GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Z3X-Team Products
Reload this Page z3x credits refund [Solved]
Register FAQDonate Forum Rules Root any Device ★iPhone Unlock★ ★ Direct Codes ★ Direct Unlock Source


Reply
Page 1 of 2 1 2
 
LinkBack Thread Tools Display Modes
Old 03-22-2019, 23:53   #1 (permalink)
Major Poster
 
Join Date: May 2013
Posts: 41
Member: 1938255
Status: Offline
Thanks Meter: 28
z3x credits refund [Solved]

Hey team z3x > I was doing a read code for my G960U and first atempt the operation stuck on waiting for server answer and bar went to 100% 10 times with no answer so I cancel and tried again. Second time worked but it took 10 credits again. Can you please refund credits back to my account? The account name is zsc_PDAMXJmj.

Here is log

Operation: Read Codes via Server
Selected model: SM-G960U
Software version: 35.2

Checking Login and Password... OK
Ballance: 25 crd.
You have 25 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G960U
Android version: 8.0.0
PDA version: G960USQS3ARG8
CSC version: G960UOYN3ARG8
Phone version: G960USQS3ARG8
Product code: SM2G960UZPAATT
CSC country code: USA
CSC sales code: ATT
Phone SN: R38K50EYN0F
IMEI: 3548170911***** (hidden imei for safety)
HW version: REV1.1
RF cal date: 2018.05.21
Chip name: SDM845
Modem board: SDM845
Security patch: 2018-08-01
Boot Warranty bit: 0
SIM State: ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Samsung diag port... detected COM272
Reading phone info... OK
Reading data from phone... OK
Searching Ramdump interface... COM30 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer...
Operation aborted

Operation: Read Codes via Server
Selected model: SM-G960U
Software version: 35.2

Checking Login and Password... OK
Ballance: 15 crd.
You have 15 credit(s) left. This operation takes 10 credits.Continue? No
Operation: Read Codes via Server
Selected model: SM-G960U
Software version: 35.2

Checking Login and Password... OK
Ballance: 15 crd.
You have 15 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device... timeout
Phone not found

Operation: Read Codes via Server
Selected model: SM-G960U
Software version: 35.2

Checking Login and Password... OK
Ballance: 15 crd.
You have 15 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device... timeout
Phone not found

Operation: Read Codes via Server
Selected model: SM-G960U
Software version: 35.2

Checking Login and Password... OK
Ballance: 15 crd.
You have 15 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G960U
Android version: 8.0.0
PDA version: G960USQS3ARG8
CSC version: G960UOYN3ARG8
Phone version: G960USQS3ARG8
Product code: SM2G960UZPAATT
CSC country code: USA
CSC sales code: ATT
Phone SN: R38K50EYN0F
IMEI: 3548170911***** (hidden imei for safety)
HW version: REV1.1
RF cal date: 2018.05.21
Chip name: SDM845
Modem board: SDM845
Security patch: 2018-08-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Samsung diag port... detected COM272
Reading phone info... OK
Reading data from phone... OK
Searching Ramdump interface... COM40 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 57586025
NET lock: 14819794
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#
  Reply With Quote
The Following User Says Thank You to Twitchedonjay For This Useful Post:
Old 03-25-2019, 00:53   #2 (permalink)
No Life Poster
 
xerraco's Avatar
 
Join Date: Nov 2008
Location: RVIII
Posts: 11,700
Member: 890926
Status: Offline
Thanks Meter: 2,054
Do this, send email to [email protected] with log, serial# & account for refund.


