Need Help W880i Unlock Cid52 error with setool

[.::Gsm Killer::.]

When request send

SERVER SUPPORT ENABLED.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35777401667524 CERT:RED
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Executing CSCA-based unlock.
Asking for EROM signature...
Waiting for calculation process...
signature response "3577740166xxxx ADDED TO QUEUE,CHECK BACK LATER" (1)
Error "3577740166xxxx ADDED TO QUEUE,CHECK BACK LATER" during signature calculation
signoff ok
signature calculation not done,err: 144
Elapsed:9 secs.

when connect for unlock

SERVER SUPPORT ENABLED.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:3577740166xxxx CERT:RED
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader not responding, changing baudrate..
CSloader not responding at all,sorry..
Elapsed:32 secs.

Now its that when press unlock

SERVER SUPPORT ENABLED.
ChipID:9900,EMP protocol:0301
OLD EROM, OVERRIDING COLOR
OLD EROM, OVERRIDING CID
error while reading security units
SECURITY UNITS CAN'T BE READ !
DAMAGED FIRMWARE/GDFS OR EMPTY PHONE
phone pre-boot failed,possible RECOVERY needed.
Elapsed:10 secs.

I make recovery flash but still the third error

waiting for your responce

With New Version of setool checked

Now with new version that error

v0.914009/UNI
Card serial:0000xxxxxx
Loaded 51 flash descriptors
SERVER SUPPORT ENABLED.
SERVER CREDITS LEFT/USED: 4/26
CARD COUNTERS: FLASH 364, UNLOCK 457
Elapsed:4 secs.
SERVER SUPPORT ENABLED.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:3577740166xxxx CERT:RED
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Executing CSCA-based unlock.
Asking for EROM signature...
Waiting for calculation process...
RESPONSE: "SUCCESS" (1038)
loader startup: executed
Can't get packet properties.
wrong response, break.
failed, that is fatal
Fail

After that unlock again same error

SERVER SUPPORT ENABLED.
ChipID:9900,EMP protocol:0301
OLD EROM, OVERRIDING COLOR
OLD EROM, OVERRIDING CID
error while reading security units
SECURITY UNITS CAN'T BE READ !
DAMAGED FIRMWARE/GDFS OR EMPTY PHONE
phone pre-boot failed,possible RECOVERY needed.
Elapsed:4 secs.

[.::Gsm Killer::.]

Problem solved
After
Doing Hard on that Set

[kushstha]

Originally Posted by ::MobilePoint::

Problem solved
After
Doing Hard on that Set

What do u mean by DOING HARD?
Can u clearly explain this please?

[vedha]

while using cruiser with dcu60 cable press c button and plug the cable but set was powered on how to do this

[GSM-LINKS]

attach cable using press 2+5 both simple.