[Shadab_M] | 04-26-2011 07:28 | Problem with 6303ci RM-638 with FBUS HI Cyclone Team!
I am getting in almost all 6303ci (RM-638) while taking backup or flashing.
Log attached: Code:
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600000001020C192102054100
CMT_EM_ASIC_ID: 00001040
CMT_EM_ASIC_ID: 00001030
CMT_PUBLIC_ID: 264000029C65004956A5D1D62D44382C2D9D8873
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 7B045400E1752022F9EB80B0DEA9C65D
CMT_BOOT_ROM_CRC: 67E82268
CMT_SECURE_ROM_CRC: F29CEA60
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAP3Gv40_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.48.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC003000000321, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported
RAP3Gv40_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.48.1, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
CBUS Request Error -> CBUS Response wrong header
Block Write Failed -> Failed to write CMT cert data (1)
Failed to send CMT FUR Algorithm -> Failed to send CMT Algorithm
Prepare phone failed with message -> Failed to Send CMT Algorithm
Failed to Read All Certificates -> Failed to Boot / Prepare Phone I tried with OLD PROTOCOL LOADERS: Code:
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600000001020C192102054100
CMT_EM_ASIC_ID: 00001040
CMT_EM_ASIC_ID: 00001030
CMT_PUBLIC_ID: 264000029C65004956A5D1D62D44382C2D9D8873
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 7B045400E1752022F9EB80B0DEA9C65D
CMT_BOOT_ROM_CRC: 67E82268
CMT_SECURE_ROM_CRC: F29CEA60
CMT Ready!
Searching for BootCode: DualLine 32Bit (Forcing OLD Protocol)
Prepare phone failed with message -> Not found required CMT Secondary Loader
Failed to Check BB5 Flashing Bus -> Failed to Boot / Prepare Phone Please fix this as it is very problematic.
Br,
Shadab Ahmad |