
Waiting for server answer... OK
Reparing... OK
Rebooting phone... OK

mtb116 · 05-16-2022, 06:29

G965F FRP done

Searching Samsung modem... detected COM81
Reading phone info...
Model: SM-G965F
AP version: G965FXXS9DTD7
CSC version: G965FOXM9DTD8
CP version: G965FXXS9DTD7
OS version: 10
Product code: VAU
Phone SN: RF8K30W3XQL
IMEI: 3524020xxxxxxxx
Unique number: CE011821328C6407027E
Checking avaiable method... OK
Go to 'Emergency call' and dial *#0*# If the code does not work, then reflash the phone OK
Executing 1st step... OK
Waiting ADB device... OK
Executing 2nd step... OK
Rebooting phone... OK
For complete reset FRP, goto 'Settings - General management - Reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.44.4 [SM-G965F,Reset FRP]

SRTBOX · 05-17-2022, 10:47

Operation: Unlock
Selected model: SM-N986B
Software version: 44.4

Checking Login and Password... OK
Balance: 40 crd.
You have 40 credit(s) left. This operation takes 8 credits. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-N986B
Android version: 11
PDA version: N986BXXU3DUH2
CSC version: N986BOXM3DUH2
Phone version: N985FXXU3DUH2
Product code: SM-N985FZNMAUT
CSC country code: UK & IRE
CSC sales code: BTU
Carrier ID: TCE
Phone SN: R58N81JYCYB
IMEI: 354139180341859
HW version: REV0.6
RF cal date: 20200809
Chip name: EXYNOS990
Modem board: SHANNON5123
Security patch: 2021-08-01
Boot Warranty bit: 1
SIM State: NETWORK_LOCKED,NETWORK_LOCKED
Checking Super user right... true
Root version: 24.3:MAGISKSU
Checking data... OK
Searching server... OK
Checking server answer... OK
Data preparation... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing 1st step... OK
Executing 2nd step... OK
Searching server... OK
Waiting for server answer... OK
Unlocking... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.44.4 [SM-N986B,Unlock] but phone still have lock

Bismillah. · 05-17-2022, 11:15

Operation: Patch Certificate
Selected model: SM-A125F
Software version: 44.4

Waiting ADB device... OK
Reading phone info...
Model: SM-A125F
Android version: 11
PDA version: A125FXXU1BUF9
CSC version: A125FOJM1BUFA
Phone version: A125FXXU1BUF7
Product code: SM-A125FZKGXSG
CSC country code: UAE
CSC sales code: XSG
Carrier ID: XSG
Phone SN: R58XXXXXX
IMEI: 352XXXXXXXXXXXX
HW version: MP0.3B
RF cal date: 20210719
Chip name: MT6765
Modem board: MT6765
Security patch: 2021-05-01
Boot Warranty bit: 0
SIM State: ABSENT,LOADED
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching server... OK
Checking server answer... OK
Patching cert... OK
Rebooting phone... OK

Done with Samsung Tool PRO v.44.4 [SM-A125F,Patch Certificate]

Marcellin6 · 05-17-2022, 20:46

Waiting ADB device... OK
Reading phone info...
Model: SM-G930T
Android version: 8.0.0
PDA version: G930TUVSBCTA2
CSC version: G930TTMBBCTA2
Phone version: G930TUVSBCTA2
Product code: SM-G930TZKATMB
CSC country code: USA
CSC sales code: TMB
Phone SN: R2XXXXXXX
IMEI: 35XXXXXXXXXXX
HW version: REV0.6
RF cal date: 2016.05.12
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2019-12-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM21 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.44.4 [SM-G930T,Unlock]

alexxperto · 05-18-2022, 01:51

Operation: Unlock
Selected model: SM-G920P
Software version: 44.4

Waiting ADB device... OK
Reading phone info...
Model: SM-G920P
Android version: 6.0.1
PDA version: G920PVPU3CPD3
CSC version: G920PSPT3CPD3
Phone version: G920PVPU3CPD3
Product code: Not Active
CSC country code: USA
CSC sales code: XAS
Phone SN: 00000000000
IMEI: 9900069779xxxxx
HW version: G920P.02
RF cal date: 2016.06.23
Chip name: EXYNOS7420
Modem board: MDM9635M
Security patch: 2016-05-01
Boot Warranty bit: 1
Writing AT RIL... OK
Initialization AT RIL... root required
Checking Super user right... true
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.44.4 [SM-G920P,Unlock]