Br,
xerraco
  Reply With Quote
Old 03-25-2019, 09:27   #3 (permalink)
Product Manager
 
blang's Avatar
 
Join Date: Oct 2000
Location: future
Posts: 22,431
Member: 2368
Status: Offline
Sonork: 100.111111
Thanks Meter: 186,558
Donate money to this user
Hello, please read this: http://forum.gsmhosting.com/vbb/12570835-post2.html
  Reply With Quote
The Following User Says Thank You to blang For This Useful Post:
Old 08-11-2020, 00:19   #4 (permalink)
Junior Member
 
Join Date: Nov 2015
Posts: 2
Member: 2489787
Status: Offline
Thanks Meter: 0
refund please or help unlock
Samsung g530T unlock sucessful but phone still locked.
  Reply With Quote
Old 02-05-2022, 13:28   #5 (permalink)
Junior Member
 
Join Date: Mar 2017
Location: Afghanistan
Posts: 3
Member: 2692941
Status: Offline
Sonork: GULAHMAD
Thanks Meter: 0
hi i need refund for this case my device is locked and tool gives me only mck and cant read nck i lost crd on same mck 2 times
first i had 5 crd in account then i refill it for next step top read nck bat i gived me mck again and lost crd

Checking Login and Password... OK
Balance: 5 crd.
You have 5 credit(s) left. This operation takes 5 credits. Attention! In case if phone asking MCK code, using this method will consume credits twice - first for MCK code and then for NCK. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A217F
Android version: 11
PDA version: A217FXXU5CUD4
CSC version: A217FOXM5CUD4
Phone version: A217FXXU5CUD4
Product code: SM-A217FZRNCAC
CSC country code: Central Asia
CSC sales code: CAC
Carrier ID: CAC
Phone SN: R58NC1RWB4H
IMEI: 350117930071632
HW version: MP 0.500
RF cal date: 20201211
Chip name: EXYNOS850
Modem board: SHANNON318
Security patch: 2021-03-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading lock state... OK
Checking SIM status... OK
Executing... OK
Searching Ramdump interface... COM7 detected
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Reading ramdump data from phone... OK
Calculating... OK
Now only the MCK(Freeze) code will be calculated. Continue? Yes
Searching server... OK
Waiting for server answer... OK
Freeze code (MCK): 59297462

To calculate NCK(Network) code perfom the following operations:
1. Insert the SIM card.
2. Enter the MCK(Freeze) code.
3. Remove the SIM card.
4. Reboot phone.
5. Try again.

Operation: Read Codes via Server [UPLOAD 2021]
Selected model: SM-A217F
Software version: 43.24


and its the next one

Checking Login and Password... OK
Balance: 30 crd.
You have 30 credit(s) left. This operation takes 5 credits. Attention! In case if phone asking MCK code, using this method will consume credits twice - first for MCK code and then for NCK. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A217F
Android version: 11
PDA version: A217FXXU5CUD4
CSC version: A217FOXM5CUD4
Phone version: A217FXXU5CUD4
Product code: SM-A217FZRNCAC
CSC country code: Central Asia
CSC sales code: CAC
Carrier ID: CAC
Phone SN: R58NC1RWB4H
IMEI: 350117930071632
HW version: MP 0.500
RF cal date: 20201211
Chip name: EXYNOS850
Modem board: SHANNON318
Security patch: 2021-03-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading lock state... OK
Checking SIM status... OK
Executing... OK
Searching Ramdump interface... COM7 detected
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Reading ramdump data from phone... OK
Calculating... OK
Now only the MCK(Freeze) code will be calculated. Continue? Yes
Searching server... OK
Waiting for server answer... OK
Freeze code (MCK): 59297462

To calculate NCK(Network) code perfom the following operations:
1. Insert the SIM card.
2. Enter the MCK(Freeze) code.
3. Remove the SIM card.
4. Reboot phone.
5. Try again.

