k800i testpoint embedded flashloader not responds - GSM-Forum

Andriey · 02-09-2009, 18:50

how can tell me whats wrong i do...here is my log from tp procedure

2009-02-09 15:50:35 Open COM port OK
2009-02-09 15:50:36 Elapsed: 6 secs.
2009-02-09 15:50:38 TESTPOINT REPAIR STAGE #1 STARTED
2009-02-09 15:50:38 ATTACH TESTPOINT NOW, THEN PRESS "READY"
2009-02-09 15:51:25 Open COM port OK
2009-02-09 15:52:27 ChipID:9900,EMP protocol:0301
2009-02-09 15:52:27 Speed:921600
2009-02-09 15:52:28 OTP: LOCKED:1 CID:49 PAF:1 IMEI:35399601348754 CERT:N/A
2009-02-09 15:52:28 FLASH CID:53 COLOR:RED
2009-02-09 15:52:29 LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
2009-02-09 15:52:29 PREPARING...
2009-02-09 15:52:37 ATTACH TP #1 AND PRESS "READY"
2009-02-09 15:52:55 RELEASE TP #1 AND PRESS "READY"
2009-02-09 15:53:00 TP #1 LOOKS OKAY
2009-02-09 15:53:09 DONE
2009-02-09 15:53:10 Elapsed: 151 secs.
2009-02-09 16:07:09 TESTPOINT REPAIR STAGE #2 STARTED
2009-02-09 16:07:09 Open COM port OK
2009-02-09 16:07:10 ChipID:9900,EMP protocol:0301
2009-02-09 16:07:10 Speed:921600
2009-02-09 16:07:11 ATTACH TP #2 AND PRESS "READY"
2009-02-09 16:07:28 Trying to launch embedded bootloader...
2009-02-09 16:07:58 PROCEDURE WAS STOPPED BY USER
2009-02-09 16:07:58 TP #2 INCORRECT OR STAGE #1 NOT EXECUTED
2009-02-09 16:07:58 Elapsed: 48 secs.
2009-02-09 16:08:07 TESTPOINT REPAIR STAGE #2 STARTED
2009-02-09 16:08:07 Open COM port OK
2009-02-09 16:08:07 ChipID:9900,EMP protocol:0301
2009-02-09 16:08:07 Speed:921600
2009-02-09 16:08:08 ATTACH TP #2 AND PRESS "READY"
2009-02-09 16:19:27 Trying to launch embedded bootloader...
2009-02-09 16:19:33 PROCEDURE WAS STOPPED BY USER
2009-02-09 16:19:33 TP #2 INCORRECT OR STAGE #1 NOT EXECUTED
2009-02-09 16:19:33 Elapsed: 686 secs.
2009-02-09 16:19:35 TESTPOINT REPAIR STAGE #2 STARTED
2009-02-09 16:19:35 Open COM port OK
2009-02-09 16:19:35 ChipID:9900,EMP protocol:0301
2009-02-09 16:19:35 Speed:921600
2009-02-09 16:19:36 ATTACH TP #2 AND PRESS "READY"
2009-02-09 16:21:42 Trying to launch embedded bootloader...
2009-02-09 16:21:50 PROCEDURE WAS STOPPED BY USER
2009-02-09 16:21:50 TP #2 INCORRECT OR STAGE #1 NOT EXECUTED
2009-02-09 16:21:51 Elapsed: 135 secs.
2009-02-09 18:37:58 TESTPOINT REPAIR STAGE #1 STARTED
2009-02-09 18:37:58 Open COM port OK
2009-02-09 18:38:10 ChipID:9900,EMP protocol:0301
2009-02-09 18:38:10 Speed:921600
2009-02-09 18:38:11 Elapsed: 13 secs.
2009-02-09 18:38:15 TESTPOINT REPAIR STAGE #1 STARTED
2009-02-09 18:38:15 Open COM port OK
2009-02-09 18:38:15 ChipID:9900,EMP protocol:0301
2009-02-09 18:38:15 Speed:921600
2009-02-09 18:38:17 Elapsed: 1 secs.
2009-02-09 18:38:19 TESTPOINT REPAIR STAGE #2 STARTED
2009-02-09 18:38:19 Open COM port OK
2009-02-09 18:38:19 ChipID:9900,EMP protocol:0301
2009-02-09 18:38:19 Speed:921600
2009-02-09 18:38:20 ATTACH TP #2 AND PRESS "READY"
2009-02-09 18:39:00 Trying to launch embedded bootloader...
2009-02-09 18:39:00 TP #2 LOOKS OKAY
2009-02-09 18:39:00 RELEASE TP #2 AND PRESS "READY"
2009-02-09 18:39:07 embedded bootloader not responds !
2009-02-09 18:39:08 Elapsed: 49 secs.
2009-02-09 18:39:48 TESTPOINT REPAIR STAGE #2 STARTED
2009-02-09 18:39:48 Open COM port OK
2009-02-09 18:39:49 ChipID:9900,EMP protocol:0301
2009-02-09 18:39:49 Speed:921600
2009-02-09 18:39:50 ATTACH TP #2 AND PRESS "READY"
2009-02-09 18:40:24 Trying to launch embedded bootloader...
2009-02-09 18:40:24 TP #2 LOOKS OKAY
2009-02-09 18:40:24 RELEASE TP #2 AND PRESS "READY"
2009-02-09 18:41:09 embedded flashloader not responds !
2009-02-09 18:41:09 Elapsed: 81 secs.