alexxperto · 05-18-2022, 01:52

Operation: Unlock
Selected model: SM-G920P
Software version: 44.4

Waiting ADB device... OK
Reading phone info...
Model: SM-G920P
Android version: 7.0
PDA version: G920PVPS4DRC2
CSC version: G920PSPT4DRC2
Phone version: G920PVPS4DRC2
Product code: Not Active
CSC country code: USA
CSC sales code: SPR
Phone SN: 00000000000
IMEI: 990005811xxxxx
HW version: G920P.02
RF cal date: 2015.07.17
Chip name: EXYNOS7420
Modem board: MDM9635M
Security patch: 2018-03-01
Boot Warranty bit: 1
Writing AT RIL... OK
Initialization AT RIL... root required
Checking Super user right... true
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.44.4 [SM-G920P,Unlock]

qasir_amz · 05-22-2022, 10:54

UNLOCK INSTRUCTIONS:
New Securiry Type:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button and select 'New Unlock' for direct unlock.
6. Press 'Read codes' button and select 'Read codes New' to read security codes.

Old Securiry Type:
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Unlock' button and select 'Unlock' for direct unlock.
5. Press 'Read codes' button and select 'Read codes' to read security codes.

To read security codes via diagnostic port:
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Press 'Read Codes DIAG' button to read security codes.

To read security codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, select 'Read codes ...' algo,
write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

To reset Google account activation or Samsung reactivation lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
4. After phone reboot, go to settings and perform factory reset.

To reset Google account activation lock with UART cable:
1. Phone must be powered off
2. Connect the phone to UART cable.
3. Select correct COM port in port settings.
4. Press 'Reset FRP UFS' and follow the instructions in program.

Operation: Unlock
Selected model: SM-G920F
Selected port: COM3 USB Serial Port
Software version: 44.4

Waiting ADB device... OK
Reading phone info...
Model: SM-G920F
Android version: 7.0
PDA version: G920FXXS6ETI6
CSC version: G920FVIR6ETJ1
Phone version: G920FXXU6ERF6
Product code: SM-G920FZKAVOD
CSC country code: UK
CSC sales code: VIR
Phone SN: RF8H53ACEPM
IMEI: 35502XXXXXXXXXX
HW version: MP 1.00V
RF cal date: 20160625
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2018-06-01
Boot Warranty bit: 1
SIM State: UNKNOWN
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Initialization zTool... OK
Running zTool, please wait... OK
HWID: E8 3B AF F7 E4 07 00 00 00 00 00 00 00 00 00 00
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.44.4 [SM-G920F,Unlock]

alexxperto · 05-23-2022, 04:51

Operation: Unlock
Selected model: SM-G920T
Software version: 44.4

Waiting ADB device... OK
Reading phone info...
Model: SM-G920T
Android version: 7.0
PDA version: G920TUVS6FRC1
CSC version: G920TTMB6FRC1
Phone version: G920TUVS6FRC1
Product code: SM-G920TZKATMB
CSC country code: USA
CSC sales code: TMB
Phone SN: R58G31DXZBT
IMEI: 35774606040xxxx
HW version: REV1.0
RF cal date: 20150318
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2018-03-01
Boot Warranty bit: 1
SIM State: NETWORK_LOCKED
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Initialization zTool... OK
Running zTool, please wait... OK
HWID: 08 E7 34 F6 F5 06 00 00 00 00 00 00 00 00 00 00
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.44.4 [SM-G920T,Unlock]

Gubby_J · 05-23-2022, 09:19

Searching Samsung modem... detected COM39
Reading phone info...
Model: SM-A505FN
AP version: A505FNXXU8CUE4
CSC version: A505FNOXM8CUE4
CP version: A505FXXU8CUE3
OS version: 11
Product code: BGL
Phone SN: R58MB6E3T0B
IMEI: 352698118784128
IMEI2: 352699118784126
Unique number: CE11193B402510971E7E
Checking avaiable method... OK
Go to 'Emergency call' and dial *#0*# If the code does not work, then reflash the phone OK
Executing 1st step... OK
Waiting ADB device... OK
Executing 2nd step... OK
Rebooting phone... OK
For complete reset FRP, goto 'Settings - General management - Reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.44.4 [SM-A505F,Reset FRP]

