Samsung B5722 showing as BD0204EE

[Vijay dts]

I flashed both master and slave successfully, still its blinking as BD0204EE

Please someone help me

[Vijay dts]

Hello sir, can anyone help to solve this problem

[.::ASG GSM::.]

erase the phone.
then flash.

[informatique]

Salam,

Please write Epprom Files.
try first matser Eeprom, if not workinf try slave eeprom

u may recieve Phine dead, afetr eeeprom, jusr reflach Phone with B5722 downlowed and Phone Will OK 100% tsted

[Vijay dts]

Ok bro, i will try and reply

[Vijay dts]

Thanks bro, your method works

[informatique]

You are almost Welcome

happy that my post helps You

[allumts]

Originally Posted by informatique

Salam,

Please write Epprom Files.
try first matser Eeprom, if not workinf try slave eeprom

u may recieve Phine dead, afetr eeeprom, jusr reflach Phone with B5722 downlowed and Phone Will OK 100% tsted

Please have the same problem, but how first thingh, when i connect my phone to pc, install Modem Port and Usb Port, for the Com port nothingh to do, the process stop becouse the phone Power On.

Have one fw whith Master and Slave files, but not have the CSC file, i want flash whith "OneNAND Downloader Version 0.4" but requiere the CSC file and in the fw "B5722XXJB1" not have.
It's right this procedure?, for i do your procedure which fw i've need and which Flasher?, and for the Problem of "Hold "*" Key when connect the phone power off, how do if the display is hung whith this red write?,
thank in advance for the help ,
Br
Allumts

[aZimBahar]

Here Tested Solution .

1St Write EEPROM Master And Slave Both File .
After If After Write Not Done Or Dead Phone Try 2nd Step

2ND Flash Your phone With Master And Slave Both File Also Master CSC File.
Here Tested File B5722VJJE1.zip Can Download From Z3X Support .






Note ;
Both Step For Red Blink On Display (BD0204EE Or 1800007 Or ECT) Error
2nd Step If Phone After Flash Restart .

Br,
One-Man
..::azimbahar::..

[kottidi]

thank you very much... it worked for me

kottidi

[rahul baba]

thank you very much sir One-Man.........its work

[allumts]

Originally Posted by ..::One-Man::..

Here Tested Solution .

1St Write EEPROM Master And Slave Both File .
After If After Write Not Done Or Dead Phone Try 2nd Step

2ND Flash Your phone With Master And Slave Both File Also Master CSC File.
Here Tested File B5722VJJE1.zip Can Download From Z3X Support .






Note ;
Both Step For Red Blink On Display (BD0204EE Or 1800007 Or ECT) Error
2nd Step If Phone After Flash Restart .

Br,
One-Man
..::azimbahar::..

Hello, have done many device whith this problem, @..::One-Man::.. , has Forgot the most Important first Step:

"ERASE FLASH",
not overwrite the 2 Files Bin/Slave if FIRST Not ERASE FLASH !!!

SO:
1) Erase Flash/Eeprom
2) Write Bin/slave file (E2P)
3) Repair Imei (Erase Flash cancel Imei),
Only these steps can do whith Z3X for to have FULL SUCCESS,

P.d. if not have Goos E2P search in this Forum or Google for Eeproom,
Regards
Allumts

[LIONSON]

Thanx One Man it work

[alirazajutt]

flashed both master and slave successfully butt same problam

[imraan ali]

100 percent tested soluation is hare
i test it by myseif
frist erase eeprom as 5722-s
and then write firmware as 5722-m as master