Operation: Read Codes via Server [UPLOAD 2021]
Selected model: SM-A217F
Software version: 43.24
  Reply With Quote
Old 02-05-2022, 15:09   #6 (permalink)
Z3X
Product Supporter
 
Join Date: Feb 2008
Location: z3x
Posts: 15,953
Member: 706257
Status: Offline
Thanks Meter: 5,065
Quote:
Originally Posted by Gulahmad1997 View Post
hi i need refund for this case my device is locked and tool gives me only mck and cant read nck i lost crd on same mck 2 times
first i had 5 crd in account then i refill it for next step top read nck bat i gived me mck again and lost crd

Checking Login and Password... OK
Balance: 5 crd.
You have 5 credit(s) left. This operation takes 5 credits. Attention! In case if phone asking MCK code, using this method will consume credits twice - first for MCK code and then for NCK. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A217F
Android version: 11
PDA version: A217FXXU5CUD4
CSC version: A217FOXM5CUD4
Phone version: A217FXXU5CUD4
Product code: SM-A217FZRNCAC
CSC country code: Central Asia
CSC sales code: CAC
Carrier ID: CAC
Phone SN: R58NC1RWB4H
IMEI: 350117930071632
HW version: MP 0.500
RF cal date: 20201211
Chip name: EXYNOS850
Modem board: SHANNON318
Security patch: 2021-03-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading lock state... OK
Checking SIM status... OK
Executing... OK
Searching Ramdump interface... COM7 detected
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Reading ramdump data from phone... OK
Calculating... OK
Now only the MCK(Freeze) code will be calculated. Continue? Yes
Searching server... OK
Waiting for server answer... OK
Freeze code (MCK): 59297462

To calculate NCK(Network) code perfom the following operations:
1. Insert the SIM card.
2. Enter the MCK(Freeze) code.
3. Remove the SIM card.
4. Reboot phone.
5. Try again.

Operation: Read Codes via Server [UPLOAD 2021]
Selected model: SM-A217F
Software version: 43.24


and its the next one

Checking Login and Password... OK
Balance: 30 crd.
You have 30 credit(s) left. This operation takes 5 credits. Attention! In case if phone asking MCK code, using this method will consume credits twice - first for MCK code and then for NCK. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A217F
Android version: 11
PDA version: A217FXXU5CUD4
CSC version: A217FOXM5CUD4
Phone version: A217FXXU5CUD4
Product code: SM-A217FZRNCAC
CSC country code: Central Asia
CSC sales code: CAC
Carrier ID: CAC
Phone SN: R58NC1RWB4H
IMEI: 350117930071632
HW version: MP 0.500
RF cal date: 20201211
Chip name: EXYNOS850
Modem board: SHANNON318
Security patch: 2021-03-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading lock state... OK
Checking SIM status... OK
Executing... OK
Searching Ramdump interface... COM7 detected
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Reading ramdump data from phone... OK
Calculating... OK
Now only the MCK(Freeze) code will be calculated. Continue? Yes
Searching server... OK
Waiting for server answer... OK
Freeze code (MCK): 59297462

To calculate NCK(Network) code perfom the following operations:
1. Insert the SIM card.
2. Enter the MCK(Freeze) code.
3. Remove the SIM card.
4. Reboot phone.
5. Try again.

Operation: Read Codes via Server [UPLOAD 2021]
Selected model: SM-A217F
Software version: 43.24
Hello. 5 credits refunded. Reflash phone and repeat operation please.
  Reply With Quote
Old 03-08-2022, 12:02   #7 (permalink)
Freak Poster
 