mtb116 · 05-24-2022, 08:10

S22 Ultra FRP done

Operation: Reset FRP
Selected model: SM-S908B
Software version: 44.4

Searching Samsung modem... detected COM22
Reading phone info...
Model: SM-S908E
AP version: S908EXXU1AVC9
CSC version: S908EOXM1AVC9
CP version: S908EXXU1AVC9
OS version: 12
Product code: OPS
Phone SN: R5CT40ZFRKK
IMEI: 354617xxxxxxxxx
IMEI2: 356219xxxxxxxxx
Unique number: CE022262348XXXXXXXXX
Checking avaiable method... OK
Go to 'Emergency call' and dial *#0*# If the code does not work, then reflash the phone OK
Executing 1st step... OK
Waiting ADB device... OK
Executing 2nd step... OK
Rebooting phone... OK
For complete reset FRP, goto 'Settings - General management - Reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.44.4 [SM-S908B,Reset FRP]

sasfido · 05-24-2022, 12:00

samsung note 10+ g975f frp bypass done.

UNLOCK INSTRUCTIONS:
To read security codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button, select 'Unlock via server ...' algo,
write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Reset FRP
Selected model: SM-N975F
Software version: 44.4

Searching Samsung modem... detected COM182
Reading phone info...
Model:
AP version:
CSC version:
CP version:
Product code:
Phone SN:
IMEI: 0
Unique number:
Checking avaiable method... OK
Go to 'Emergency call' and dial *#0*# If the code does not work, then reflash the phone OK
Executing 1st step... OK
Waiting ADB device... OK
Executing 2nd step... OK
Rebooting phone... OK
For complete reset FRP, goto 'Settings - General management - Reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.44.4 [SM-N975F,Reset FRP]

sasfido · 05-24-2022, 12:00

samsung note 10+ g975f frp bypass done.

UNLOCK INSTRUCTIONS:
To read security codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button, select 'Unlock via server ...' algo,
write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Reset FRP
Selected model: SM-N975F
Software version: 44.4

Searching Samsung modem... detected COM182
Reading phone info...
Model:
AP version:
CSC version:
CP version:
Product code:
Phone SN:
IMEI: 0
Unique number:
Checking avaiable method... OK
Go to 'Emergency call' and dial *#0*# If the code does not work, then reflash the phone OK
Executing 1st step... OK
Waiting ADB device... OK
Executing 2nd step... OK
Rebooting phone... OK
For complete reset FRP, goto 'Settings - General management - Reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.44.4 [SM-N975F,Reset FRP]

Bismillah. · 05-25-2022, 08:03

REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery).

Operation: Repair
Selected model: SM-G532G
Software version: 44.4

Waiting ADB device... OK
Reading phone info...
Model: SM-G532G
Android version: 6.0.1
PDA version: G532GDXU1ASA1
CSC version: G532GZZT1ASA1
Phone version: G532GDXU1ASA1
Product code: SM-G532GZDDBRI
CSC country code: Taiwan
CSC sales code: BRI
Phone SN: R58XXXXXXXX
IMEI: 353298080609087
HW version: MP 0.300
RF cal date: 20161102
Chip name: MT6737T
Modem board: MT6737T
Security patch: 2018-08-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT
Searching server... OK
Checking server answer... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Preparation of data... OK
Executing... OK
Writing security... OK
Rebooting phone... OK

Done with Samsung Tool PRO v.44.4 [SM-G532G,Repair]

05-17-2022, 11:15	#1955 (permalink)
Bismillah. Insane Poster Join Date: May 2021 Location: Pakistan. Rajanpur Posts: 86 Member: 2989274 Status: Offline Thanks Meter: 20	A125f u1 patch done Operation: Patch Certificate Selected model: SM-A125F Software version: 44.4 Waiting ADB device... OK Reading phone info... Model: SM-A125F Android version: 11 PDA version: A125FXXU1BUF9 CSC version: A125FOJM1BUFA Phone version: A125FXXU1BUF7 Product code: SM-A125FZKGXSG CSC country code: UAE CSC sales code: XSG Carrier ID: XSG Phone SN: R58XXXXXX IMEI: 352XXXXXXXXXXXX HW version: MP0.3B RF cal date: 20210719 Chip name: MT6765 Modem board: MT6765 Security patch: 2021-05-01 Boot Warranty bit: 0 SIM State: ABSENT,LOADED Initialization zTool Loader... OK Running zTool, please wait... OK Loading... OK Initialization zTool... OK Running zTool, please wait... OK Executing... OK Searching server... OK Checking server answer... OK Patching cert... OK Rebooting phone... OK Done with Samsung Tool PRO v.44.4 [SM-A125F,Patch Certificate]

