SM-A705FN u5 not unlocking [Solved] - GSM-Forum

Pashik91 · 10-21-2020, 12:17

Checking Login and Password... OK
Ballance: 32 crd.
You have 32 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A705FN
Android version: 10
PDA version: A705FNXXU5BTH4
CSC version: A705FN3IE5BTH4
Phone version: A705FNXXU5BTH4
Product code: SM-A705FZKU3IE
CSC country code: Ireland
CSC sales code: 3IE
Phone SN: R58M81SBW6N
IMEI: 359***********
HW version: MP 0.4A0
RF cal date: 2019.08.07
Chip name: SM6150
Modem board: SM6150
Security patch: 2020-09-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED,ABSENT
Searching Samsung diag port... detected COM247
Reading phone info... OK
Searching Samsung modem... detected COM246
Checking SIM status... error
Please check Samsung USB drivers.
Disable screenlock(PIN, password, fingerprint and etc...).
Disable SIM PIN/PUK code.

Done with Samsung Tool PRO v.41.2

Pashik91 · 10-21-2020, 12:42

Without SIM Card
Reading phone info...
Model: SM-A705FN
Android version: 10
PDA version: A705FNXXU5BTH4
CSC version: A705FN3IE5BTH4
Phone version: A705FNXXU5BTH4
Product code: SM-A705FZKU3IE
CSC country code: Ireland
CSC sales code: 3IE
Phone SN: R58M81SBW6N
IMEI: 3593*******
HW version: MP 0.4A0
RF cal date: 2019.08.07
Chip name: SM6150
Modem board: SM6150
Security patch: 2020-09-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Searching Samsung diag port... detected COM247
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM103 detected
Reading data from phone... OK
Calculating...
Searching server... OK
Waiting for server answer... error (1)
Server error: Could not decrypt security data
Done with Samsung Tool PRO v.41.3

Z3X · 10-21-2020, 12:57

Hello! Install this firmware and repeat.
https://samfrew.com/ru/download/Gala...705FNOXM5ATA1/

Pashik91 · 10-21-2020, 13:54

You have 32 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A705FN
Android version: 9
PDA version: A705FNXXU5ASL4
CSC version: A705FNOXM5ASL4
Phone version: A705FNXXU5ASL4
Product code: SM-A705FZKUSEK
CSC country code: Ukraine
CSC sales code: SEK
Phone SN: R58M81SBW6N
IMEI: 359320100966430
HW version: MP 0.4A0
RF cal date: 2019.08.07
Chip name: SM6150
Modem board: SM6150
Security patch: 2020-01-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED,ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM247
Reading phone info... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Executing... OK
Searching Ramdump interface... COM103 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 57536025
NET lock: 40684852
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool PRO v.41.3
All is ok
Firmware link on gdrive https://drive.google.com/u/0/uc?id=1...xport=download

THX!

sirham · 08-06-2021, 09:59

Please help
Checking Login and Password... OK
Balance: 33 crd.
You have 33 credit(s) left. This operation takes 5 credits. Continue? Yes
Waiting for device to become ready... OK
Reading phone info...
Model: SM-A705FN
Android version: 9
PDA version: A705FNXXU5ASL4
CSC version: A705FNOXM5ASL4
Phone version: A705FNXXU5ASL4
Product code: SM-A705FZKUXEU
CSC country code: UK & IRE
CSC sales code: XEU
Carrier ID: EVR
Phone SN: R58M62AN2QN
IMEI: 357472107837338
HW version: MP 0.4A0
RF cal date: 2019.06.11
Chip name: SM6150
Modem board: SM6150
Security patch: 2020-01-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Searching Samsung diag port... detected COM222
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM18 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... error (1)
Server error: A new security v2 has been detected. If you have downgraded the firmware, update it and use the new software 42.11 or higher.

