oppo a3s cph1853 connection error aetool - GSM-Forum

Vicky Matharu · 07-31-2019, 05:17

hello aetool team

please guide me how to connet a3s cph 1853 with aetool
please give me the pinout diagram
are vccq and vcc pinouts required or not

Vicky Matharu · 07-31-2019, 06:43

is it supported in aetool or not

7ckngmad · 07-31-2019, 07:07

use only 4 line > GND , CMD ,DAT0 , CLK

and connect usb cable

Vicky Matharu · 07-31-2019, 07:22

>>>>Searching EMMC Devices....
MAE ToolSN 0626 TS37
>>>>Testing EMMC disk read status....
Reading EMMC Capacity Info...
Capacity Size:15634268160Byte/14910MB/14.91GB;(Hex:0x03A3E00000)
Wrong EMMC disk data; this may be an empty Flash IC!!!

DYNET · 07-31-2019, 07:30

Quote:

Originally Posted by vicky matharu

>>>>searching emmc devices....
Mae toolsn 0626 ts37
>>>>testing emmc disk read status....
Reading emmc capacity info...
Capacity size:15634268160byte/14910mb/14.91gb;(hex:0x03a3e00000)
wrong emmc disk data; this may be an empty flash ic!!!

connect gnd to ae tool short and strong wire

kothamamun · 07-31-2019, 07:31

connect vcc no need connect vccq off ae tool power switch connnet charger without battery ae tool red light and blu light will come just make wipe

oxygen10 · 07-31-2019, 07:33

i have same problem CPH1853

but CPH1803 easy to connect

Vicky Matharu · 07-31-2019, 07:52

Quote:

Originally Posted by DYNET

connect gnd to ae tool short and strong wire

i tried but not working

DYNET · 07-31-2019, 08:04

If you use poor wire then change it thicknesses need good

Vicky Matharu · 07-31-2019, 08:07

Quote:

Originally Posted by DYNET

If you use poor wire then change it thicknesses need good

i am using good thick wire

Vicky Matharu · 07-31-2019, 08:11

Quote:

Originally Posted by DYNET

If you use poor wire then change it thicknesses need good

i want to ask that do i need to solder vcc and vccq

07-31-2019, 05:17	#1 (permalink)
Vicky Matharu Freak Poster Join Date: Oct 2009 Location: KHANNA punjab Posts: 235 Member: 1137967 Status: Offline Thanks Meter: 34	oppo a3s cph1853 connection error aetool hello aetool team please guide me how to connet a3s cph 1853 with aetool please give me the pinout diagram are vccq and vcc pinouts required or not

07-31-2019, 06:43	#2 (permalink)
Vicky Matharu Freak Poster Join Date: Oct 2009 Location: KHANNA punjab Posts: 235 Member: 1137967 Status: Offline Thanks Meter: 34	is it supported in aetool or not

07-31-2019, 07:07	#3 (permalink)
7ckngmad Junior Member Join Date: Nov 2018 Posts: 2 Member: 2878108 Status: Offline Thanks Meter: 0	use only 4 line > GND , CMD ,DAT0 , CLK and connect usb cable

07-31-2019, 07:22	#4 (permalink)
Vicky Matharu Freak Poster Join Date: Oct 2009 Location: KHANNA punjab Posts: 235 Member: 1137967 Status: Offline Thanks Meter: 34	>>>>Searching EMMC Devices.... MAE ToolSN 0626 TS37 >>>>Testing EMMC disk read status.... Reading EMMC Capacity Info... Capacity Size:15634268160Byte/14910MB/14.91GB;(Hex:0x03A3E00000) Wrong EMMC disk data; this may be an empty Flash IC!!!

07-31-2019, 07:31	#6 (permalink)
kothamamun No Life Poster Join Date: Apr 2016 Location: B A N G L A D E S H Posts: 3,189 Member: 2556542 Status: Offline Thanks Meter: 1,790	connect vcc no need connect vccq off ae tool power switch connnet charger without battery ae tool red light and blu light will come just make wipe

07-31-2019, 07:33	#7 (permalink)
oxygen10 Freak Poster Join Date: Aug 2012 Location: Phillippines Posts: 114 Member: 1798740 Status: Offline Sonork: 1621776 Thanks Meter: 12	i have same problem CPH1853 but CPH1803 easy to connect

07-31-2019, 08:04	#9 (permalink)
DYNET No Life Poster Join Date: Jul 2006 Location: CHINA Age: 34 Posts: 2,735 Member: 320363 Status: Offline Sonork: 100.1578853 Thanks Meter: 3,938	If you use poor wire then change it thicknesses need good