05-17-2022, 20:46	#1956 (permalink)
Marcellin6 Insane Poster Join Date: Apr 2019 Location: Toamasina Madagascar Posts: 88 Member: 2903727 Status: Offline Thanks Meter: 22	SM-G930T U11 Unlock Done Waiting ADB device... OK Reading phone info... Model: SM-G930T Android version: 8.0.0 PDA version: G930TUVSBCTA2 CSC version: G930TTMBBCTA2 Phone version: G930TUVSBCTA2 Product code: SM-G930TZKATMB CSC country code: USA CSC sales code: TMB Phone SN: R2XXXXXXX IMEI: 35XXXXXXXXXXX HW version: REV0.6 RF cal date: 2016.05.12 Chip name: MSM8996 Modem board: MSM8996 Security patch: 2019-12-01 Boot Warranty bit: 0 SIM State: NETWORK_LOCKED Rebooting phone... OK Waiting ADB device... OK Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... OK Rebooting to upload... OK Searching Ramdump interface... COM21 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.44.4 [SM-G930T,Unlock]

05-18-2022, 01:51	#1957 (permalink)
alexxperto Junior Member Join Date: Aug 2021 Location: New York, NJ, Kearny Age: 26 Posts: 36 Member: 2994877 Status: Offline Thanks Meter: 6	Operation: Unlock Selected model: SM-G920P Software version: 44.4 Waiting ADB device... OK Reading phone info... Model: SM-G920P Android version: 6.0.1 PDA version: G920PVPU3CPD3 CSC version: G920PSPT3CPD3 Phone version: G920PVPU3CPD3 Product code: Not Active CSC country code: USA CSC sales code: XAS Phone SN: 00000000000 IMEI: 9900069779xxxxx HW version: G920P.02 RF cal date: 2016.06.23 Chip name: EXYNOS7420 Modem board: MDM9635M Security patch: 2016-05-01 Boot Warranty bit: 1 Writing AT RIL... OK Initialization AT RIL... root required Checking Super user right... true Initialization AT RIL... OK Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.44.4 [SM-G920P,Unlock] Last edited by alexxperto; 05-18-2022 at 01:53. Reason: SM-G920P Unlock done V 6.0

05-18-2022, 01:52	#1958 (permalink)
alexxperto Junior Member Join Date: Aug 2021 Location: New York, NJ, Kearny Age: 26 Posts: 36 Member: 2994877 Status: Offline Thanks Meter: 6	Unlock done SM-G920P V 7.0 Operation: Unlock Selected model: SM-G920P Software version: 44.4 Waiting ADB device... OK Reading phone info... Model: SM-G920P Android version: 7.0 PDA version: G920PVPS4DRC2 CSC version: G920PSPT4DRC2 Phone version: G920PVPS4DRC2 Product code: Not Active CSC country code: USA CSC sales code: SPR Phone SN: 00000000000 IMEI: 990005811xxxxx HW version: G920P.02 RF cal date: 2015.07.17 Chip name: EXYNOS7420 Modem board: MDM9635M Security patch: 2018-03-01 Boot Warranty bit: 1 Writing AT RIL... OK Initialization AT RIL... root required Checking Super user right... true Initialization AT RIL... OK Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.44.4 [SM-G920P,Unlock]