zeeshankhan · 02-09-2009, 19:33

bro same problem here.any body have solution please reply us

Andriey · 02-09-2009, 21:56

someone tellz me i used wrong tp for my flash ic

Jr Telecom · 02-09-2009, 22:05

Sometimes wrong tp can be happen!
Although try again from stage 1 > 2 and make sure tp minimum 95% connected.

Andriey · 02-09-2009, 23:02

my friend. all testpoint are the same for k800i?? or they are dependent from flash ic model??

s this chip number?

5060 MOYOBO
5636A880
Z636I113B
MC 04

tanks

kodan · 02-09-2009, 23:29

repeat stage 2 only

Andriey · 02-10-2009, 00:21

v0.915032/UNI
CARD SERIAL: 0008XXXX
Loaded 51 flash descriptors
TESTPOINT REPAIR STAGE #1 STARTED
PROCEDURE WAS STOPPED BY USER
Elapsed: 3 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Elapsed: 31 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
PROCEDURE WAS STOPPED BY USER
Trying to launch embedded bootloader...
TP #2 INCORRECT OR STAGE #1 NOT EXECUTED
Elapsed: 195 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Elapsed: 3 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
TP #2 LOOKS OKAY
RELEASE TP #2 AND PRESS "READY"
embedded bootloader not responds !
Elapsed: 301 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Elapsed: 13 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Elapsed: 2 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
PROCEDURE WAS STOPPED BY USER
Trying to launch embedded bootloader...
TP #2 INCORRECT OR STAGE #1 NOT EXECUTED
Elapsed: 5 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:115200
Elapsed: 6 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:115200
ATTACH TP #2 AND PRESS "READY"
PROCEDURE WAS STOPPED BY USER
Trying to launch embedded bootloader...
TP #2 INCORRECT OR STAGE #1 NOT EXECUTED
Elapsed: 32 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:115200
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
PROCEDURE WAS STOPPED BY USER
TP #2 INCORRECT OR STAGE #1 NOT EXECUTED
Elapsed: 67 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:115200
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
PROCEDURE WAS STOPPED BY USER
TP #2 INCORRECT OR STAGE #1 NOT EXECUTED
Elapsed: 83 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:115200
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
PROCEDURE WAS STOPPED BY USER
TP #2 INCORRECT OR STAGE #1 NOT EXECUTED
Elapsed: 55 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Elapsed: 6 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
TP #2 LOOKS OKAY
RELEASE TP #2 AND PRESS "READY"
embedded bootloader not responds !
Elapsed: 45 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Elapsed: 6 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Elapsed: 1 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
TP #2 LOOKS OKAY
RELEASE TP #2 AND PRESS "READY"
embedded flashloader not responds !
Elapsed: 111 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Elapsed: 8 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
TP #2 LOOKS OKAY
RELEASE TP #2 AND PRESS "READY"
PROCEDURE WAS STOPPED BY USER
embedded flashloader not responds !
Elapsed: 208 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Elapsed: 1 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
TP #2 LOOKS OKAY
RELEASE TP #2 AND PRESS "READY"
embedded bootloader not responds !
Elapsed: 42 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
TP #2 LOOKS OKAY
RELEASE TP #2 AND PRESS "READY"
embedded bootloader not responds !
Elapsed: 40 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Elapsed: 11 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
PROCEDURE WAS STOPPED BY USER
TP #2 INCORRECT OR STAGE #1 NOT EXECUTED
Elapsed: 37 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
TP #2 LOOKS OKAY
RELEASE TP #2 AND PRESS "READY"
PROCEDURE WAS STOPPED BY USER
embedded flashloader not responds !
Elapsed: 76 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
TP #2 LOOKS OKAY
RELEASE TP #2 AND PRESS "READY"
PROCEDURE WAS STOPPED BY USER
embedded flashloader not responds !
Elapsed: 46 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
TP #2 LOOKS OKAY
RELEASE TP #2 AND PRESS "READY"
embedded bootloader not responds !
Elapsed: 32 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
TP #2 LOOKS OKAY
RELEASE TP #2 AND PRESS "READY"
embedded flashloader not responds !
Elapsed: 86 secs.

still the same prob...
i dont have any ideas...
maybe this is HW problem??
i dont know...

