LG G4 mt6572 dead after flash

[parvizhamidi]

Hi,
A customer broad me a phone LG G4 mt6572 and it was on hang on logo.
first, I did backup the phone's firmware, then did flash the phone with the firmware "LG G4_MT6572_4.4.2_ALPS.KK1.MP7.V1.7" but the flash process give me an error and phone died.
Then I tried flash whit the two another firmware " LG_G4_H815T_MT6572 Scatter File" and "LG_G4_H815T_MT6572 Bin File"
,but again it give me error.
I tried all options of the V3.xxxxx and V5.xxxx of flash tools " download, upgrade, format all+download" but again no result.
After all this steps I tried to format the phone but the process of formatting goes to "100%" but and at the end does not appear the complete
dialog box.
Even I tried short the colo to Gnd but this also didn't help.At least I want to return the phone to its first condition and I tried to flash the first backup of the phone but, again no result.

Is there any solution for this problem.
I would appreciate if any one could help me whit this.

The following pictures are the errors which gave me while I flashed the backup:













Info by Miracle:

Waiting for USB Port...
  Set MediaTek PreLoader USB VCOM Port (COM9)
  Please Hold "ON" to connect with the phone...
  Connected to Phone.
  CPU: MT6572 SW:0000 Ver: CA01
  Downloading Boot11 ...
  EMMC Size: 0x00EC000000
  Flash Type: EMMC
  INT/EXT RAM  Size: 0x0+0x0
  Reading infr(EMMC)...
  id:ALPS.KK1.MP7.V1.7
  version:4.4.2
  model:G4
  brand:G4
  manufacturer:G4
  PRELOADER  BaseAddr:0x0  Size:0xC00000
  MBR  BaseAddr:0xC00000  Size:0x80000
  EBR1  BaseAddr:0xC80000  Size:0x80000
  PRO_INFO  BaseAddr:0xD00000  Size:0x300000
  NVRAM  BaseAddr:0x1000000  Size:0x500000
  PROTECT_F  BaseAddr:0x1500000  Size:0xA00000
  PROTECT_S  BaseAddr:0x1F00000  Size:0xA00000
  SECCFG  BaseAddr:0x2900000  Size:0x20000
  UBOOT  BaseAddr:0x2920000  Size:0x60000
  BOOTIMG  BaseAddr:0x2980000  Size:0x600000
  RECOVERY  BaseAddr:0x2F80000  Size:0x600000
  SEC_RO  BaseAddr:0x3580000  Size:0x40000
  MISC  BaseAddr:0x35C0000  Size:0x80000
  LOGO  BaseAddr:0x3640000  Size:0x300000
  EXPDB  BaseAddr:0x3940000  Size:0xA00000
  ANDROID  BaseAddr:0x4340000  Size:0x36000000
  CACHE  BaseAddr:0x3A340000  Size:0xE200000
  USRDATA  BaseAddr:0x48540000  Size:0x40000000
  FAT  BaseAddr:0x88540000  Size:0x62BC0000
  BMTPOOL  BaseAddr:0xFFFF0000  Size:0x1500000
  BaseAddr:0x0  Size:0x0
  Done.

[salah fanta]

And I also want her to her grandmother sent me a link please

[M - Soft]

Try This LG - H815T MT6572 - GEM_FLASH_MOHAMED? - Download - 4shared - mohamed 000
BY MOHAMED™

-----------------
B.R
M - Soft

[parvizhamidi]

Thanks for responding. I'm also tried with this firmware but , without any result.

Sent from my VS980 4G using Tapatalk

[M - Soft]

do you have Infinity-Box Chinese Miracle-2

[parvizhamidi]

No, I have Miracle and Volcano box.

Sent from my VS980 4G using Tapatalk

[M - Soft]

Try using such a solution after Done Try Write Flash Good Job

[memon AAsif]

gsm aladdin do not connect any mtk device driver also installed but still problem otherwise spd and sumsung doing work well only mtk problem

[M - Soft]

Originally Posted by memon AAsif

gsm aladdin do not connect any mtk device driver also installed but still problem otherwise spd and sumsung doing work well only mtk problem

Use Miracle Box And Select The Appropriate Boot

[parvizhamidi]

Hi,

I tried to write preloader with boot 8th and 11th but, without any result.

[M - Soft]

Try For This :
A. Download Sp-flash-tool-v3-1328
.


4.

Beginning Address to 0x800
Container Length to “0x1B0EC

.

Please wait until the advent of Ok

[parvizhamidi]

Hi, I flashed preloader succesfully but, when I tried full flash then the Flashtool again gave me an error.

[M - Soft]

skip Preloader or use boxes in flashing

[parvizhamidi]

Hi,
I tried to flash without prealoder but, flashtools and all boxes gave me an error.
Boxes Just flash MBR partition and other partitions gave me an error.

[M - Soft]

problem hard ware .