here is the solution for error 1011 (a baseband error) - GSM-Forum

kissssna · 01-23-2009, 16:12

step 1.) downgrade iphone to fw1.1.1 and use ibrick to activate it. while using if it shows green screen, restore it again in same green screen mode with fe 1.1.1.
after restoring u will again get error 1011-just ibrick it again and now again restore it to 1.1.1 and in recovery mode restore it to 1.1.4 and unlock it with eZiPhoneTools1.3 thane restore to fw 1.1.4 without any error

link for eZiPhoneTools1.3
http://rapidshare.com/files/18822843...ls1.3.zip.html

dont forget to press
thanx

kissssna · 01-23-2009, 19:53

step 1) downgrade iphone 1.1.1 and ibrick it to activate it .( if it shows green screen restore it again in same green screen)
step 2) after restoring it will show the same error "1011" again ibrick it now it will show red screen. wait for a few seconds iphone will get on with an activating itunes screen iphone is in
emergency mode
step 3) now slide to unlock and see if ur keypad is working or not if not than turn your iphones silent mode switch down (turn it off) and try ussing keypad it will work just press *3001#12345#*
and call button and check your iphone version (version>frimware version)
step 4) if it shows fw version its ok and if not than restore it again to 1.1.1 it will still stuck in recovery mode with same error "1011"
step 5) now in recovery mode restore it with fw 1.1.4 after restoring u will get error "1015" iphone is still stuck in recovery mode
step 6) try to remove it from recovery mode via iliberty+ (if does not succed in removing it from recovery mode again restore it with fw 1.1.4 for the last time)
step 7) now iphone must be in normal mode use "eZiPhoneTools1.3 " to unlock and activate jailbreak
step 8) all the problem solved no more grey wifi and bluetooth no blank imei iccid baseband .

http://rapidshare.com/files/18822843...ls1.3.zip.html

try it 100% works
post the results

dont forget to
thanx

lakshi · 01-23-2009, 20:25

Just one question, how do i activate the phone using iBrickr?

Sonu Jawed · 01-23-2009, 20:59

Links Are Not Working
Post Again

B.R.,
Sonu

kissssna · 01-24-2009, 06:15

Quote:

Originally Posted by lakshi

Just one question, how do i activate the phone using iBrickr?

ibrickr> boot and it will show red screen wait for few seconds the phone will on automatically

helder2 · 01-24-2009, 06:58

please post new link for eZiPhoneTools1.3

Thanks.

singhdeep · 01-24-2009, 07:05

yes
please post new link for eZiPhoneTools1.3

-=whitezaNder=- · 01-24-2009, 07:08

yes link not w0rking m8.....

kissssna · 01-24-2009, 07:11

Quote:

Originally Posted by -=whitezaNder=-

yes link not w0rking m8.....

http://www.zshare.net/download/5458035014e738f8/

aleks71 · 01-24-2009, 10:37

not working

not solution

lakshi · 01-24-2009, 10:50

Solution not working, i get stuck in step 5, when i restore with fw 1.1.4 i still get error 1011....any ideas?

kissssna · 01-24-2009, 13:12

Quote:

Originally Posted by lakshi

Solution not working, i get stuck in step 5, when i restore with fw 1.1.4 i still get error 1011....any ideas?

use eziphonetool too downgrade baseband and restore it again

lakshi · 01-24-2009, 18:19

Quote:

Originally Posted by kissssna

use eziphonetool too downgrade baseband and restore it again

I tried that. still getting error 1011 with restoring to 1.1.4...?

kissssna · 01-24-2009, 18:25

Quote:

Originally Posted by lakshi

I tried that. still getting error 1011 with restoring to 1.1.4...?

put it in dfu mode and restore and then use eziphonetool

kissssna · 01-24-2009, 18:38

if eziphonetool shows iphone is detected in dfu mode than just unplug the cable and connect it again it works

01-23-2009, 16:12	#1 (permalink)
kissssna Freak Poster Join Date: Jul 2008 Location: india,mumbai Age: 34 Posts: 446 Member: 810694 Status: Offline Thanks Meter: 30	here is the solution for error 1011 (a baseband error) step 1.) downgrade iphone to fw1.1.1 and use ibrick to activate it. while using if it shows green screen, restore it again in same green screen mode with fe 1.1.1. after restoring u will again get error 1011-just ibrick it again and now again restore it to 1.1.1 and in recovery mode restore it to 1.1.4 and unlock it with eZiPhoneTools1.3 thane restore to fw 1.1.4 without any error link for eZiPhoneTools1.3 http://rapidshare.com/files/18822843...ls1.3.zip.html dont forget to press thanx