Join Date: Mar 2017
Location: cote-d'Ivoire - abidjan
Posts: 156
Member: 2690942
Status: Offline
Sonork: 112356
Thanks Meter: 4
hi to all the team. I need to be refunded for 12 credits taken without unlock the phone .
here is the log:
[ SM-G960U Unlock ] Operation: Unlock AppLock (TMB/ATT) via Server
[ SM-G960U Unlock ] Selected model: SM-G960U
[ SM-G960U Unlock ] Software version: 43.27
[ SM-G960U Unlock ]
[ SM-G960U Unlock ] Checking Login and Password... OK
[ SM-G960U Unlock ] Balance: 12 crd.
[ SM-G960U Unlock ] You have 12 credit(s) left. This operation takes 6 credits. Continue? Yes
[ SM-G960U Unlock ] Waiting ADB device... OK
[ SM-G960U Unlock ] Reading phone info...
[ SM-G960U Unlock ] Model: SM-G960U
[ SM-G960U Unlock ] Android version: 10
[ SM-G960U Unlock ] PDA version: G960USQU8FTJ3
[ SM-G960U Unlock ] CSC version: G960UOYN8FTJ3
[ SM-G960U Unlock ] Phone version: G960USQU8FTJ3
[ SM-G960U Unlock ] Product code: SM2G960UZKATMB
[ SM-G960U Unlock ] CSC country code: USA
[ SM-G960U Unlock ] CSC sales code: TMB
[ SM-G960U Unlock ] Carrier ID: TMB
[ SM-G960U Unlock ] Phone SN: 31314a424f553098
[ SM-G960U Unlock ] IMEI: 356915091058114
[ SM-G960U Unlock ] HW version: REV1.1
[ SM-G960U Unlock ] RF cal date: 2018.07.20
[ SM-G960U Unlock ] Chip name: SDM845
[ SM-G960U Unlock ] Modem board: SDM845
[ SM-G960U Unlock ] Security patch: 2020-10-01
[ SM-G960U Unlock ] Boot Warranty bit: 0
[ SM-G960U Unlock ] SIM State: ABSENT
[ SM-G960U Unlock ] Rebooting phone... OK
[ SM-G960U Unlock ] Waiting ADB device... OK
[ SM-G960U Unlock ] Rebooting phone... OK
[ SM-G960U Unlock ] Waiting ADB device... OK
[ SM-G960U Unlock ] Waiting for device to become ready... OK
[ SM-G960U Unlock ] Searching Samsung diag port... detected COM47
[ SM-G960U Unlock ] Initialization zTool... OK
[ SM-G960U Unlock ] Running zTool, please wait... OK
[ SM-G960U Unlock ] Reading data from phone... OK
[ SM-G960U Unlock ] Rebooting to upload... OK
[ SM-G960U Unlock ] Searching Ramdump interface... COM22 detected
[ SM-G960U Unlock ] Reading data from phone... OK
[ SM-G960U Unlock ] Calculating... OK
[ SM-G960U Unlock ] Searching server... OK
[ SM-G960U Unlock ] Waiting for server answer... OK
[ SM-G960U Unlock ] Waiting ADB device... timeout
[ SM-G960U Unlock ] Phone not found
[ SM-G960U Unlock ]
[ SM-G960U Unlock ] Operation: Unlock AppLock (TMB/ATT) via Server
[ SM-G960U Unlock ] Selected model: SM-G960U
[ SM-G960U Unlock ] Software version: 43.27
[ SM-G960U Unlock ]
[ SM-G960U Unlock ] Checking Login and Password... OK
[ SM-G960U Unlock ] Balance: 6 crd.
[ SM-G960U Unlock ] You have 6 credit(s) left. This operation takes 6 credits. Continue? Yes
[ SM-G960U Unlock ] Waiting ADB device... OK
[ SM-G960U Unlock ] Reading phone info...
[ SM-G960U Unlock ] Model: SM-G960U
[ SM-G960U Unlock ] Android version: 10
[ SM-G960U Unlock ] PDA version: G960USQU8FTJ3
[ SM-G960U Unlock ] CSC version: G960UOYN8FTJ3
[ SM-G960U Unlock ] Phone version: G960USQU8FTJ3
[ SM-G960U Unlock ] Product code: SM2G960UZKATMB
[ SM-G960U Unlock ] CSC country code: USA
[ SM-G960U Unlock ] CSC sales code: TMB
[ SM-G960U Unlock ] Carrier ID: TMB
[ SM-G960U Unlock ] Phone SN: 31314a424f553098
[ SM-G960U Unlock ] IMEI: 356915091058114
[ SM-G960U Unlock ] HW version: REV1.1
[ SM-G960U Unlock ] RF cal date: 2018.07.20
[ SM-G960U Unlock ] Chip name: SDM845
[ SM-G960U Unlock ] Modem board: SDM845
[ SM-G960U Unlock ] Security patch: 2020-10-01
[ SM-G960U Unlock ] Boot Warranty bit: 0
[ SM-G960U Unlock ] SIM State: ABSENT
[ SM-G960U Unlock ] Waiting for device to become ready... OK
[ SM-G960U Unlock ] Searching Samsung diag port... detected COM47
[ SM-G960U Unlock ] Initialization zTool... OK
[ SM-G960U Unlock ] Running zTool, please wait... OK
[ SM-G960U Unlock ] Reading data from phone... OK
[ SM-G960U Unlock ] Rebooting to upload... OK
[ SM-G960U Unlock ] Searching Ramdump interface... COM22 detected
[ SM-G960U Unlock ] Reading data from phone... OK
[ SM-G960U Unlock ] Calculating... OK
[ SM-G960U Unlock ] Searching server... OK
[ SM-G960U Unlock ] Waiting for server answer... OK
[ SM-G960U Unlock ] Waiting ADB device... OK
[ SM-G960U Unlock ] Waiting for device to become ready... OK
[ SM-G960U Unlock ] Initialization zTool...
[ SM-G960U Unlock ] Operation: Unlock AppLock (TMB/ATT) via Server
[ SM-G960U Unlock ] Selected model: SM-G960U
[ SM-G960U Unlock ] Software version: 43.27
[ SM-G960U Unlock ]
[ SM-G960U Unlock ] Checking Login and Password... OK
[ SM-G960U Unlock ] Balance: 0 crd.
[ SM-G960U Unlock ] Not enough credits
  Reply With Quote
Old 03-08-2022, 12:25   #8 (permalink)
Z3X
Product Supporter
 
