Failed to prepare BB5 USB Connection -> Failed to initalize CMT ADL preloader (Solved

[ham_sang]

im trying to flash n8 via usb cable but failed and give me this error (Failed to prepare BB5 USB Connection -> Failed to initalize CMT ADL preloader
Failed to Process all Image files -> Failed to prepare BB5 USB Flashing)

what is this mean ? cant flash n8 via usb or wat ?

[NADEEM GONDAL]

U using as Dead USB mode to flash this unit

[ham_sang]

Originally Posted by nadeem gondal

u using as dead usb mode to flash this unit

so which box i need to check ? Pls tell me with more details.thanks you

[Mr.3.]

flash the phone with power off mode

[ham_sang]

Originally Posted by mr.3.

flash the phone with power off mode

this is the error that i get if flash phone on power off mode...

Processing pre flash tasks...
Pre flash tasks finished, continuing...
Selecting usb flashing method...
[bb5 adl server]: Found 0 active devices
[bb5 adl server]: Not found!
[bb5 nmwcd]: Found 0 active devices
[bb5 nmwcd]: Not found!
Proceeding with dead usb mode
press power-on shortly to run usb boot rom
failed to prepare bb5 usb connection -> no raw loader found in given images, dead usb cannot be performed
failed to process all image files -> failed to prepare bb5 usb flashing

btw im trying to flash n8 and when i plug the usb into phone it will automatic charging...

[Mr.3.]

do u have fbus cable?

[ham_sang]

Originally Posted by Mr.3.

do u have fbus cable?

YA BUT THE PHONE IS UNDER WARRANTY SO I CANT OPEN IT...THAT IS THE PROBLEM...

CAN U HELP ME WITH USB CABLE ?

br

[Mr.3.]

it could be loaders issue..delete cyclone folder (backup if you want stored folder) and install it again cyclone 1.15 with new exe and try it

and did you untick usb old usb flashing method in usb setting

[ham_sang]

Originally Posted by Mr.3.

it could be loaders issue..delete cyclone folder (backup if you want stored folder) and install it again cyclone 1.15 with new exe and try it

and did you untick usb old usb flashing method in usb setting

ok i hv done what u told me but now the box is giving me this error

WARNING: Security Problem #5 Detected, Please reinstall drivers from C:\Program Files\Cyclone Box\Drivers\!
Box Open Error -> Security problem #5
Initialization has failed -> No connection was established, or box is not in needed mode

what suppose to do ?

[Mr.3.]

Originally Posted by ham_sang

ok i hv done what u told me but now the box is giving me this error



what suppose to do ?

install latest cyclone drivers
C:\Program Files\Cyclone Box\Drivers\

http://forum.gsmhosting.com/vbb/7044262-post3.html

1) .- Go to Device Manager
2) .- Universal Serial Bus Controllers
3) .- Select which recognizes the Box Bootloader Mode
4) .- Right Click
5) .- Update Driver ...
6) .- Select Manual
7) .- Select C: \ Program Files \ Cyclone Box \ Drivers
8) .- Install completely, then it is only Mainteinance Box and enjoy the new update.

[ham_sang]

Originally Posted by Mr.3.

install latest cyclone drivers
C:\Program Files\Cyclone Box\Drivers\

http://forum.gsmhosting.com/vbb/7044262-post3.html

1) .- Go to Device Manager
2) .- Universal Serial Bus Controllers
3) .- Select which recognizes the Box Bootloader Mode
4) .- Right Click
5) .- Update Driver ...
6) .- Select Manual
7) .- Select C: \ Program Files \ Cyclone Box \ Drivers
8) .- Install completely, then it is only Mainteinance Box and enjoy the new update.

wow it work like charm....i uncheck the use old usb flashing method....

U'r my angel bro....

thanks alot man....g o d bless u

BR