bb 8100. flash problems... - GSM-Forum

breakfruit · 02-12-2010, 09:20

Greetings,
I have a problem with flash-process of bb 8100.

1st of all some history:
Tryed to turn on the device - it's blinks 1 time with red lite, than display goes down like the brightness is very low... BUT device is connected to PC and it seems like it aknowledged by OS...

I have unlock it with MFI and now "Factory OS <no aplication linked>"

Now, im tryin' to flash it with BB Destop manager and there is an error "Could not connect to device while multilevel installation" (rus eng. Sorry, i think i've translated it correctly =) ). Also tryed to install flash with AppLoader - the same error.

Ane ideas about that?

theripboy · 02-12-2010, 17:24

Did you try with another usb cable and another usb port?

majoralex · 02-12-2010, 19:49

connect the phone without battery

C:\Program Files\Common Files\Research In Motion\AppLoader\Loader.exe

choose what to install
insert battery and press "next"

wait for the installation of about 30 minutes

breakfruit · 02-12-2010, 19:58

Quote:

Originally Posted by majoralex

connect the phone without battery

C:\Program Files\Common Files\Research In Motion\AppLoader\Loader.exe

choose what to install
insert battery and press "next"

wait for the installation of about 30 minutes

thx mate, i'll try this

will post here after that..

breakfruit · 02-12-2010, 22:44

nope.. couldn't connect to device...

delower10 · 02-13-2010, 13:36

Quote:

Originally Posted by breakfruit

nope.. couldn't connect to device...

If u have yahoo IM contact me for batter understand

liferocks · 02-13-2010, 14:11

during multiload (multilevel installation) operation release BB OS by typing S-T-A-R-T thats all you need to do then it will continue

delower10 · 02-15-2010, 00:21

Quote:

Originally Posted by breakfruit

nope.. couldn't connect to device...

try with "bb storage activation new"

That fixed the usb vs. Desktop Manager problem for me

breakfruit · 02-15-2010, 07:12

ok. Will try it later... post here after

majoralex · 02-15-2010, 08:34

check system connector

breakfruit · 02-15-2010, 08:45

Quote:

Originally Posted by majoralex

check system connector

if you mean PC USB-hub - it's normal... couse othe devices work fine..

breakfruit · 02-15-2010, 18:56

Quote:

Originally Posted by delower10

try with "bb storage activation new"

That fixed the usb vs. Desktop Manager problem for me

well... what can i say.. the problem is still presist..

Is it normal that this utility is working by the circle?

gitamilana · 02-15-2010, 19:08

Quote:

Originally Posted by breakfruit

Greetings,
I have a problem with flash-process of bb 8100.

1st of all some history:
Tryed to turn on the device - it's blinks 1 time with red lite, than display goes down like the brightness is very low... BUT device is connected to PC and it seems like it aknowledged by OS...

I have unlock it with MFI and now "Factory OS <no aplication linked>"

Now, im tryin' to flash it with BB Destop manager and there is an error "Could not connect to device while multilevel installation" (rus eng. Sorry, i think i've translated it correctly =) ). Also tryed to install flash with AppLoader - the same error.

Ane ideas about that?

which os and firmware you are used? try downgrade the os and firmware to 4.2 or 4.3

breakfruit · 02-16-2010, 06:58

Quote:

Originally Posted by gitamilana

which os and firmware you are used? try downgrade the os and firmware to 4.2 or 4.3

OS Win XP SP3

as far as i know MML works only with 4.5.xxx or not?

gitamilana · 02-19-2010, 18:22

Quote:

Originally Posted by breakfruit

OS Win XP SP3

as far as i know MML works only with 4.5.xxx or not?

it doesn`t matter just use 4.2 or 4.3 after unlock complete

02-12-2010, 09:20	#1 (permalink)
breakfruit Freak Poster Join Date: Nov 2009 Location: RU - Saint-Petersburg Posts: 252 Member: 1170297 Status: Offline Sonork: \m/(-_o)\m/ Thanks Meter: 36	bb 8100. flash problems... Greetings, I have a problem with flash-process of bb 8100. 1st of all some history: Tryed to turn on the device - it's blinks 1 time with red lite, than display goes down like the brightness is very low... BUT device is connected to PC and it seems like it aknowledged by OS... I have unlock it with MFI and now "Factory OS <no aplication linked>" Now, im tryin' to flash it with BB Destop manager and there is an error "Could not connect to device while multilevel installation" (rus eng. Sorry, i think i've translated it correctly =) ). Also tryed to install flash with AppLoader - the same error. Ane ideas about that?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BB 8100 Flashing problem Help	Papsie	BlackBerry (RIM)	7	02-11-2010 10:58
BB 8100 Unlock Problem	Dodger	BlackBerry (RIM)	10	08-09-2009 12:39
BB 8100 flashing problem	asad_nomy7	BlackBerry (RIM)	1	08-05-2009 18:14
bb 8100 unlock problem	burraq	BlackBerry (RIM)	3	05-30-2009 15:13
bb 8100 unlocking problem	scorpion_bashee	BlackBerry (RIM)	2	03-29-2009 15:26

02-12-2010, 17:24	#2 (permalink)
theripboy Insane Poster Join Date: Sep 2007 Posts: 69 Member: 590338 Status: Offline Thanks Meter: 3	Did you try with another usb cable and another usb port?

02-12-2010, 19:49	#3 (permalink)
majoralex Crazy Poster Join Date: Feb 2010 Location: UA Kharkiv Posts: 20 Member: 1234671 Status: Offline Thanks Meter: 1	connect the phone without battery C:\Program Files\Common Files\Research In Motion\AppLoader\Loader.exe choose what to install insert battery and press "next" wait for the installation of about 30 minutes

02-12-2010, 22:44	#5 (permalink)
breakfruit Freak Poster Join Date: Nov 2009 Location: RU - Saint-Petersburg Posts: 252 Member: 1170297 Status: Offline Sonork: \m/(-_o)\m/ Thanks Meter: 36	nope.. couldn't connect to device...

02-13-2010, 14:11	#7 (permalink)
liferocks Freak Poster Join Date: Oct 2009 Posts: 140 Member: 1145724 Status: Offline Thanks Meter: 3	during multiload (multilevel installation) operation release BB OS by typing S-T-A-R-T thats all you need to do then it will continue

02-15-2010, 07:12	#9 (permalink)
breakfruit Freak Poster Join Date: Nov 2009 Location: RU - Saint-Petersburg Posts: 252 Member: 1170297 Status: Offline Sonork: \m/(-_o)\m/ Thanks Meter: 36	ok. Will try it later... post here after

02-15-2010, 08:34	#10 (permalink)
majoralex Crazy Poster Join Date: Feb 2010 Location: UA Kharkiv Posts: 20 Member: 1234671 Status: Offline Thanks Meter: 1	check system connector