Done with Samsung Tool PRO v.43.7

Z3X · 08-06-2021, 10:43

Hello. Flash this firmware and repeat operation.
https://samfrew.com/ru/download/Gala...705FNOXM5DUC6/

sirham · 08-06-2021, 12:20

Please this was Original firmware
Model SM-A705FN
Model name Galaxy A70
Country

United Kingdom (EE) (EVR)
Version Android 11
Changelist 21681649
Build date Fri, 07 May 2021 08:05:14 +0000
Security Patch Level 2021-05-01
Product code EVR
PDA A705FNXXU5DUE2
CSC A705FNOBE5DUE2

sirham · 08-07-2021, 05:50

Sir still error after phone update
Checking Login and Password... OK
Balance: 33 crd.
You have 33 credit(s) left. This operation takes 5 credits. Continue? Yes
Waiting for device to become ready... OK
Reading phone info...
Model: SM-A705FN
Android version: 11
PDA version: A705FNXXU5DUC6
CSC version: A705FNOXM5DUC6
Phone version: A705FNXXU5DUC1
Product code: SM-A705FZKUSEK
CSC country code: Ukraine
CSC sales code: SEK
Carrier ID: EVR
Phone SN: R58M62AN2QN
IMEI: 357472107837338
HW version: MP 0.4A0
RF cal date: 2019.06.11
Chip name: SM6150
Modem board: SM6150
Security patch: 2021-03-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Checking saved data... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM222
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM18 detected
Reading data from phone... OK
Searching data... [ ok ] [ ok ] [ no ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM222
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM18 detected
Reading data from phone... OK
Searching data... [ ok ] [ ok ] [ no ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM222
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM18 detected
Reading data from phone... OK
Searching data... [ ok ] [ ok ] [ no ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM222
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM18 detected
Reading data from phone... OK
Searching data... [ ok ] [ ok ] [ no ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... error

Done with Samsung Tool PRO v.43.7

Z3X · 08-07-2021, 08:25

Quote:

Originally Posted by sirham

Sir still error after phone update
Checking Login and Password... OK
Balance: 33 crd.
You have 33 credit(s) left. This operation takes 5 credits. Continue? Yes
Waiting for device to become ready... OK
Reading phone info...
Model: SM-A705FN
Android version: 11
PDA version: A705FNXXU5DUC6
CSC version: A705FNOXM5DUC6
Phone version: A705FNXXU5DUC1
Product code: SM-A705FZKUSEK
CSC country code: Ukraine
CSC sales code: SEK
Carrier ID: EVR
Phone SN: R58M62AN2QN
IMEI: 357472107837338
HW version: MP 0.4A0
RF cal date: 2019.06.11
Chip name: SM6150
Modem board: SM6150
Security patch: 2021-03-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Checking saved data... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM222
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM18 detected
Reading data from phone... OK
Searching data... [ ok ] [ ok ] [ no ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM222
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM18 detected
Reading data from phone... OK
Searching data... [ ok ] [ ok ] [ no ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM222
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM18 detected
Reading data from phone... OK
Searching data... [ ok ] [ ok ] [ no ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM222
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM18 detected
Reading data from phone... OK
Searching data... [ ok ] [ ok ] [ no ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... error

Done with Samsung Tool PRO v.43.7

Just try more times. Also you can try faster pc.

sirham · 08-07-2021, 13:40

I have tried on several times and different PC but still no unlocking
On Dell E6430 Core i5 8gb ram but error (searching data ok ok no)

Z3X · 08-07-2021, 15:19

Quote:

Originally Posted by sirham

I have tried on several times and different PC but still no unlocking
On Dell E6430 Core i5 8gb ram but error (searching data ok ok no)

Sometimes it takes time to catch needed data. Try more times.

sirham · 08-09-2021, 11:09

I have tried for 3days now but same error
I have flashed original updated firmware but same error
Please fix it for us

Checking Login and Password... OK
Balance: 33 crd.
You have 33 credit(s) left. This operation takes 5 credits. Continue? Yes
Waiting for device to become ready... OK
Reading phone info...
Model: SM-A705FN
Android version: 11
PDA version: A705FNXXU5DUE2
CSC version: A705FNOBE5DUE2
Phone version: A705FNXXU5DUD4
Product code: SM-A705FZKUEVR
CSC country code: UK
CSC sales code: EVR
Carrier ID: EVR
Phone SN: R58M62AN2QN
IMEI: 357472107837338
HW version: MP 0.4A0
RF cal date: 2019.06.11
Chip name: SM6150
Modem board: SM6150
Security patch: 2021-05-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Checking saved data... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM222
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM18 detected
Reading data from phone... OK
Searching data... [ ok ] [ ok ] [ no ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM222
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM18 detected
Reading data from phone... OK
Searching data... [ ok ] [ ok ] [ no ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM222
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM18 detected
Reading data from phone... OK
Searching data... [ ok ] [ ok ] [ no ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM222
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM18 detected
Reading data from phone... error (0.7)

