Can not connect with tv100 spd sc6600r cpu - GSM-Forum

himanshu taldar · 10-03-2008, 13:40

help me cpf team , iam not able to work with SPD SC6600R CPU double sim phone....i found d+ and d_ but i cant found nboot pin....

gsmfans · 10-03-2008, 14:14

Hi bro pls tell me ur phone vcc gnd pin and cable type

B,R,.

gsmfans

himanshu taldar · 10-03-2008, 14:34

sir i am using one line 18 pin e113 cable..... the ground position is 1,5,10,12,13 and vcc 15,16,17 and pin 8 is d+ and 9 is d-

gsmfans · 10-03-2008, 14:52

Bro pls set the pinout try agin

E113[18P]A288 VCC 17 11 14 18 GND 1 13 5 10 D+8 D-9 OR set full pown of 1,5,10,12,13 and vcc 15,16,17 and pin 8 is d+ and 9 is d- good luck to u

B,R,.

gsmfans

himanshu taldar · 10-03-2008, 19:58

sir i already tried with this given pinouts but my phone connect as a usb mass storage device... it does not make sciusb2serial usb com port

gsmfans · 10-04-2008, 03:28

[18pin]Gnd_1_5_10_13 Vcc_17_18 D+_8 D-_9 11 to GND or full up

pls try it

B,R,.

gsmfans

sagtel · 10-05-2008, 20:03

Quote:

Originally Posted by himanshu taldar

sir i am using one line 18 pin e113 cable..... the ground position is 1,5,10,12,13 and vcc 15,16,17 and pin 8 is d+ and 9 is d-

Hello Bro,
try with E013 cable(18pin one line) and post your result here

Best Regards,
SagTel
www.gsmgujarat.com

himanshu taldar · 10-06-2008, 08:28

Quote:

Originally Posted by sagtel

Hello Bro,
try with E013 cable(18pin one line) and post your result here

Best Regards,
SagTel
www.gsmgujarat.com

now i can see sciusb2serial cable in ports in device manager.but just for 1 second....whenever i connect my phone the comport disappear again & device connected as mass storage

gsmfans · 10-06-2008, 09:06

pls try the pinout agin [18pin]Gnd_1_5_10_13_11 Vcc_17_18 D+_8 D-_9 Or Left set all full pown. all full up

B,R,.

gsmfans

himanshu taldar · 10-06-2008, 14:06

still having same problem with sciusb2serial comport........tried both e113,e013 cables

gsmfans · 10-06-2008, 15:52

bro pls change 11pin to VCC try agin or contact my msn [email protected]

B,R,.

gsmfans

mentari · 10-07-2008, 09:09

All pinout posted by gsmfans with pin 11 as boot pin is correct.

use E113 cable. set pin 11 to gnd .(usually is this.)

if not work set pin 11 to vcc.

himanshu taldar · 10-07-2008, 12:42

Quote:

Originally Posted by gsmfans

bro pls change 11pin to VCC try agin or contact my msn [email protected]

B,R,.

gsmfans

thanksa lot sir, your online support trough team viewer was extremely admirable...thanks again

MED9 · 02-16-2009, 14:02

i have same probleme freind i need help pls

noure30 · 04-19-2009, 15:40

help me a can't connect this phone 18 pin tv100 double sim and carte memoré
plaese pinout for the is phone.........................thanks

10-03-2008, 13:40	#1 (permalink)
himanshu taldar No Life Poster Join Date: Jan 2007 Location: udaipur, I N D I A Age: 37 Posts: 2,346 Member: 422762 Status: Offline Sonork: 100.1593904 Thanks Meter: 973	Can not connect with tv100 spd sc6600r cpu help me cpf team , iam not able to work with SPD SC6600R CPU double sim phone....i found d+ and d_ but i cant found nboot pin....