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
here is the solution for those which have problems with usb-smart 8,6	gsm54	Dongle Problems (USB-Smart)	0	07-16-2006 15:04
Here is the solution for A70 Blinking	microtel	SST-Dongle	1	10-11-2005 12:14
If you don't have PayPal... here is the solution for money transfer...	Spalato	Off Topic Zone	1	04-21-2005 09:48
Here is the solution for Neptune no display!!	Uvedovle	Mitsubishi	2	01-01-2004 14:23
here is the solution for lock2 on 3210!and new software for nokia 100% clean	oskarcore	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	12-29-1999 22:11

01-23-2009, 19:53	#2 (permalink)
kissssna Freak Poster Join Date: Jul 2008 Location: india,mumbai Age: 34 Posts: 446 Member: 810694 Status: Offline Thanks Meter: 30	step 1) downgrade iphone 1.1.1 and ibrick it to activate it .( if it shows green screen restore it again in same green screen) step 2) after restoring it will show the same error "1011" again ibrick it now it will show red screen. wait for a few seconds iphone will get on with an activating itunes screen iphone is in emergency mode step 3) now slide to unlock and see if ur keypad is working or not if not than turn your iphones silent mode switch down (turn it off) and try ussing keypad it will work just press 3001#12345# and call button and check your iphone version (version>frimware version) step 4) if it shows fw version its ok and if not than restore it again to 1.1.1 it will still stuck in recovery mode with same error "1011" step 5) now in recovery mode restore it with fw 1.1.4 after restoring u will get error "1015" iphone is still stuck in recovery mode step 6) try to remove it from recovery mode via iliberty+ (if does not succed in removing it from recovery mode again restore it with fw 1.1.4 for the last time) step 7) now iphone must be in normal mode use "eZiPhoneTools1.3 " to unlock and activate jailbreak step 8) all the problem solved no more grey wifi and bluetooth no blank imei iccid baseband . http://rapidshare.com/files/18822843...ls1.3.zip.html try it 100% works post the results dont forget to thanx

01-23-2009, 20:25	#3 (permalink)
lakshi Freak Poster Join Date: Dec 2007 Posts: 184 Member: 661887 Status: Offline Thanks Meter: 9	Just one question, how do i activate the phone using iBrickr?

01-23-2009, 20:59	#4 (permalink)
Sonu Jawed No Life Poster Join Date: Feb 2007 Location: Pakistan Age: 36 Posts: 1,395 Member: 447849 Status: Offline Sonork: 100.1604076 Thanks Meter: 593	Links Are Not Working Post Again B.R., Sonu

01-24-2009, 06:58	#6 (permalink)
helder2 Junior Member Join Date: Feb 2005 Age: 47 Posts: 25 Member: 114276 Status: Offline Thanks Meter: 32	please post new link for eZiPhoneTools1.3 Thanks.

01-24-2009, 07:05	#7 (permalink)
singhdeep No Life Poster Join Date: Nov 2006 Location: country of five rivers Posts: 943 Member: 395477 Status: Offline Sonork: 100.1602978 Thanks Meter: 140	yes please post new link for eZiPhoneTools1.3

01-24-2009, 07:08	#8 (permalink)
-=whitezaNder=- Freak Poster Join Date: Apr 2007 Posts: 380 Member: 484671 Status: Offline Thanks Meter: 81	yes link not w0rking m8.....

01-24-2009, 10:37	#10 (permalink)
aleks71 Junior Member Join Date: Dec 2005 Posts: 19 Member: 208985 Status: Offline Thanks Meter: 1	not working not solution

01-24-2009, 10:50	#11 (permalink)
lakshi Freak Poster Join Date: Dec 2007 Posts: 184 Member: 661887 Status: Offline Thanks Meter: 9	Solution not working, i get stuck in step 5, when i restore with fw 1.1.4 i still get error 1011....any ideas?

01-24-2009, 18:38	#15 (permalink)
kissssna Freak Poster Join Date: Jul 2008 Location: india,mumbai Age: 34 Posts: 446 Member: 810694 Status: Offline Thanks Meter: 30	if eziphonetool shows iphone is detected in dfu mode than just unplug the cable and connect it again it works