GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Cyclonebox (https://forum.gsmhosting.com/vbb/f528/)
-   -   5130c contact service [ Solved ] (https://forum.gsmhosting.com/vbb/f528/5130c-contact-service-solved-1626306/)

kasketm 03-10-2013 01:59
5130c contact service [ Solved ]
 
Ive problem with 5130c : imei 12345610654321? and now contact service

Ive backup RPL and Security Block restored but same problem ... whats happend how to solve this pb... ???

kasketm 03-10-2013 02:05
1 Attachment(s)
Read info
Code:
MCU Version        V 06.65
MCU Date        01-04-09
Product                RM-495 (Nokia 5130 XpressMusic)
Manufacturer        (c) Nokia           
IMEI                12345610654321?
IMEI Spare        1A32541660452301
IMEI SV                1332541660452331F2000000
PPM                V 06.65, 01-04-09, RM-495, (c) Nokia            , AE
CNT                Content: ae_fr_red, V 06.65, 01-04-09, RM-495, (c) Nokia            ,
PSN                HML912217
Product Code        0580572
Module Code        0204024
Basic Product Code        0567773
PSD                0000000000000000
LPSN                0
RETU                16
TAHVO                22
AHNE                30
HW                1003
RFIC                06540601
DSP                ICPR72_09w03
LCD                SEIKO
BT                2222-143C
Failed to read info -> Failed to read SP info

Analyze security + SD repair + write PM
Code:
Started Phone Security Analysis...
MCU Version        V 06.65
MCU Date        01-04-09
Product                RM-495 (Nokia 5130 XpressMusic)
Manufacturer        (c) Nokia           
IMEI                12345610654321?
Reading Security Block...
Security block OK and saved to "RM-495_12345610654321_10032013_020250.SecurityBlock.PM"
Step 1 : Testing SIMLOCK
SIMLOCK SEFLTEST PASSED OK!
Step 2 : Testing SECURITY
-- SECURITY PROBLEM --

Phone have failed SECURITY Test, that means Superdongle Area is DAMAGED!
To repair it, simply slick "SX4 Authorization / SD Repair" button.
After SX4/SD Repair, don't forget to write PM file with fields 1,309 (if SW don't do this automatically)

Additionaly, Checking HWC/CCC Certs...
Booting CMT...
CMT_SYSTEM_ASIC_ID:        000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:                00000296
CMT_EM_ASIC_ID:                00000B22
CMT_PUBLIC_ID:                1DD0010F158C4950EEDB9CA0C26686B5B71965E9
CMT_ASIC_MODE_ID:        00
CMT_ROOT_KEY_HASH:        9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC:        273F6D55
CMT_SECURE_ROM_CRC:        DFAAF68F
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0C917F11196FDB7378C18EF7260698CA4489DCA0
APE Subsystem Not Found
Flashbus Write baud set to 5.0Mbits
HWC Looks OK!
CCC Looks OK!
Restarting MCU...
-- SECURITY PROBLEM --
Step 3 : Analyzing Security Block
"1DD0010F158C4950EEDB9CA0C26686B5B71965E9.C000192C" Exists, That is good...
Checking SUPERDONGLE...
SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
Checking SIMLOCK...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking MCU&DSP TIMESTAMPS...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking CMLA KEYS...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking ECC KEYS...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking DIV KEYS...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Analyze finished!
SX4 Authorization / SD Repair Procedure Started....
"1DD0010F158C4950EEDB9CA0C26686B5B71965E9.C000192C" Exists, That is good...
MCU Version        V 06.65
MCU Date        01-04-09
Product                RM-495 (Nokia 5130 XpressMusic)
Manufacturer        (c) Nokia           
IMEI                12345610654321?
Reading Security Block...
Security block OK and saved to "RM-495_12345610654321_10032013_020323.SecurityBlock.PM"
SX4 Status: Authorized
[120,0] Written, Length: 88 bytes, Status: OK
[120,1] Written, Length: 160 bytes, Status: OK
[120,2] Written, Length: 130 bytes, Status: OK
[120,3] Written, Length: 112 bytes, Status: OK
[308,1] Written, Length: 8192 bytes, Status: Not accepted, Code: 19
Write PM Finished, Record written OK: 4, Record written NOT OK: 1

kasketm 03-10-2013 02:13
SelfTest
Code:
Selftests to proceed: 29
Passed                ST_EAR_DATA_LOOP_TEST
Passed                ST_SIM_CLK_LOOP_TEST
Passed                ST_SIM_IO_CTRL_LOOP_TEST
Passed                ST_SLEEP_X_LOOP_TEST
Passed                ST_UEM_CBUS_IF_TEST
Failed                ST_KEYBOARD_STUCK_TEST
Passed                ST_CAMERA_IF_TEST
Passed                ST_BACKUP_BATT_TEST
Passed                ST_LCD_TEST
Passed                ST_LPRF_IF_TEST
Passed                ST_LPRF_AUDIO_LINES_TEST
Passed                ST_CURRENT_CONS_TEST
Passed                ST_RADIO_TEST
Passed                ST_BACKLIGHT_TEST
Passed                ST_SIM_LOCK_TEST
Failed                ST_SECURITY_TEST
Passed                ST_BT_WAKEUP_TEST
Passed                ST_HOOKINT_TEST
Passed                ST_TAHVOINT_TEST
Passed                ST_BTEMP_TEST
Passed                ST_IIC_TEST
Passed                ST_EXT_DEVICE_TEST
Passed                ST_CDSP_SLEEPCLK_FREQ_TEST
Passed                ST_CDSP_SLEEPCLOCK_FREQ_TEST
Passed                ST_CDSP_RF_BB_IF_TEST
Passed                ST_CDSP_RF_SUPPLY_TEST
Passed                ST_CDSP_TX_PLL_PHASE_LOCK_TEST
Passed                ST_CDSP_RX_IQ_LOOP_BACK_TEST

Mr.3. 03-10-2013 02:54
Click auto Imei recovery from bb5 tab

fastrpl 03-15-2013 05:57
you need factory BB5 RPL for repair corrupted imei if have not correct backup. contact me for BB5 RPL file.

kasketm 03-15-2013 22:35
=> Ive backup RPL and Security Block

Solved ;)


All times are GMT +1. The time now is 22:19.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.14035 seconds with 6 queries

SEO by vBSEO