Done with Samsung Tool PRO v.43.7

sirham · 08-09-2021, 11:10

I have tried for 3days now but same error
I have flashed original updated firmware but same error
Please fix it for us

Checking Login and Password... OK
Balance: 33 crd.
You have 33 credit(s) left. This operation takes 5 credits. Continue? Yes
Waiting for device to become ready... OK
Reading phone info...
Model: SM-A705FN
Android version: 11
PDA version: A705FNXXU5DUE2
CSC version: A705FNOBE5DUE2
Phone version: A705FNXXU5DUD4
Product code: SM-A705FZKUEVR
CSC country code: UK
CSC sales code: EVR
Carrier ID: EVR
Phone SN: R58M62AN2QN
IMEI: 357472107837338
HW version: MP 0.4A0
RF cal date: 2019.06.11
Chip name: SM6150
Modem board: SM6150
Security patch: 2021-05-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Checking saved data... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM222
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM18 detected
Reading data from phone... OK
Searching data... [ ok ] [ ok ] [ no ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM222
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM18 detected
Reading data from phone... OK
Searching data... [ ok ] [ ok ] [ no ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM222
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM18 detected
Reading data from phone... OK
Searching data... [ ok ] [ ok ] [ no ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM222
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM18 detected
Reading data from phone... error (0.7)

Done with Samsung Tool PRO v.43.7

Z3X · 08-09-2021, 11:55

There is no fix for this, just try more times until data will be founded.

sirham · 08-11-2021, 13:58

Sir all the Firmware versions 9,10 reads once but i've tried and tried the android 11 but not catching the data

It will very difficult to unlock just 1 a705fn android 11 new security
Please anyone successfully unlock one?

10-21-2020, 12:17	#1 (permalink)
Pashik91 Major Poster Join Date: Dec 2013 Posts: 43 Member: 2087466 Status: Offline Thanks Meter: 3	SM-A705FN u5 not unlocking [Solved] Checking Login and Password... OK Ballance: 32 crd. You have 32 credit(s) left. This operation takes 10 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-A705FN Android version: 10 PDA version: A705FNXXU5BTH4 CSC version: A705FN3IE5BTH4 Phone version: A705FNXXU5BTH4 Product code: SM-A705FZKU3IE CSC country code: Ireland CSC sales code: 3IE Phone SN: R58M81SBW6N IMEI: 359*********** HW version: MP 0.4A0 RF cal date: 2019.08.07 Chip name: SM6150 Modem board: SM6150 Security patch: 2020-09-01 Boot Warranty bit: 0 SIM State: NETWORK_LOCKED,ABSENT Searching Samsung diag port... detected COM247 Reading phone info... OK Searching Samsung modem... detected COM246 Checking SIM status... error Please check Samsung USB drivers. Disable screenlock(PIN, password, fingerprint and etc...). Disable SIM PIN/PUK code. Done with Samsung Tool PRO v.41.2

08-06-2021, 09:59	#5 (permalink)
sirham Crazy Poster Join Date: Sep 2008 Posts: 52 Member: 872637 Status: Offline Sonork: GHANA Thanks Meter: 6	A70 u5 unlock error Please help Checking Login and Password... OK Balance: 33 crd. You have 33 credit(s) left. This operation takes 5 credits. Continue? Yes Waiting for device to become ready... OK Reading phone info... Model: SM-A705FN Android version: 9 PDA version: A705FNXXU5ASL4 CSC version: A705FNOXM5ASL4 Phone version: A705FNXXU5ASL4 Product code: SM-A705FZKUXEU CSC country code: UK & IRE CSC sales code: XEU Carrier ID: EVR Phone SN: R58M62AN2QN IMEI: 357472107837338 HW version: MP 0.4A0 RF cal date: 2019.06.11 Chip name: SM6150 Modem board: SM6150 Security patch: 2020-01-01 Boot Warranty bit: 0 SIM State: ABSENT,ABSENT Searching Samsung diag port... detected COM222 Initialization zTool... OK Running zTool, please wait... OK Executing... OK Searching Ramdump interface... COM18 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... error (1) Server error: A new security v2 has been detected. If you have downgraded the firmware, update it and use the new software 42.11 or higher. Done with Samsung Tool PRO v.43.7