Join Date: Feb 2008
Location: z3x
Posts: 15,953
Member: 706257
Status: Offline
Thanks Meter: 5,065
Quote:
Originally Posted by El_kabir View Post
hi to all the team. I need to be refunded for 12 credits taken without unlock the phone .
here is the log:
[ SM-G960U Unlock ] Operation: Unlock AppLock (TMB/ATT) via Server
[ SM-G960U Unlock ] Selected model: SM-G960U
[ SM-G960U Unlock ] Software version: 43.27
[ SM-G960U Unlock ]
[ SM-G960U Unlock ] Checking Login and Password... OK
[ SM-G960U Unlock ] Balance: 12 crd.
[ SM-G960U Unlock ] You have 12 credit(s) left. This operation takes 6 credits. Continue? Yes
[ SM-G960U Unlock ] Waiting ADB device... OK
[ SM-G960U Unlock ] Reading phone info...
[ SM-G960U Unlock ] Model: SM-G960U
[ SM-G960U Unlock ] Android version: 10
[ SM-G960U Unlock ] PDA version: G960USQU8FTJ3
[ SM-G960U Unlock ] CSC version: G960UOYN8FTJ3
[ SM-G960U Unlock ] Phone version: G960USQU8FTJ3
[ SM-G960U Unlock ] Product code: SM2G960UZKATMB
[ SM-G960U Unlock ] CSC country code: USA
[ SM-G960U Unlock ] CSC sales code: TMB
[ SM-G960U Unlock ] Carrier ID: TMB
[ SM-G960U Unlock ] Phone SN: 31314a424f553098
[ SM-G960U Unlock ] IMEI: 356915091058114
[ SM-G960U Unlock ] HW version: REV1.1
[ SM-G960U Unlock ] RF cal date: 2018.07.20
[ SM-G960U Unlock ] Chip name: SDM845
[ SM-G960U Unlock ] Modem board: SDM845
[ SM-G960U Unlock ] Security patch: 2020-10-01
[ SM-G960U Unlock ] Boot Warranty bit: 0
[ SM-G960U Unlock ] SIM State: ABSENT
[ SM-G960U Unlock ] Rebooting phone... OK
[ SM-G960U Unlock ] Waiting ADB device... OK
[ SM-G960U Unlock ] Rebooting phone... OK
[ SM-G960U Unlock ] Waiting ADB device... OK
[ SM-G960U Unlock ] Waiting for device to become ready... OK
[ SM-G960U Unlock ] Searching Samsung diag port... detected COM47
[ SM-G960U Unlock ] Initialization zTool... OK
[ SM-G960U Unlock ] Running zTool, please wait... OK
[ SM-G960U Unlock ] Reading data from phone... OK
[ SM-G960U Unlock ] Rebooting to upload... OK
[ SM-G960U Unlock ] Searching Ramdump interface... COM22 detected
[ SM-G960U Unlock ] Reading data from phone... OK
[ SM-G960U Unlock ] Calculating... OK
[ SM-G960U Unlock ] Searching server... OK
[ SM-G960U Unlock ] Waiting for server answer... OK
[ SM-G960U Unlock ] Waiting ADB device... timeout
[ SM-G960U Unlock ] Phone not found
[ SM-G960U Unlock ]