05-22-2022, 10:54	#1959 (permalink)
qasir_amz No Life Poster Join Date: Dec 2009 Location: PAKISTAN Posts: 2,107 Member: 1185918 Status: Offline Sonork: 100.1617322 Thanks Meter: 428	G920F U6 Repair Damage securiety and Network unlock UNLOCK INSTRUCTIONS: New Securiry Type: Phone must be rooted! If the software can't root the phone automatically, then you must root your device manually. 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Unlock' button and select 'New Unlock' for direct unlock. 6. Press 'Read codes' button and select 'Read codes New' to read security codes. Old Securiry Type: 1. Power on the phone. 2. Connect the phone to PC with USB cable. 3. Check Samsung modem in device manager, install drivers if needed. 4. Press 'Unlock' button and select 'Unlock' for direct unlock. 5. Press 'Read codes' button and select 'Read codes' to read security codes. To read security codes via diagnostic port: 1. Power on the phone. 2. Type *#0808# and select 'DM+MODEM+ADB'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Press 'Read Codes DIAG' button to read security codes. To read security codes using sever: 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Read Codes via server' button, select 'Read codes ...' algo, write your login and password in window if it will appear. (Login and password will be saved as default after first input and can be changed in settings.) To reset Google account activation or Samsung reactivation lock: 1. Power on the phone in download mode (turn off phone, press vol.down + home + power). 2. Connect the phone to PC with USB cable, install drivers if needed. 3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock. 4. After phone reboot, go to settings and perform factory reset. To reset Google account activation lock with UART cable: 1. Phone must be powered off 2. Connect the phone to UART cable. 3. Select correct COM port in port settings. 4. Press 'Reset FRP UFS' and follow the instructions in program. Operation: Unlock Selected model: SM-G920F Selected port: COM3 USB Serial Port Software version: 44.4 Waiting ADB device... OK Reading phone info... Model: SM-G920F Android version: 7.0 PDA version: G920FXXS6ETI6 CSC version: G920FVIR6ETJ1 Phone version: G920FXXU6ERF6 Product code: SM-G920FZKAVOD CSC country code: UK CSC sales code: VIR Phone SN: RF8H53ACEPM IMEI: 35502XXXXXXXXXX HW version: MP 1.00V RF cal date: 20160625 Chip name: EXYNOS7420 Modem board: SHANNON333 Security patch: 2018-06-01 Boot Warranty bit: 1 SIM State: UNKNOWN Checking Super user right... true Reading NV data... OK Checking NV data... OK Initialization zTool... OK Running zTool, please wait... OK HWID: E8 3B AF F7 E4 07 00 00 00 00 00 00 00 00 00 00 Calculating... OK Unlocking... OK Writing NV data... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.44.4 [SM-G920F,Unlock]

05-11-2022, 06:00	#1951 (permalink)
mtb116 No Life Poster Join Date: Sep 2005 Location: Australia Posts: 1,019 Member: 177568 Status: Offline Thanks Meter: 146	A217F FRP done Searching Samsung modem... detected COM63 Reading phone info... error (0) Checking avaiable method... OK Go to 'Emergency call' and dial #0# If the code does not work, then reflash the phone OK Executing 1st step... OK Waiting ADB device... OK Executing 2nd step... OK Rebooting phone... OK For complete reset FRP, goto 'Settings - General management - Reset' and make 'Factory data reset' Done with Samsung Tool PRO v.44.4 [SM-A217F,Reset FRP]

05-11-2022, 07:50	#1952 (permalink)
kensopoy Junior Member Join Date: Jul 2020 Location: ataşehir Age: 37 Posts: 24 Member: 2961916 Status: Offline Thanks Meter: 5	Operation: Repair Selected model: SM-G988B Software version: 44.4 Waiting ADB device... OK Reading phone info... Model: SM-G988B Android version: 12 PDA version: G988BXXSDEVA8 CSC version: G988BOWODEVA8 Phone version: G988BXXSDEVA8 Product code: SM-G988BZADZTO CSC country code: Brazil CSC sales code: ZTO Carrier ID: SER Phone SN: R5CN30LJTRV IMEI: 351828114491193 HW version: REV0.5 RF cal date: 20200311 Chip name: EXYNOS990 Modem board: SHANNON5123 Security patch: 2022-02-01 Boot Warranty bit: 1 SIM State: ABSENT,ABSENT Checking Super user right... true Root version: 24.2:MAGISKSU Checking data... OK Searching server... OK Checking server answer... OK Data preparation... OK Initialization zTool... OK Running zTool, please wait... OK Executing 1st step... OK Executing 2nd step... OK Searching server... OK Waiting for server answer... OK Reparing... OK Rebooting phone... OK

05-16-2022, 06:29	#1953 (permalink)
mtb116 No Life Poster Join Date: Sep 2005 Location: Australia Posts: 1,019 Member: 177568 Status: Offline Thanks Meter: 146	G965F FRP done Searching Samsung modem... detected COM81 Reading phone info... Model: SM-G965F AP version: G965FXXS9DTD7 CSC version: G965FOXM9DTD8 CP version: G965FXXS9DTD7 OS version: 10 Product code: VAU Phone SN: RF8K30W3XQL IMEI: 3524020xxxxxxxx Unique number: CE011821328C6407027E Checking avaiable method... OK Go to 'Emergency call' and dial #0# If the code does not work, then reflash the phone OK Executing 1st step... OK Waiting ADB device... OK Executing 2nd step... OK Rebooting phone... OK For complete reset FRP, goto 'Settings - General management - Reset' and make 'Factory data reset' Done with Samsung Tool PRO v.44.4 [SM-G965F,Reset FRP]

