bb5king with jaf 1.07 error 0x10130103 - GSM-Forum

avihay · 11-26-2008, 17:03

hi
when i check connection the following is written ...

Searching for JAF box ...
JAF box detected
JAF box ATmega firmware version: 1B0
Initialize JAF box ...
JAF box JAFBOX_BB5_FLASH_bb5challenge ...
Error. 0x10130103
ERROR!
Operation time: 00:12.
Successfully done.
Thread phone exit.

Error. 0x10130103 ????? what is this problem
please help
avihay

c1rca · 11-26-2008, 17:08

Just unplug and then plug in your JAF box again while software is running.

avihay · 11-26-2008, 17:16

hi
it doesnt help !!!
JAF box found.
UFSx box not found
Get card info ...
Verify card OK
Card SN: 900xxxxD
Card is activated
Card usage: 0%
Thread card exit.

card is found but still the same problem

Searching for JAF box ...
JAF box detected
JAF box ATmega firmware version: 1B0
Initialize JAF box ...
JAF box JAFBOX_BB5_FLASH_bb5challenge ...
Error. 0x10130103
ERROR!
Operation time: 00:12.
Successfully done.
Thread phone exit.

?????

***THE CLASH*** · 11-26-2008, 17:36

i kept getting this error,, untill i used USB ports directly on Motherboard.

11-26-2008, 17:03	#1 (permalink)
avihay Junior Member Join Date: Aug 2006 Posts: 33 Member: 326691 Status: Offline Thanks Meter: 14	bb5king with jaf 1.07 error 0x10130103 hi when i check connection the following is written ... Searching for JAF box ... JAF box detected JAF box ATmega firmware version: 1B0 Initialize JAF box ... JAF box JAFBOX_BB5_FLASH_bb5challenge ... Error. 0x10130103 ERROR! Operation time: 00:12. Successfully done. Thread phone exit. Error. 0x10130103 ????? what is this problem please help avihay

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
JAF PKEY Expansion - working with JAF 1.98.62	lalitjsraks	BB5KING	64	04-17-2012 09:57
N95 RM-159 cant be unlock with ver 1.07	Maiwand khan	BB5KING	13	11-25-2008 21:07

11-26-2008, 17:08	#2 (permalink)
c1rca Freak Poster Join Date: Apr 2008 Location: Location: Location: Posts: 242 Member: 751758 Status: Offline Thanks Meter: 113	Just unplug and then plug in your JAF box again while software is running.

11-26-2008, 17:16	#3 (permalink)
avihay Junior Member Join Date: Aug 2006 Posts: 33 Member: 326691 Status: Offline Thanks Meter: 14	hi it doesnt help !!! JAF box found. UFSx box not found Get card info ... Verify card OK Card SN: 900xxxxD Card is activated Card usage: 0% Thread card exit. card is found but still the same problem Searching for JAF box ... JAF box detected JAF box ATmega firmware version: 1B0 Initialize JAF box ... JAF box JAFBOX_BB5_FLASH_bb5challenge ... Error. 0x10130103 ERROR! Operation time: 00:12. Successfully done. Thread phone exit. ?????

11-26-2008, 17:36	#4 (permalink)
*THE CLASH* Super Moderator Join Date: Aug 2005 Location: UK.... Age: 57 Posts: 6,030 Member: 173077 Status: Offline Sonork: 100.1594293 Thanks Meter: 2,784	i kept getting this error,, untill i used USB ports directly on Motherboard.