[ SM-G960U Unlock ] Operation: Unlock AppLock (TMB/ATT) via Server
[ SM-G960U Unlock ] Selected model: SM-G960U
[ SM-G960U Unlock ] Software version: 43.27
[ SM-G960U Unlock ]
[ SM-G960U Unlock ] Checking Login and Password... OK
[ SM-G960U Unlock ] Balance: 6 crd.
[ SM-G960U Unlock ] You have 6 credit(s) left. This operation takes 6 credits. Continue? Yes
[ SM-G960U Unlock ] Waiting ADB device... OK
[ SM-G960U Unlock ] Reading phone info...
[ SM-G960U Unlock ] Model: SM-G960U
[ SM-G960U Unlock ] Android version: 10
[ SM-G960U Unlock ] PDA version: G960USQU8FTJ3
[ SM-G960U Unlock ] CSC version: G960UOYN8FTJ3
[ SM-G960U Unlock ] Phone version: G960USQU8FTJ3
[ SM-G960U Unlock ] Product code: SM2G960UZKATMB
[ SM-G960U Unlock ] CSC country code: USA
[ SM-G960U Unlock ] CSC sales code: TMB
[ SM-G960U Unlock ] Carrier ID: TMB
[ SM-G960U Unlock ] Phone SN: 31314a424f553098
[ SM-G960U Unlock ] IMEI: 356915091058114
[ SM-G960U Unlock ] HW version: REV1.1
[ SM-G960U Unlock ] RF cal date: 2018.07.20
[ SM-G960U Unlock ] Chip name: SDM845
[ SM-G960U Unlock ] Modem board: SDM845
[ SM-G960U Unlock ] Security patch: 2020-10-01
[ SM-G960U Unlock ] Boot Warranty bit: 0
[ SM-G960U Unlock ] SIM State: ABSENT
[ SM-G960U Unlock ] Waiting for device to become ready... OK
[ SM-G960U Unlock ] Searching Samsung diag port... detected COM47
[ SM-G960U Unlock ] Initialization zTool... OK
[ SM-G960U Unlock ] Running zTool, please wait... OK
[ SM-G960U Unlock ] Reading data from phone... OK
[ SM-G960U Unlock ] Rebooting to upload... OK
[ SM-G960U Unlock ] Searching Ramdump interface... COM22 detected
[ SM-G960U Unlock ] Reading data from phone... OK
[ SM-G960U Unlock ] Calculating... OK
[ SM-G960U Unlock ] Searching server... OK
[ SM-G960U Unlock ] Waiting for server answer... OK
[ SM-G960U Unlock ] Waiting ADB device... OK
[ SM-G960U Unlock ] Waiting for device to become ready... OK
[ SM-G960U Unlock ] Initialization zTool...
[ SM-G960U Unlock ] Operation: Unlock AppLock (TMB/ATT) via Server
[ SM-G960U Unlock ] Selected model: SM-G960U
[ SM-G960U Unlock ] Software version: 43.27
[ SM-G960U Unlock ]
[ SM-G960U Unlock ] Checking Login and Password... OK
[ SM-G960U Unlock ] Balance: 0 crd.
[ SM-G960U Unlock ] Not enough credits
Hello. Refunded. Repeat operation please.
  Reply With Quote
Old 10-19-2022, 01:29   #9 (permalink)
Junior Member
 