10-04-2008, 03:28	#6 (permalink)
gsmfans Freak Poster Join Date: Oct 2007 Location: phones-china 中国 Posts: 454 Member: 612230 Status: Offline Thanks Meter: 330	[18pin]Gnd_1_5_10_13 Vcc_17_18 D+_8 D-_9 11 to GND or full up pls try it B,R,. gsmfans Last edited by gsmfans; 10-04-2008 at 03:40.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
KU990 dead after flash, Only LG logo & Can not connect with box!!	Wais777	VygisToolbox	10	07-07-2009 23:59
W380 can not connect with rj45 and dcu-60.	nabhan9	Sony Ericsson Hardware Repair	0	04-20-2009 00:43
W380 can not connect with rj45 and dcu-60	jiang0736	Sony Ericsson Hardware Repair	2	09-25-2008 04:04
P900 can not connect with cruiser v4.10	lianghx	Cruiser Suite	7	04-09-2007 15:12
strange ... siemens S40 can not connect with XTND	dsimka	x1x to x45/x50	0	12-02-2002 18:59

10-03-2008, 14:14	#2 (permalink)
gsmfans Freak Poster Join Date: Oct 2007 Location: phones-china 中国 Posts: 454 Member: 612230 Status: Offline Thanks Meter: 330	Hi bro pls tell me ur phone vcc gnd pin and cable type B,R,. gsmfans

10-03-2008, 14:34	#3 (permalink)
himanshu taldar No Life Poster Join Date: Jan 2007 Location: udaipur, I N D I A Age: 37 Posts: 2,346 Member: 422762 Status: Offline Sonork: 100.1593904 Thanks Meter: 973	sir i am using one line 18 pin e113 cable..... the ground position is 1,5,10,12,13 and vcc 15,16,17 and pin 8 is d+ and 9 is d-

10-03-2008, 14:52	#4 (permalink)
gsmfans Freak Poster Join Date: Oct 2007 Location: phones-china 中国 Posts: 454 Member: 612230 Status: Offline Thanks Meter: 330	Bro pls set the pinout try agin E113[18P]A288 VCC 17 11 14 18 GND 1 13 5 10 D+8 D-9 OR set full pown of 1,5,10,12,13 and vcc 15,16,17 and pin 8 is d+ and 9 is d- good luck to u B,R,. gsmfans

10-03-2008, 19:58	#5 (permalink)
himanshu taldar No Life Poster Join Date: Jan 2007 Location: udaipur, I N D I A Age: 37 Posts: 2,346 Member: 422762 Status: Offline Sonork: 100.1593904 Thanks Meter: 973	sir i already tried with this given pinouts but my phone connect as a usb mass storage device... it does not make sciusb2serial usb com port

10-06-2008, 09:06	#9 (permalink)
gsmfans Freak Poster Join Date: Oct 2007 Location: phones-china 中国 Posts: 454 Member: 612230 Status: Offline Thanks Meter: 330	pls try the pinout agin [18pin]Gnd_1_5_10_13_11 Vcc_17_18 D+_8 D-_9 Or Left set all full pown. all full up B,R,. gsmfans

10-06-2008, 14:06	#10 (permalink)
himanshu taldar No Life Poster Join Date: Jan 2007 Location: udaipur, I N D I A Age: 37 Posts: 2,346 Member: 422762 Status: Offline Sonork: 100.1593904 Thanks Meter: 973	still having same problem with sciusb2serial comport........tried both e113,e013 cables

10-06-2008, 15:52	#11 (permalink)
gsmfans Freak Poster Join Date: Oct 2007 Location: phones-china 中国 Posts: 454 Member: 612230 Status: Offline Thanks Meter: 330	bro pls change 11pin to VCC try agin or contact my msn [email protected] B,R,. gsmfans

10-07-2008, 09:09	#12 (permalink)
mentari No Life Poster Join Date: Sep 2003 Age: 43 Posts: 635 Member: 39948 Status: Offline Thanks Meter: 68	All pinout posted by gsmfans with pin 11 as boot pin is correct. use E113 cable. set pin 11 to gnd .(usually is this.) if not work set pin 11 to vcc.

02-16-2009, 14:02	#14 (permalink)
MED9 No Life Poster Join Date: Oct 2004 Location: No Location Posts: 1,641 Member: 87853 Status: Offline Thanks Meter: 1,231	i have same probleme freind i need help pls

04-19-2009, 15:40	#15 (permalink)
noure30 No Life Poster Join Date: Apr 2006 Location: Tunisia Posts: 2,699 Member: 261437 Status: Offline Sonork: no Thanks Meter: 922	help me a can't connect this phone 18 pin tv100 double sim and carte memoré plaese pinout for the is phone.........................thanks