samsung e2220 MSL Deactivate - False solution. - GSM-Forum

krish neupane · 12-12-2011, 05:01

Those who have problem to unlock e2220 here is the solution.

1.In z3x box select model e2222.

2.Go to setting model tab and tick flash mode and use usb.

3. Remove batt from phone and hold 2+4+5+8 keys at same time and install c3303k high speed dfu driver.

4.Press direct unlock wait near 1min done.

Thanks z3x team here is the log.

Selected model: E2222
Selected com port: COM7
Selected speed port: 921600
Press "volume down" + "lock" and connect USB cable to phone
Connect to control pipe... OK
Processor ID -> 0A34
Sending loader... OK
Connect to control pipe... OK
Connect to write pipe... OK
Connect to read pipe... OK
Damping... OK
Erasing... OK
Sending... OK
Unlock - ok
If lock - not deactivate: Please make full reset *2767*3855# + input code #7465625*638*00000000#
Elapsed time: 125 second, sw ver: 3.5.0029

maikash2747 · 12-12-2011, 13:38

Did not work for me.

This is what worked :

Select E2222

In settings select flash mode, remove battery, press direct unlock, hold 4+7 and insert usb cable (without battery). Wait for "Unlock - ok"

Done.

akhil_bbsr · 12-12-2011, 13:43

When CONNECTING PHONE, Press Q + A keys

krish neupane · 12-12-2011, 16:33

check in device manager if high speed dfu driver install or yellow marked if yellow mark then remove and again set up driver.

nongmobile · 12-12-2011, 16:52

Remove battery Press 4+5 same time and connect usb

thiago cell · 12-16-2011, 12:32

Quote:

Originally Posted by nongmobile

Remove battery Press 4+5 same time and connect usb

repair imei E2220 fail to e2222.
Solution? please blank

ruyramonn · 12-28-2011, 20:02

i have same problem, repair imei e2220

12-12-2011, 05:01	#1 (permalink)
krish neupane Freak Poster Join Date: Dec 2006 Posts: 473 Member: 412812 Status: Offline Thanks Meter: 97	samsung e2220 MSL Deactivate - False solution. Those who have problem to unlock e2220 here is the solution. 1.In z3x box select model e2222. 2.Go to setting model tab and tick flash mode and use usb. 3. Remove batt from phone and hold 2+4+5+8 keys at same time and install c3303k high speed dfu driver. 4.Press direct unlock wait near 1min done. Thanks z3x team here is the log. Selected model: E2222 Selected com port: COM7 Selected speed port: 921600 Press "volume down" + "lock" and connect USB cable to phone Connect to control pipe... OK Processor ID -> 0A34 Sending loader... OK Connect to control pipe... OK Connect to write pipe... OK Connect to read pipe... OK Damping... OK Erasing... OK Sending... OK Unlock - ok If lock - not deactivate: Please make full reset 27673855# + input code #746562563800000000# Elapsed time: 125 second, sw ver: 3.5.0029

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anybody know solution	Robi	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	12-10-2014 12:35
Solution for GSM phones!?!?!?!?	todosije	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	12-16-2010 05:52
Pic Solution	jan	Nokia Hardware & Hardware Repair	8	10-11-2010 10:56
5110 version 5.24 solution	lampin	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	11-14-1999 07:00
!!!!!!TO ALL NOKIA 51XX/61XX SP LOCKS 1,2,3,4 SOLUTION latest news!!!!!	spterminator	Main Sales Section	2	08-13-1999 05:55

12-12-2011, 13:38	#2 (permalink)
maikash2747 Freak Poster Join Date: Dec 2007 Location: liverpool Posts: 117 Member: 657023 Status: Offline Thanks Meter: 24	Did not work for me. This is what worked : Select E2222 In settings select flash mode, remove battery, press direct unlock, hold 4+7 and insert usb cable (without battery). Wait for "Unlock - ok" Done.

12-12-2011, 13:43	#3 (permalink)
akhil_bbsr No Life Poster Join Date: May 2006 Location: MOBILE SOFTZONE BHUBANESWAR IN Posts: 3,509 Member: 271478 Status: Offline Sonork: 1590868 Thanks Meter: 1,070	When CONNECTING PHONE, Press Q + A keys

12-12-2011, 16:33	#4 (permalink)
krish neupane Freak Poster Join Date: Dec 2006 Posts: 473 Member: 412812 Status: Offline Thanks Meter: 97	check in device manager if high speed dfu driver install or yellow marked if yellow mark then remove and again set up driver.

12-12-2011, 16:52	#5 (permalink)
nongmobile Product Supporter Join Date: Mar 2008 Location: Thailand Age: 46 Posts: 920 Member: 716581 Status: Offline Thanks Meter: 767	Remove battery Press 4+5 same time and connect usb

12-28-2011, 20:02	#7 (permalink)
ruyramonn Freak Poster Join Date: Aug 2006 Location: Brazil - Piauí - Parnaíba Age: 38 Posts: 140 Member: 324897 Status: Offline Thanks Meter: 10	i have same problem, repair imei e2220