Join Date: Nov 2009
Location: Ecuador
Posts: 6
Member: 1157603
Status: Offline
Thanks Meter: 0
return credits please error

Checking Login and Password... OK
Balance: 7 crd.
You have 7 credit(s) left. This operation takes 6 credits. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G960U
Android version: 10
PDA version: G960USQS9FUA2
CSC version: G960UOYN9FUA2
Phone version: G960USQS9FUA2
Product code: SM2G960UZKATMB
CSC country code: USA
CSC sales code: TMB
Carrier ID: TMB
Phone SN: 36453357524f3098
IMEI: 356915090226563
HW version: REV1.1
RF cal date: 2018.05.30
Chip name: SDM845
Modem board: SDM845
Security patch: 2021-01-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM115
Reading IMEI... OK
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Ramdump interface... COM7 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... error (0.)
Retry 1...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 2...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 3...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 4...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 5...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 6...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 7...
Operation aborted
  Reply With Quote
Old 10-19-2022, 07:12   #10 (permalink)
Z3X
Product Supporter
 
Join Date: Feb 2008
Location: z3x
Posts: 15,953
Member: 706257
Status: Offline
Thanks Meter: 5,065
Quote:
Originally Posted by EXIT88 View Post
return credits please error

Checking Login and Password... OK
Balance: 7 crd.
You have 7 credit(s) left. This operation takes 6 credits. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G960U
Android version: 10
PDA version: G960USQS9FUA2
CSC version: G960UOYN9FUA2
Phone version: G960USQS9FUA2
Product code: SM2G960UZKATMB
CSC country code: USA
CSC sales code: TMB
Carrier ID: TMB
Phone SN: 36453357524f3098
IMEI: 356915090226563
HW version: REV1.1
RF cal date: 2018.05.30
Chip name: SDM845
Modem board: SDM845
Security patch: 2021-01-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM115
Reading IMEI... OK
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Ramdump interface... COM7 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... error (0.)
Retry 1...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 2...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 3...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 4...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 5...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 6...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 7...
Operation aborted
Hello. Provide your login.
  Reply With Quote
Old 10-19-2022, 15:48   #11 (permalink)
Junior Member
 
Join Date: Nov 2009
Location: Ecuador
Posts: 6
Member: 1157603
Status: Offline
Thanks Meter: 0
Quote:
Originally Posted by Z3X View Post
Hello. Provide your login.
login

zsc_j0pqdROL
  Reply With Quote
Old 10-19-2022, 18:01   #12 (permalink)
Z3X
Product Supporter
 
Join Date: Feb 2008
Location: z3x
Posts: 15,953
Member: 706257
Status: Offline
Thanks Meter: 5,065
Quote:
Originally Posted by EXIT88 View Post
login

zsc_j0pqdROL
Refunded. Reset phone and repeat operation.
  Reply With Quote
Old 10-19-2022, 19:00   #13 (permalink)
Junior Member
 
Join Date: Nov 2009
Location: Ecuador
Posts: 6
Member: 1157603
Status: Offline
Thanks Meter: 0
Operation: Unlock AppLock (TMB/ATT) via Server
Selected model: SM-G960U
Software version: 44.15