08-07-2021, 05:50	#8 (permalink)
sirham Crazy Poster Join Date: Sep 2008 Posts: 52 Member: 872637 Status: Offline Sonork: GHANA Thanks Meter: 6	A705fn unlock error Sir still error after phone update Checking Login and Password... OK Balance: 33 crd. You have 33 credit(s) left. This operation takes 5 credits. Continue? Yes Waiting for device to become ready... OK Reading phone info... Model: SM-A705FN Android version: 11 PDA version: A705FNXXU5DUC6 CSC version: A705FNOXM5DUC6 Phone version: A705FNXXU5DUC1 Product code: SM-A705FZKUSEK CSC country code: Ukraine CSC sales code: SEK Carrier ID: EVR Phone SN: R58M62AN2QN IMEI: 357472107837338 HW version: MP 0.4A0 RF cal date: 2019.06.11 Chip name: SM6150 Modem board: SM6150 Security patch: 2021-03-01 Boot Warranty bit: 0 SIM State: ABSENT,ABSENT Rebooting phone... OK Waiting ADB device... OK Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Checking saved data... OK Waiting ADB device... OK Waiting for device to become ready... OK Searching Samsung diag port... detected COM222 Initialization zTool Loader... OK Running zTool, please wait... OK Loading... OK Initialization zTool... OK Running zTool, please wait... OK Executing... OK Searching Ramdump interface... COM18 detected Reading data from phone... OK Searching data... [ ok ] [ ok ] [ no ] ... trying again Waiting ADB device... OK Waiting for device to become ready... OK Searching Samsung diag port... detected COM222 Initialization zTool Loader... OK Running zTool, please wait... OK Loading... OK Initialization zTool... OK Running zTool, please wait... OK Executing... OK Searching Ramdump interface... COM18 detected Reading data from phone... OK Searching data... [ ok ] [ ok ] [ no ] ... trying again Waiting ADB device... OK Waiting for device to become ready... OK Searching Samsung diag port... detected COM222 Initialization zTool Loader... OK Running zTool, please wait... OK Loading... OK Initialization zTool... OK Running zTool, please wait... OK Executing... OK Searching Ramdump interface... COM18 detected Reading data from phone... OK Searching data... [ ok ] [ ok ] [ no ] ... trying again Waiting ADB device... OK Waiting for device to become ready... OK Searching Samsung diag port... detected COM222 Initialization zTool Loader... OK Running zTool, please wait... OK Loading... OK Initialization zTool... OK Running zTool, please wait... OK Executing... OK Searching Ramdump interface... COM18 detected Reading data from phone... OK Searching data... [ ok ] [ ok ] [ no ] ... trying again Waiting ADB device... OK Waiting for device to become ready... error Done with Samsung Tool PRO v.43.7

08-07-2021, 13:40	#10 (permalink)
sirham Crazy Poster Join Date: Sep 2008 Posts: 52 Member: 872637 Status: Offline Sonork: GHANA Thanks Meter: 6	A705fn unlock error I have tried on several times and different PC but still no unlocking On Dell E6430 Core i5 8gb ram but error (searching data ok ok no)

08-11-2021, 13:58	#15 (permalink)
sirham Crazy Poster Join Date: Sep 2008 Posts: 52 Member: 872637 Status: Offline Sonork: GHANA Thanks Meter: 6	A70 u5 unlock error Sir all the Firmware versions 9,10 reads once but i've tried and tried the android 11 but not catching the data It will very difficult to unlock just 1 a705fn android 11 new security Please anyone successfully unlock one?