02-09-2009, 18:50	#1 (permalink)
Andriey Freak Poster Join Date: Jan 2009 Posts: 219 Member: 952457 Status: Offline Sonork: 1000.9080 Thanks Meter: 34	k800i testpoint embedded flashloader not responds how can tell me whats wrong i do...here is my log from tp procedure 2009-02-09 15:50:35 Open COM port OK 2009-02-09 15:50:36 Elapsed: 6 secs. 2009-02-09 15:50:38 TESTPOINT REPAIR STAGE #1 STARTED 2009-02-09 15:50:38 ATTACH TESTPOINT NOW, THEN PRESS "READY" 2009-02-09 15:51:25 Open COM port OK 2009-02-09 15:52:27 ChipID:9900,EMP protocol:0301 2009-02-09 15:52:27 Speed:921600 2009-02-09 15:52:28 OTP: LOCKED:1 CID:49 PAF:1 IMEI:35399601348754 CERT:N/A 2009-02-09 15:52:28 FLASH CID:53 COLOR:RED 2009-02-09 15:52:29 LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015 2009-02-09 15:52:29 PREPARING... 2009-02-09 15:52:37 ATTACH TP #1 AND PRESS "READY" 2009-02-09 15:52:55 RELEASE TP #1 AND PRESS "READY" 2009-02-09 15:53:00 TP #1 LOOKS OKAY 2009-02-09 15:53:09 DONE 2009-02-09 15:53:10 Elapsed: 151 secs. 2009-02-09 16:07:09 TESTPOINT REPAIR STAGE #2 STARTED 2009-02-09 16:07:09 Open COM port OK 2009-02-09 16:07:10 ChipID:9900,EMP protocol:0301 2009-02-09 16:07:10 Speed:921600 2009-02-09 16:07:11 ATTACH TP #2 AND PRESS "READY" 2009-02-09 16:07:28 Trying to launch embedded bootloader... 2009-02-09 16:07:58 PROCEDURE WAS STOPPED BY USER 2009-02-09 16:07:58 TP #2 INCORRECT OR STAGE #1 NOT EXECUTED 2009-02-09 16:07:58 Elapsed: 48 secs. 2009-02-09 16:08:07 TESTPOINT REPAIR STAGE #2 STARTED 2009-02-09 16:08:07 Open COM port OK 2009-02-09 16:08:07 ChipID:9900,EMP protocol:0301 2009-02-09 16:08:07 Speed:921600 2009-02-09 16:08:08 ATTACH TP #2 AND PRESS "READY" 2009-02-09 16:19:27 Trying to launch embedded bootloader... 2009-02-09 16:19:33 PROCEDURE WAS STOPPED BY USER 2009-02-09 16:19:33 TP #2 INCORRECT OR STAGE #1 NOT EXECUTED 2009-02-09 16:19:33 Elapsed: 686 secs. 2009-02-09 16:19:35 TESTPOINT REPAIR STAGE #2 STARTED 2009-02-09 16:19:35 Open COM port OK 2009-02-09 16:19:35 ChipID:9900,EMP protocol:0301 2009-02-09 16:19:35 Speed:921600 2009-02-09 16:19:36 ATTACH TP #2 AND PRESS "READY" 2009-02-09 16:21:42 Trying to launch embedded bootloader... 2009-02-09 16:21:50 PROCEDURE WAS STOPPED BY USER 2009-02-09 16:21:50 TP #2 INCORRECT OR STAGE #1 NOT EXECUTED 2009-02-09 16:21:51 Elapsed: 135 secs. 2009-02-09 18:37:58 TESTPOINT REPAIR STAGE #1 STARTED 2009-02-09 18:37:58 Open COM port OK 2009-02-09 18:38:10 ChipID:9900,EMP protocol:0301 2009-02-09 18:38:10 Speed:921600 2009-02-09 18:38:11 Elapsed: 13 secs. 2009-02-09 18:38:15 TESTPOINT REPAIR STAGE #1 STARTED 2009-02-09 18:38:15 Open COM port OK 2009-02-09 18:38:15 ChipID:9900,EMP protocol:0301 2009-02-09 18:38:15 Speed:921600 2009-02-09 18:38:17 Elapsed: 1 secs. 2009-02-09 18:38:19 TESTPOINT REPAIR STAGE #2 STARTED 2009-02-09 18:38:19 Open COM port OK 2009-02-09 18:38:19 ChipID:9900,EMP protocol:0301 2009-02-09 18:38:19 Speed:921600 2009-02-09 18:38:20 ATTACH TP #2 AND PRESS "READY" 2009-02-09 18:39:00 Trying to launch embedded bootloader... 2009-02-09 18:39:00 TP #2 LOOKS OKAY 2009-02-09 18:39:00 RELEASE TP #2 AND PRESS "READY" 2009-02-09 18:39:07 embedded bootloader not responds ! 2009-02-09 18:39:08 Elapsed: 49 secs. 2009-02-09 18:39:48 TESTPOINT REPAIR STAGE #2 STARTED 2009-02-09 18:39:48 Open COM port OK 2009-02-09 18:39:49 ChipID:9900,EMP protocol:0301 2009-02-09 18:39:49 Speed:921600 2009-02-09 18:39:50 ATTACH TP #2 AND PRESS "READY" 2009-02-09 18:40:24 Trying to launch embedded bootloader... 2009-02-09 18:40:24 TP #2 LOOKS OKAY 2009-02-09 18:40:24 RELEASE TP #2 AND PRESS "READY" 2009-02-09 18:41:09 embedded flashloader not responds ! 2009-02-09 18:41:09 Elapsed: 81 secs.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
k800 embedded flashloader not responds !	hackgsm	SETool2	1	10-04-2008 16:29
W880i - embedded flashloader not responds !	eduardo000	SETool2	2	08-29-2008 09:05
K800i embedded flashloader not responds !	kamransohail786	SETool2	5	08-22-2008 08:34
k550im embedded flashloader not responds !	leader_gsm	SETool2	4	08-06-2008 23:50
Help me !Embedded Flashloader Not Responds	vnsun	Sony Ericsson	0	12-24-2007 03:50