Checking Login and Password... OK
Balance: 7 crd.
You have 7 credit(s) left. This operation takes 6 credits. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G960U
Android version: 10
PDA version: G960USQS9FUB2
CSC version: G960UOYN9FUB2
Phone version: G960USQS9FUB2
Product code: SM2G960UZKATMB
CSC country code: USA
CSC sales code: TMB
Carrier ID: TMB
Phone SN: 36453357524f3098
IMEI: 356915090226563
HW version: REV1.1
RF cal date: 2018.05.30
Chip name: SDM845
Modem board: SDM845
Security patch: 2021-02-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM115
Reading IMEI... OK
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Ramdump interface... COM7 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool Loader... error (2)
Retry 1...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 2...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 3...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 4...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 5...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 6...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 7...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 8...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 9...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 10...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)

Operation: Unlock AppLock (TMB/ATT) via Server
Selected model: SM-G960U
Software version: 44.15

Checking Login and Password... OK
Balance: 1 crd.
Not enough credits
  Reply With Quote
Old 10-19-2022, 19:01   #14 (permalink)
Junior Member
 
Join Date: Nov 2009
Location: Ecuador
Posts: 6
Member: 1157603
Status: Offline
Thanks Meter: 0
Operation: Unlock AppLock (TMB/ATT) via Server
Selected model: SM-G960U
Software version: 44.15

Checking Login and Password... OK
Balance: 7 crd.
You have 7 credit(s) left. This operation takes 6 credits. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G960U
Android version: 10
PDA version: G960USQS9FUB2
CSC version: G960UOYN9FUB2
Phone version: G960USQS9FUB2
Product code: SM2G960UZKATMB
CSC country code: USA
CSC sales code: TMB
Carrier ID: TMB
Phone SN: 36453357524f3098
IMEI: 356915090226563
HW version: REV1.1
RF cal date: 2018.05.30
Chip name: SDM845
Modem board: SDM845
Security patch: 2021-02-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM115
Reading IMEI... OK
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Ramdump interface... COM7 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool Loader... error (2)
Retry 1...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 2...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 3...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 4...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 5...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 6...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 7...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 8...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 9...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 10...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)

Operation: Unlock AppLock (TMB/ATT) via Server
Selected model: SM-G960U
Software version: 44.15

Checking Login and Password... OK
Balance: 1 crd.
Not enough credits
  Reply With Quote
Old 10-19-2022, 19:34   #15 (permalink)
Z3X
Product Supporter
 
Join Date: Feb 2008
Location: z3x
Posts: 15,953
Member: 706257
Status: Offline
Thanks Meter: 5,065
Quote:
Originally Posted by EXIT88 View Post
Operation: Unlock AppLock (TMB/ATT) via Server
Selected model: SM-G960U
Software version: 44.15

Checking Login and Password... OK
Balance: 7 crd.
You have 7 credit(s) left. This operation takes 6 credits. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G960U
Android version: 10
PDA version: G960USQS9FUB2
CSC version: G960UOYN9FUB2
Phone version: G960USQS9FUB2
Product code: SM2G960UZKATMB
CSC country code: USA
CSC sales code: TMB
Carrier ID: TMB
Phone SN: 36453357524f3098
IMEI: 356915090226563
HW version: REV1.1
RF cal date: 2018.05.30
Chip name: SDM845
Modem board: SDM845
Security patch: 2021-02-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM115
Reading IMEI... OK
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Ramdump interface... COM7 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool Loader... error (2)
Retry 1...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 2...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 3...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 4...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 5...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 6...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 7...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 8...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 9...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 10...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)

Operation: Unlock AppLock (TMB/ATT) via Server
Selected model: SM-G960U
Software version: 44.15

Checking Login and Password... OK
Balance: 1 crd.
Not enough credits
Refunded. Flash G960USQU9FUB5 and repeat operation.
  Reply With Quote
Reply
Page 1 of 2 1 2

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 



All times are GMT +1. The time now is 14:28.

Contact Us - GSM-Forum - Archive - Top


Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.38365 seconds with 8 queries

SEO by vBSEO