c2-02.1 problem (ANSWERED) - Page 2 - GSM-Forum

.::ZUBER::. · 02-27-2012, 12:54

Quote:

Originally Posted by hatali

Bro, i flashed FW RM693 to FW rm692 ok and change filter z7100 but not work. In setting => device => Operator => manual => Operator not found. i think is PM, but search Pm for rm692 not found. Please help. Thanks.

Quote:

Originally Posted by .:JOAB:.

Sr. I need this PM To Please upload...TH

Quote:

Originally Posted by .:JOAB:.

We are waiting for PM File..BR

Quote:

Originally Posted by hatali

Please help PM for C2.02 RM692.

bros. here is your pm in waiting. have a good day.

.:JOAB:. · 02-27-2012, 21:25

Thanks Bro, work perfect for me, I use Firmware v6.51, and jumper the sawfilter, please upload the schematic for this phone later....BR

hatali · 02-28-2012, 04:13

Writing PM ok, but power on phone is display Contac service, how to unlock phone

.::ZUBER::. · 02-28-2012, 08:07

bro. i think you had just wrote the pm not flash, so you have to flash it with c2-02 RM692 ver 6.51 have a good day.

hatali · 02-28-2012, 09:45

Yes, i flashed RM692 before write PM

gbluez · 02-28-2012, 18:42

Quote:

Originally Posted by hatali

Yes, i flashed RM692 before write PM

looks like you messed up with security by writing full pm.
hope you have the backup.

bvm21 · 03-12-2012, 11:37

Quote:

Originally Posted by hatali

Writing PM ok, but power on phone is display Contac service, how to unlock phone

how to check f-bas? i have contact servise and backup. but need piout and whos box suport yhis phone in f-bas????

neeraj1st · 03-16-2012, 09:01

Quote:

Originally Posted by .:JOAB:.

Thanks Bro, work perfect for me, I use Firmware v6.51, and jumper the sawfilter, please upload the schematic for this phone later....BR

if u have the jumper image of this filter plz upload it

.:JOAB:. · 03-17-2012, 06:48

i can't upload image...download here: Mensaje de esta Web

the jumper y same like 1661....

umadineshdas · 08-22-2012, 07:47

Quote:

Originally Posted by .:JOAB:.

i can't upload image...download here: Mensaje de esta Web

the jumper y same like 1661....

Dear Joab@.

i need your help about this case..

i had to using jumper like nokia 1661..and flash Rm-692 v7.29..and after that i wrote rm-692 full pm...

And after that writing set gose to contact service......

And againn when i write back pm, which i had to save before flashing...and set gose to normal condition.......

Now my Question is how did you unlock this set...please guide me...
Because i had pay for brut force unlock...and it was show no service....

please help me............!!

.:JOAB:. · 08-23-2012, 16:09

You problem is with PM file, you must write PM RM-692 but skip security area to prevent contact service after write. You Phone will be work in GSM 900 Band. I do it and work perfect full signal

farooq GSM · 05-04-2014, 08:11

Quote:

Originally Posted by .:JOAB:.

You problem is with PM file, you must write PM RM-692 but skip security area to prevent contact service after write. You Phone will be work in GSM 900 Band. I do it and work perfect full signal

i try your method but not solve my problwm i think i change filter phone

shoaibrao · 11-10-2014, 14:24

I Also Need Filters Jumper Image
And
Good Modified PM For This Model Plz
Thanks Anticipation.....................

Fazil · 05-12-2015, 07:09

all the solutions fake , if so pls prove it by screeen shot , can not change the frequency range by changing the PM file

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need software upgrade for Nokia 5110	ptkrf	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	30	02-24-2016 10:21
DES key Driver	black	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	02-08-2014 04:50
8810 mbus-cable	zfrank	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-19-1999 13:12

02-27-2012, 21:25	#17 (permalink)
.:JOAB:. Freak Poster Join Date: Mar 2008 Age: 44 Posts: 209 Member: 725927 Status: Offline Thanks Meter: 48	Thanks Bro, work perfect for me, I use Firmware v6.51, and jumper the sawfilter, please upload the schematic for this phone later....BR

02-28-2012, 04:13	#18 (permalink)
hatali Insane Poster Join Date: Dec 2005 Location: Afganixtan Posts: 80 Member: 208759 Status: Offline Thanks Meter: 6	Writing PM ok, but power on phone is display Contac service, how to unlock phone

02-28-2012, 08:07	#19 (permalink)
.::ZUBER::. No Life Poster Join Date: Apr 2006 Location: MXBOX THUNDER Helpdesk Age: 50 Posts: 4,273 Member: 262425 Status: Offline Sonork: 100.1617691 Thanks Meter: 1,264	bro. i think you had just wrote the pm not flash, so you have to flash it with c2-02 RM692 ver 6.51 have a good day.

02-28-2012, 09:45	#20 (permalink)
hatali Insane Poster Join Date: Dec 2005 Location: Afganixtan Posts: 80 Member: 208759 Status: Offline Thanks Meter: 6	Yes, i flashed RM692 before write PM

03-17-2012, 06:48	#24 (permalink)
.:JOAB:. Freak Poster Join Date: Mar 2008 Age: 44 Posts: 209 Member: 725927 Status: Offline Thanks Meter: 48	i can't upload image...download here: Mensaje de esta Web the jumper y same like 1661....

08-23-2012, 16:09	#26 (permalink)
.:JOAB:. Freak Poster Join Date: Mar 2008 Age: 44 Posts: 209 Member: 725927 Status: Offline Thanks Meter: 48	You problem is with PM file, you must write PM RM-692 but skip security area to prevent contact service after write. You Phone will be work in GSM 900 Band. I do it and work perfect full signal

11-10-2014, 14:24	#28 (permalink)
shoaibrao No Life Poster Join Date: Dec 2006 Location: GSM WORLD Posts: 3,295 Member: 412843 Status: Offline Sonork: 100.1604902 Thanks Meter: 497	I Also Need Filters Jumper Image And Good Modified PM For This Model Plz Thanks Anticipation.....................

05-12-2015, 07:09	#29 (permalink)
Fazil No Life Poster Join Date: May 2006 Location: Sri Lanka Posts: 522 Member: 282757 Status: Offline Sonork: 100.1606418 Thanks Meter: 34	all the solutions fake , if so pls prove it by screeen shot , can not change the frequency range by changing the PM file