02-09-2009, 19:33	#2 (permalink)
zeeshankhan Insane Poster Join Date: Feb 2006 Location: pakistan Posts: 81 Member: 230357 Status: Offline Thanks Meter: 18	bro same problem here.any body have solution please reply us

02-09-2009, 21:56	#3 (permalink)
Andriey Freak Poster Join Date: Jan 2009 Posts: 219 Member: 952457 Status: Offline Sonork: 1000.9080 Thanks Meter: 34	someone tellz me i used wrong tp for my flash ic

02-09-2009, 22:05	#4 (permalink)
Jr Telecom No Life Poster Join Date: Dec 2006 Location: Jr Telecom™ Posts: 1,735 Member: 409725 Status: Offline Sonork: 100.1581478 Thanks Meter: 797	Sometimes wrong tp can be happen! Although try again from stage 1 > 2 and make sure tp minimum 95% connected.

02-09-2009, 23:02	#5 (permalink)
Andriey Freak Poster Join Date: Jan 2009 Posts: 219 Member: 952457 Status: Offline Sonork: 1000.9080 Thanks Meter: 34	my friend. all testpoint are the same for k800i?? or they are dependent from flash ic model?? s this chip number? 5060 MOYOBO 5636A880 Z636I113B MC 04 tanks

02-09-2009, 23:29	#6 (permalink)
kodan Freak Poster Join Date: Oct 2004 Location: zanzibar Age: 53 Posts: 280 Member: 84774 Status: Offline Thanks Meter: 11	repeat stage 2 only