05-17-2022, 10:47	#1954 (permalink)
SRTBOX Junior Member Join Date: Nov 2014 Posts: 27 Member: 2293383 Status: Offline Thanks Meter: 11	Operation: Unlock Selected model: SM-N986B Software version: 44.4 Checking Login and Password... OK Balance: 40 crd. You have 40 credit(s) left. This operation takes 8 credits. Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-N986B Android version: 11 PDA version: N986BXXU3DUH2 CSC version: N986BOXM3DUH2 Phone version: N985FXXU3DUH2 Product code: SM-N985FZNMAUT CSC country code: UK & IRE CSC sales code: BTU Carrier ID: TCE Phone SN: R58N81JYCYB IMEI: 354139180341859 HW version: REV0.6 RF cal date: 20200809 Chip name: EXYNOS990 Modem board: SHANNON5123 Security patch: 2021-08-01 Boot Warranty bit: 1 SIM State: NETWORK_LOCKED,NETWORK_LOCKED Checking Super user right... true Root version: 24.3:MAGISKSU Checking data... OK Searching server... OK Checking server answer... OK Data preparation... OK Initialization zTool... OK Running zTool, please wait... OK Executing 1st step... OK Executing 2nd step... OK Searching server... OK Waiting for server answer... OK Unlocking... OK Rebooting phone... OK Done with Samsung Tool PRO v.44.4 [SM-N986B,Unlock] but phone still have lock

05-23-2022, 04:51	#1960 (permalink)
alexxperto Junior Member Join Date: Aug 2021 Location: New York, NJ, Kearny Age: 26 Posts: 36 Member: 2994877 Status: Offline Thanks Meter: 6	Samsung SM-G920T Network Unlock, need too be rooted manually Operation: Unlock Selected model: SM-G920T Software version: 44.4 Waiting ADB device... OK Reading phone info... Model: SM-G920T Android version: 7.0 PDA version: G920TUVS6FRC1 CSC version: G920TTMB6FRC1 Phone version: G920TUVS6FRC1 Product code: SM-G920TZKATMB CSC country code: USA CSC sales code: TMB Phone SN: R58G31DXZBT IMEI: 35774606040xxxx HW version: REV1.0 RF cal date: 20150318 Chip name: EXYNOS7420 Modem board: SHANNON333 Security patch: 2018-03-01 Boot Warranty bit: 1 SIM State: NETWORK_LOCKED Checking Super user right... true Reading NV data... OK Checking NV data... OK Initialization zTool... OK Running zTool, please wait... OK HWID: 08 E7 34 F6 F5 06 00 00 00 00 00 00 00 00 00 00 Calculating... OK Unlocking... OK Writing NV data... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.44.4 [SM-G920T,Unlock]

05-23-2022, 09:19	#1961 (permalink)
Gubby_J Freak Poster Join Date: Mar 2005 Location: Bulgaria,Veliko Tarnovo Posts: 430 Member: 131788 Status: Offline Thanks Meter: 69	Samsung sm-a505fn frp done ! Searching Samsung modem... detected COM39 Reading phone info... Model: SM-A505FN AP version: A505FNXXU8CUE4 CSC version: A505FNOXM8CUE4 CP version: A505FXXU8CUE3 OS version: 11 Product code: BGL Phone SN: R58MB6E3T0B IMEI: 352698118784128 IMEI2: 352699118784126 Unique number: CE11193B402510971E7E Checking avaiable method... OK Go to 'Emergency call' and dial #0# If the code does not work, then reflash the phone OK Executing 1st step... OK Waiting ADB device... OK Executing 2nd step... OK Rebooting phone... OK For complete reset FRP, goto 'Settings - General management - Reset' and make 'Factory data reset' Done with Samsung Tool PRO v.44.4 [SM-A505F,Reset FRP]

