i PHONE BACKLIGHAT PROBLAM HELP ME - GSM-Forum

anvaranvar · 04-15-2012, 16:55

So my husband is having trouble with his phone when he answers a call the screen NEVER goes dark so he is forever hitting mute or speaker phone with his cheek. He has iOS5. Any ideas?

emeritus roy · 04-15-2012, 17:27

the proximity flex senor flex needs to be replaced. the flex is with the on/off button flex.

anvaranvar · 04-15-2012, 18:15

thanx bro keep it up

Rimal · 04-15-2012, 20:02

Hi i have a tested this fault ....in this case fone gone in black screen but work properly ..just check the home key when home key is hard phone gose on black screen some time in duf mode ..check this

rene325 · 04-15-2012, 23:23

Hello,
if change the proxy sensor flex does not help, please check this : After a digitizer change, there sometimes can get a small amount of light out from the display, that trigger the proxy sensor, so it can't see when it is near a face. Solution is to us black tape around the proxy sensor, between the frame and digitizer. This problem is seem much more on iPhone 4 - and not on 4S (they have this fix from factory).

alinh · 04-16-2012, 04:27

I think u need require the screen. If it can't require, maybe it replaces new screen.

JOULE9 · 06-05-2012, 02:20

Hi
i have the same problem and i changed the flex but it steal the same, and i changed the software to 5.1.1 and erase all the phone but never work
help please

FIXSTATION · 06-05-2012, 04:52

The iPhone screen was probably been replaced by a bad batch. Replacing the proximity fled will not help.

Solution:

Use a permanent black marker and coloured the digitizer.

Put the iPhone back together "temporary (no screws)" and test the proximity sensitivity. If the LCD still doesn’t switch off during a call then apply more marker.

If it doesn’t light up after a call then scratch the marked spot to shed more light.

FIXSTATION – Australia leading mobile repair.

04-15-2012, 16:55	#1 (permalink)
anvaranvar No Life Poster Join Date: Mar 2008 Location: -----( DUBAI )----- Posts: 646 Member: 716065 Status: Offline Sonork: NOT User Sonork Thanks Meter: 353	i PHONE BACKLIGHAT PROBLAM HELP ME So my husband is having trouble with his phone when he answers a call the screen NEVER goes dark so he is forever hitting mute or speaker phone with his cheek. He has iOS5. Any ideas?

04-15-2012, 17:27	#2 (permalink)
emeritus roy Junior Member Join Date: Aug 2011 Posts: 23 Member: 1644848 Status: Offline Thanks Meter: 3	hi the proximity flex senor flex needs to be replaced. the flex is with the on/off button flex.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP!!! BACKGROUND SCREEN LOGO	Michael Go	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	11-23-2017 08:11
news headlines to gsm phone	mos	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	05-22-2016 11:42
Eeprom dump lost, help needed.	CAMILO	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	11-29-2010 19:04
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29

04-15-2012, 18:15	#3 (permalink)
anvaranvar No Life Poster Join Date: Mar 2008 Location: -----( DUBAI )----- Posts: 646 Member: 716065 Status: Offline Sonork: NOT User Sonork Thanks Meter: 353	thanx bro keep it up

04-15-2012, 20:02	#4 (permalink)
Rimal Major Poster Join Date: Nov 2005 Location: In your Eyes Posts: 44 Member: 202786 Status: Offline Thanks Meter: 2	Hi i have a tested this fault ....in this case fone gone in black screen but work properly ..just check the home key when home key is hard phone gose on black screen some time in duf mode ..check this

04-15-2012, 23:23	#5 (permalink)
rene325 Junior Member Join Date: Nov 2010 Location: Denmark Posts: 17 Member: 1451453 Status: Offline Thanks Meter: 4	Hello, if change the proxy sensor flex does not help, please check this : After a digitizer change, there sometimes can get a small amount of light out from the display, that trigger the proxy sensor, so it can't see when it is near a face. Solution is to us black tape around the proxy sensor, between the frame and digitizer. This problem is seem much more on iPhone 4 - and not on 4S (they have this fix from factory).

04-16-2012, 04:27	#6 (permalink)
alinh Insane Poster Join Date: Aug 2011 Location: America Posts: 60 Member: 1631663 Status: Offline Thanks Meter: 0	I think u need require the screen. If it can't require, maybe it replaces new screen.

06-05-2012, 02:20	#7 (permalink)
JOULE9 Insane Poster Join Date: Feb 2010 Location: TUNISIA Posts: 68 Member: 1244858 Status: Offline Thanks Meter: 17	Hi i have the same problem and i changed the flex but it steal the same, and i changed the software to 5.1.1 and erase all the phone but never work help please

06-05-2012, 04:52	#8 (permalink)
FIXSTATION Junior Member Join Date: Dec 2011 Posts: 26 Member: 1701344 Status: Offline Sonork: FIXSTATION Thanks Meter: 19	The iPhone screen was probably been replaced by a bad batch. Replacing the proximity fled will not help. Solution: Use a permanent black marker and coloured the digitizer. Put the iPhone back together "temporary (no screws)" and test the proximity sensitivity. If the LCD still doesn’t switch off during a call then apply more marker. If it doesn’t light up after a call then scratch the marked spot to shed more light. FIXSTATION – Australia leading mobile repair.