Pegasus Box Wiki
 

Wiki is an open knowledge base. In this thread everyone is encouraged to contribute his own experience working with Pegasus box.
This thread is not for posting logs! It's purpose is illustrated step-by-step manuals and it will be strictly moderated.
So welcome everyone! GSM Server Team will also contribute some knowledge :)

_______________
WBR,
GSM Server Team

I8700 Unlock Procedure
 

[ --- I8700/I917/I917R Unlock Manual --- ]

Cable type : Microusb UART or Original USB Data Cable

In case you are using microusb uart cable you may skip steps 1-4 of manual and start with step 5.

1. Power on phone without simcard inside.
2. On phones keyboard type ##634# and press "Call" button. Diagnostic menu will appear.
3. On phones keyboard type *#7284# and select "Modem, USB Diag".
4. Wait untill phone restarts and fully starts up.
5. Connect phone to the cable, install drivers if required.
6. Start pegasus software.
7. Select I8700 from the model list or type model name manually. Press "ENTER" button or click "Create New Module Button".
   http://boot-loader.com/downloads/peg...0_Unlock_1.JPG
8. Select phones port from comport dropdown menu.
   http://boot-loader.com/downloads/peg...0_Unlock_2.JPG
9. Click "Connect" button. Phones infromation and unlock codes will be read.
   http://boot-loader.com/downloads/peg...0_Unlock_3.JPG
10. You may unlock phone by inputing unlock code manually or just click "Unlock" button.
    http://boot-loader.com/downloads/peg...0_Unlock_4.JPG
11. Click "Disconnect" button.
    http://boot-loader.com/downloads/peg...0_Unlock_5.JPG
12. In Case you have used original usb cable, type ##634# and press "Call" button. Diagnostic menu will appear. On phones keyboard type *#7284# and select "Zune mode".

[ --- S5570/S5660/S5660M/S5830 Unlock Manual --- ]

Cable type : Microusb UART or Original USB Data Cable

In case you are using microusb uart cable you may skip steps 1-4 of manual and start with step 5.

1. Power on phone without simcard inside.
2. On phones keyboard type *#7284# and select "USB".
3. Goto "Menu" -> "Settings" -> "Applications" -> "Development". Enable "USB Debugging"
4. Reboot the phone.
5. Connect phone to the cable, install drivers if required.
6. Start pegasus software.
7. Select phones model from the model list or type model name manually. Press "ENTER" button or click "Create New Module Button".
   http://boot-loader.com/downloads/peg...0_Unlock_1.JPG
8. Select phones port from comport dropdown menu.
   http://boot-loader.com/downloads/peg...0_Unlock_2.JPG
9. Click "Connect" button. Phones infromation and unlock codes will be read.
   http://boot-loader.com/downloads/peg...0_Unlock_3.JPG
10. You may unlock phone by inputing unlock code manually or just click "Unlock" button.
    http://boot-loader.com/downloads/peg...0_Unlock_4.JPG
11. Click "Disconnect" button.
12. On phones keyboard type *#7284# and select "PDA". Goto "Menu" -> "Settings" -> "Applications" -> "Development". Disable "USB Debugging"
    

[ --- S5570/S5660/S5660M/S5830 IMEI Rebuild Manual --- ]

Attention IMEI Rebuild is illegal allmost in all countries!!! GSMServer Team included this feature only for purpose to restore phones with damaged IMEI. GSMServer does not takes any responsibility for use or misuse of this feature.

Cable type : Microusb UART or Original USB Data Cable

In case you are using microusb uart cable you may skip steps 1-4 of manual and start with step 5.

1. Power on phone without simcard inside.
2. On phones keyboard type *#7284# and select "USB".
3. Goto "Menu" -> "Settings" -> "Applications" -> "Development". Enable "USB Debugging"
4. Reboot the phone.
5. Connect phone to the cable, install drivers if required.
6. Start pegasus software.
7. Select phones model from the model list or type model name manually. Press "ENTER" button or click "Create New Module Button".
   http://boot-loader.com/downloads/peg...0_Unlock_1.JPG
8. Select phones port from comport dropdown menu.
   http://boot-loader.com/downloads/peg...0_Unlock_2.JPG
9. Click "Connect" button. Phones infromation and unlock codes will be read.
   http://boot-loader.com/downloads/peg...0_Unlock_3.JPG
10. Press "CTRL+I", "IMEI Rebuild" button will be visible now. In IMEI field type IMEI you would like to write into the phone. Click "Rebuild IMEI" button.
    http://boot-loader.com/downloads/peg...570_IMEI_1.JPG
11. Click "Disconnect" button.
12. On phones keyboard type *#7284# and select "PDA". Goto "Menu" -> "Settings" -> "Applications" -> "Development". Disable "USB Debugging"
    

T669 unlocking

http://i349.photobucket.com/albums/q...mzots/T669.jpg

and Connect

E2222 unlocked via UFS interface

Procedure:

insert UFS C3303k cable to phone without battery
Connect
insert battery to phone
unlock


http://i349.photobucket.com/albums/q...zots/E2222.jpg