05-24-2022, 08:10	#1962 (permalink)
mtb116 No Life Poster Join Date: Sep 2005 Location: Australia Posts: 1,019 Member: 177568 Status: Offline Thanks Meter: 146	S22 Ultra FRP done Operation: Reset FRP Selected model: SM-S908B Software version: 44.4 Searching Samsung modem... detected COM22 Reading phone info... Model: SM-S908E AP version: S908EXXU1AVC9 CSC version: S908EOXM1AVC9 CP version: S908EXXU1AVC9 OS version: 12 Product code: OPS Phone SN: R5CT40ZFRKK IMEI: 354617xxxxxxxxx IMEI2: 356219xxxxxxxxx Unique number: CE022262348XXXXXXXXX Checking avaiable method... OK Go to 'Emergency call' and dial #0# If the code does not work, then reflash the phone OK Executing 1st step... OK Waiting ADB device... OK Executing 2nd step... OK Rebooting phone... OK For complete reset FRP, goto 'Settings - General management - Reset' and make 'Factory data reset' Done with Samsung Tool PRO v.44.4 [SM-S908B,Reset FRP]

05-24-2022, 12:00	#1963 (permalink)
sasfido Freak Poster Join Date: Apr 2007 Location: ZANZIBAR Posts: 461 Member: 496694 Status: Offline Thanks Meter: 95	samsung note 10+ g975f frp bypass done. UNLOCK INSTRUCTIONS: To read security codes using sever: 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Unlock' button, select 'Unlock via server ...' algo, write your login and password in window if it will appear. (Login and password will be saved as default after first input and can be changed in settings.) Operation: Reset FRP Selected model: SM-N975F Software version: 44.4 Searching Samsung modem... detected COM182 Reading phone info... Model: AP version: CSC version: CP version: Product code: Phone SN: IMEI: 0 Unique number: Checking avaiable method... OK Go to 'Emergency call' and dial #0# If the code does not work, then reflash the phone OK Executing 1st step... OK Waiting ADB device... OK Executing 2nd step... OK Rebooting phone... OK For complete reset FRP, goto 'Settings - General management - Reset' and make 'Factory data reset' Done with Samsung Tool PRO v.44.4 [SM-N975F,Reset FRP]

05-24-2022, 12:00	#1964 (permalink)
sasfido Freak Poster Join Date: Apr 2007 Location: ZANZIBAR Posts: 461 Member: 496694 Status: Offline Thanks Meter: 95	samsung note 10+ g975f frp bypass done. UNLOCK INSTRUCTIONS: To read security codes using sever: 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Unlock' button, select 'Unlock via server ...' algo, write your login and password in window if it will appear. (Login and password will be saved as default after first input and can be changed in settings.) Operation: Reset FRP Selected model: SM-N975F Software version: 44.4 Searching Samsung modem... detected COM182 Reading phone info... Model: AP version: CSC version: CP version: Product code: Phone SN: IMEI: 0 Unique number: Checking avaiable method... OK Go to 'Emergency call' and dial #0# If the code does not work, then reflash the phone OK Executing 1st step... OK Waiting ADB device... OK Executing 2nd step... OK Rebooting phone... OK For complete reset FRP, goto 'Settings - General management - Reset' and make 'Factory data reset' Done with Samsung Tool PRO v.44.4 [SM-N975F,Reset FRP]

05-25-2022, 08:03	#1965 (permalink)
Bismillah. Insane Poster Join Date: May 2021 Location: Pakistan. Rajanpur Posts: 86 Member: 2989274 Status: Offline Thanks Meter: 20	G532g done REPAIR INSTRUCTIONS: 1. Power on the phone. 2. Enable 'USB debugging' in 'Settings'-'Developer options', tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Reboot to...' button and select mode to reboot (download or recovery). Operation: Repair Selected model: SM-G532G Software version: 44.4 Waiting ADB device... OK Reading phone info... Model: SM-G532G Android version: 6.0.1 PDA version: G532GDXU1ASA1 CSC version: G532GZZT1ASA1 Phone version: G532GDXU1ASA1 Product code: SM-G532GZDDBRI CSC country code: Taiwan CSC sales code: BRI Phone SN: R58XXXXXXXX IMEI: 353298080609087 HW version: MP 0.300 RF cal date: 20161102 Chip name: MT6737T Modem board: MT6737T Security patch: 2018-08-01 Boot Warranty bit: 1 SIM State: ABSENT,ABSENT Searching server... OK Checking server answer... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... OK Preparation of data... OK Executing... OK Writing security... OK Rebooting phone... OK Done with Samsung Tool PRO v.44.4 [SM-G532G,Repair]