10-21-2020, 12:42	#2 (permalink)
Pashik91 Major Poster Join Date: Dec 2013 Posts: 43 Member: 2087466 Status: Offline Thanks Meter: 3	Without SIM Card Reading phone info... Model: SM-A705FN Android version: 10 PDA version: A705FNXXU5BTH4 CSC version: A705FN3IE5BTH4 Phone version: A705FNXXU5BTH4 Product code: SM-A705FZKU3IE CSC country code: Ireland CSC sales code: 3IE Phone SN: R58M81SBW6N IMEI: 3593******* HW version: MP 0.4A0 RF cal date: 2019.08.07 Chip name: SM6150 Modem board: SM6150 Security patch: 2020-09-01 Boot Warranty bit: 0 SIM State: ABSENT,ABSENT Searching Samsung diag port... detected COM247 Initialization zTool... OK Running zTool, please wait... OK Executing... OK Searching Ramdump interface... COM103 detected Reading data from phone... OK Calculating... Searching server... OK Waiting for server answer... error (1) Server error: Could not decrypt security data Done with Samsung Tool PRO v.41.3

10-21-2020, 12:57	#3 (permalink)
Z3X Product Supporter Join Date: Feb 2008 Location: z3x Posts: 15,950 Member: 706257 Status: Offline Thanks Meter: 5,065	Hello! Install this firmware and repeat. https://samfrew.com/ru/download/Gala...705FNOXM5ATA1/

10-21-2020, 13:54	#4 (permalink)
Pashik91 Major Poster Join Date: Dec 2013 Posts: 43 Member: 2087466 Status: Offline Thanks Meter: 3	You have 32 credit(s) left. This operation takes 10 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-A705FN Android version: 9 PDA version: A705FNXXU5ASL4 CSC version: A705FNOXM5ASL4 Phone version: A705FNXXU5ASL4 Product code: SM-A705FZKUSEK CSC country code: Ukraine CSC sales code: SEK Phone SN: R58M81SBW6N IMEI: 359320100966430 HW version: MP 0.4A0 RF cal date: 2019.08.07 Chip name: SM6150 Modem board: SM6150 Security patch: 2020-01-01 Boot Warranty bit: 0 SIM State: NETWORK_LOCKED,ABSENT Rebooting phone... OK Waiting ADB device... OK Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... OK Waiting for device to become ready... OK Searching Samsung diag port... detected COM247 Reading phone info... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... OK Executing... OK Searching Ramdump interface... COM103 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Freeze code: 57536025 NET lock: 40684852 SUB lock: 00000000 SP lock: 00000000 CP lock: 00000000 For check lock status: *#7465625# Done with Samsung Tool PRO v.41.3 All is ok Firmware link on gdrive https://drive.google.com/u/0/uc?id=1...xport=download THX!

08-06-2021, 10:43	#6 (permalink)
Z3X Product Supporter Join Date: Feb 2008 Location: z3x Posts: 15,950 Member: 706257 Status: Offline Thanks Meter: 5,065	Hello. Flash this firmware and repeat operation. https://samfrew.com/ru/download/Gala...705FNOXM5DUC6/

08-06-2021, 12:20	#7 (permalink)
sirham Crazy Poster Join Date: Sep 2008 Posts: 52 Member: 872637 Status: Offline Sonork: GHANA Thanks Meter: 6	Please this was Original firmware Model SM-A705FN Model name Galaxy A70 Country United Kingdom (EE) (EVR) Version Android 11 Changelist 21681649 Build date Fri, 07 May 2021 08:05:14 +0000 Security Patch Level 2021-05-01 Product code EVR PDA A705FNXXU5DUE2 CSC A705FNOBE5DUE2