02-10-2009, 00:21	#7 (permalink)
Andriey Freak Poster Join Date: Jan 2009 Posts: 219 Member: 952457 Status: Offline Sonork: 1000.9080 Thanks Meter: 34	v0.915032/UNI CARD SERIAL: 0008XXXX Loaded 51 flash descriptors TESTPOINT REPAIR STAGE #1 STARTED PROCEDURE WAS STOPPED BY USER Elapsed: 3 secs. TESTPOINT REPAIR STAGE #1 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 Elapsed: 31 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 ATTACH TP #2 AND PRESS "READY" PROCEDURE WAS STOPPED BY USER Trying to launch embedded bootloader... TP #2 INCORRECT OR STAGE #1 NOT EXECUTED Elapsed: 195 secs. TESTPOINT REPAIR STAGE #1 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 Elapsed: 3 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 ATTACH TP #2 AND PRESS "READY" Trying to launch embedded bootloader... TP #2 LOOKS OKAY RELEASE TP #2 AND PRESS "READY" embedded bootloader not responds ! Elapsed: 301 secs. TESTPOINT REPAIR STAGE #1 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 Elapsed: 13 secs. TESTPOINT REPAIR STAGE #1 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 Elapsed: 2 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 ATTACH TP #2 AND PRESS "READY" PROCEDURE WAS STOPPED BY USER Trying to launch embedded bootloader... TP #2 INCORRECT OR STAGE #1 NOT EXECUTED Elapsed: 5 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:115200 Elapsed: 6 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:115200 ATTACH TP #2 AND PRESS "READY" PROCEDURE WAS STOPPED BY USER Trying to launch embedded bootloader... TP #2 INCORRECT OR STAGE #1 NOT EXECUTED Elapsed: 32 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:115200 ATTACH TP #2 AND PRESS "READY" Trying to launch embedded bootloader... PROCEDURE WAS STOPPED BY USER TP #2 INCORRECT OR STAGE #1 NOT EXECUTED Elapsed: 67 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:115200 ATTACH TP #2 AND PRESS "READY" Trying to launch embedded bootloader... PROCEDURE WAS STOPPED BY USER TP #2 INCORRECT OR STAGE #1 NOT EXECUTED Elapsed: 83 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:115200 ATTACH TP #2 AND PRESS "READY" Trying to launch embedded bootloader... PROCEDURE WAS STOPPED BY USER TP #2 INCORRECT OR STAGE #1 NOT EXECUTED Elapsed: 55 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 Elapsed: 6 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 ATTACH TP #2 AND PRESS "READY" Trying to launch embedded bootloader... TP #2 LOOKS OKAY RELEASE TP #2 AND PRESS "READY" embedded bootloader not responds ! Elapsed: 45 secs. TESTPOINT REPAIR STAGE #1 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 Elapsed: 6 secs. TESTPOINT REPAIR STAGE #1 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 Elapsed: 1 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 ATTACH TP #2 AND PRESS "READY" Trying to launch embedded bootloader... TP #2 LOOKS OKAY RELEASE TP #2 AND PRESS "READY" embedded flashloader not responds ! Elapsed: 111 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 Elapsed: 8 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 ATTACH TP #2 AND PRESS "READY" Trying to launch embedded bootloader... TP #2 LOOKS OKAY RELEASE TP #2 AND PRESS "READY" PROCEDURE WAS STOPPED BY USER embedded flashloader not responds ! Elapsed: 208 secs. TESTPOINT REPAIR STAGE #1 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 Elapsed: 1 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 ATTACH TP #2 AND PRESS "READY" Trying to launch embedded bootloader... TP #2 LOOKS OKAY RELEASE TP #2 AND PRESS "READY" embedded bootloader not responds ! Elapsed: 42 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 ATTACH TP #2 AND PRESS "READY" Trying to launch embedded bootloader... TP #2 LOOKS OKAY RELEASE TP #2 AND PRESS "READY" embedded bootloader not responds ! Elapsed: 40 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 Elapsed: 11 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 ATTACH TP #2 AND PRESS "READY" Trying to launch embedded bootloader... PROCEDURE WAS STOPPED BY USER TP #2 INCORRECT OR STAGE #1 NOT EXECUTED Elapsed: 37 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 ATTACH TP #2 AND PRESS "READY" Trying to launch embedded bootloader... TP #2 LOOKS OKAY RELEASE TP #2 AND PRESS "READY" PROCEDURE WAS STOPPED BY USER embedded flashloader not responds ! Elapsed: 76 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 ATTACH TP #2 AND PRESS "READY" Trying to launch embedded bootloader... TP #2 LOOKS OKAY RELEASE TP #2 AND PRESS "READY" PROCEDURE WAS STOPPED BY USER embedded flashloader not responds ! Elapsed: 46 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 ATTACH TP #2 AND PRESS "READY" Trying to launch embedded bootloader... TP #2 LOOKS OKAY RELEASE TP #2 AND PRESS "READY" embedded bootloader not responds ! Elapsed: 32 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 ATTACH TP #2 AND PRESS "READY" Trying to launch embedded bootloader... TP #2 LOOKS OKAY RELEASE TP #2 AND PRESS "READY" embedded flashloader not responds ! Elapsed: 86 secs. still the same prob... i dont have any ideas... maybe this is HW problem?? i dont know...