08-09-2021, 11:09	#12 (permalink)
sirham Crazy Poster Join Date: Sep 2008 Posts: 52 Member: 872637 Status: Offline Sonork: GHANA Thanks Meter: 6	I have tried for 3days now but same error I have flashed original updated firmware but same error Please fix it for us Checking Login and Password... OK Balance: 33 crd. You have 33 credit(s) left. This operation takes 5 credits. Continue? Yes Waiting for device to become ready... OK Reading phone info... Model: SM-A705FN Android version: 11 PDA version: A705FNXXU5DUE2 CSC version: A705FNOBE5DUE2 Phone version: A705FNXXU5DUD4 Product code: SM-A705FZKUEVR CSC country code: UK CSC sales code: EVR Carrier ID: EVR Phone SN: R58M62AN2QN IMEI: 357472107837338 HW version: MP 0.4A0 RF cal date: 2019.06.11 Chip name: SM6150 Modem board: SM6150 Security patch: 2021-05-01 Boot Warranty bit: 0 SIM State: ABSENT,ABSENT Checking saved data... OK Waiting ADB device... OK Waiting for device to become ready... OK Searching Samsung diag port... detected COM222 Initialization zTool Loader... OK Running zTool, please wait... OK Loading... OK Initialization zTool... OK Running zTool, please wait... OK Executing... OK Searching Ramdump interface... COM18 detected Reading data from phone... OK Searching data... [ ok ] [ ok ] [ no ] ... trying again Waiting ADB device... OK Waiting for device to become ready... OK Searching Samsung diag port... detected COM222 Initialization zTool Loader... OK Running zTool, please wait... OK Loading... OK Initialization zTool... OK Running zTool, please wait... OK Executing... OK Searching Ramdump interface... COM18 detected Reading data from phone... OK Searching data... [ ok ] [ ok ] [ no ] ... trying again Waiting ADB device... OK Waiting for device to become ready... OK Searching Samsung diag port... detected COM222 Initialization zTool Loader... OK Running zTool, please wait... OK Loading... OK Initialization zTool... OK Running zTool, please wait... OK Executing... OK Searching Ramdump interface... COM18 detected Reading data from phone... OK Searching data... [ ok ] [ ok ] [ no ] ... trying again Waiting ADB device... OK Waiting for device to become ready... OK Searching Samsung diag port... detected COM222 Initialization zTool Loader... OK Running zTool, please wait... OK Loading... OK Initialization zTool... OK Running zTool, please wait... OK Executing... OK Searching Ramdump interface... COM18 detected Reading data from phone... error (0.7) Done with Samsung Tool PRO v.43.7

08-09-2021, 11:10	#13 (permalink)
sirham Crazy Poster Join Date: Sep 2008 Posts: 52 Member: 872637 Status: Offline Sonork: GHANA Thanks Meter: 6	I have tried for 3days now but same error I have flashed original updated firmware but same error Please fix it for us Checking Login and Password... OK Balance: 33 crd. You have 33 credit(s) left. This operation takes 5 credits. Continue? Yes Waiting for device to become ready... OK Reading phone info... Model: SM-A705FN Android version: 11 PDA version: A705FNXXU5DUE2 CSC version: A705FNOBE5DUE2 Phone version: A705FNXXU5DUD4 Product code: SM-A705FZKUEVR CSC country code: UK CSC sales code: EVR Carrier ID: EVR Phone SN: R58M62AN2QN IMEI: 357472107837338 HW version: MP 0.4A0 RF cal date: 2019.06.11 Chip name: SM6150 Modem board: SM6150 Security patch: 2021-05-01 Boot Warranty bit: 0 SIM State: ABSENT,ABSENT Checking saved data... OK Waiting ADB device... OK Waiting for device to become ready... OK Searching Samsung diag port... detected COM222 Initialization zTool Loader... OK Running zTool, please wait... OK Loading... OK Initialization zTool... OK Running zTool, please wait... OK Executing... OK Searching Ramdump interface... COM18 detected Reading data from phone... OK Searching data... [ ok ] [ ok ] [ no ] ... trying again Waiting ADB device... OK Waiting for device to become ready... OK Searching Samsung diag port... detected COM222 Initialization zTool Loader... OK Running zTool, please wait... OK Loading... OK Initialization zTool... OK Running zTool, please wait... OK Executing... OK Searching Ramdump interface... COM18 detected Reading data from phone... OK Searching data... [ ok ] [ ok ] [ no ] ... trying again Waiting ADB device... OK Waiting for device to become ready... OK Searching Samsung diag port... detected COM222 Initialization zTool Loader... OK Running zTool, please wait... OK Loading... OK Initialization zTool... OK Running zTool, please wait... OK Executing... OK Searching Ramdump interface... COM18 detected Reading data from phone... OK Searching data... [ ok ] [ ok ] [ no ] ... trying again Waiting ADB device... OK Waiting for device to become ready... OK Searching Samsung diag port... detected COM222 Initialization zTool Loader... OK Running zTool, please wait... OK Loading... OK Initialization zTool... OK Running zTool, please wait... OK Executing... OK Searching Ramdump interface... COM18 detected Reading data from phone... error (0.7) Done with Samsung Tool PRO v.43.7

08-09-2021, 11:55	#14 (permalink)
Z3X Product Supporter Join Date: Feb 2008 Location: z3x Posts: 15,950 Member: 706257 Status: Offline Thanks Meter: 5,065	There is no fix for this, just try more times until data will be founded.