E63-2 RM449 White Screen (ANSWERED)

[LuverBoy]

After flashing, I get white screen for 3 seconds and power off. What's wrong here? Also, I noticed MCU is RM-437 instead of 449. Package was downloaded from the Nokia Lite in this forum

LOG:

Version from phone: 501.21.001
Version from file: 501.21.001
MXKEY Serial: [FT SCR2000 0] - [LuverBoy]
Using device: HTI BOX, FW ver: 00.17
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.0.0
Module ver: 1.0.0.18624(06-08-2011), Library ver: 1.0.0.12274(06-08-2011)
Reading Important data ...
Reading RPL backup ...
Reading Phone IDs ...
SYSTEM ASIC ID: 000000010000022600010006400C192101031103 [RAPIDO3G ver: 1.13]
ROOT KEY HASH: 9A28E119033B91D14D22838C86D0D53C
ROM ID: 4B9B75103E691FF8
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 1.30.0 revision: 0.0 size: 52.66 KB
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
Sending Overflow Loader(0x2E4 bytes) ...
Overflow loader running ..
Sending CustomLoader ...OK
PUBLIC ID: 20B00015C77D0052087F310502525807A8827B25
PRIVATE ID: 8EEC1A0EF13C7E0CC932801A55B9AC4E2A2BDA3D
productData saved.

Restarting phone ...
Reading Secure Storage ...
Reading SIMLOCK data ...
Reading CERT data ...
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101031103 [RAPIDO3G ver: 1.13]
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 20B00015C77D0052087F310502525807A8827B25
ASIC MODE ID: 00
ROOT KEY HASH: 9A28E119033B91D14D22838C86D0D53C
ROM ID: 4B9B75103E691FF8
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 10.32.0 revision: 2.0 size: 0x3B80
Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
eBB5ProtocolType: NEW
TransmissionMode: DDR&TX2
Storage0: 0000 0000 - 0000 0000 type: RAM, asic:CMT
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
Storage2: 0400 0000 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage3: 0000 0001 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage4: 00EC 0040 - 0000 0121 [Samsung 2Gb DDP OneNAND,2 Gbits] type: FLASH,MuxOneNAND, asic:CMT
Suggested algorithm: XSR 1.5
Algorithm: RAPIDOv11_XSR15_alg.fg [XSR 1.5] version: 10.32.0 revision: 2.0 size: 0x83902
Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
TransmissionMode: DDR&TX2
FUR: Adding Asic CMT as client OK
CMT PAPUBKEYS HASH: D9C25399C696B8549EDCDB1497A950B3A20DDFB6
Reading CMT NPC (0x190 bytes).
Reading CMT VARIANT (0x0 bytes).
Reading CMT CCC (0x160 bytes).
Reading CMT HWC (0xD4 bytes).
Flash Imei: 35683802093370
NPC_DATA saved OK
CCC_DATA saved OK
HWC_DATA saved OK
SIMLOCK_DATA saved OK
SIMLOCK_KEY_DATA saved OK
SUPERDONGLE_KEY_DATA saved OK
WMDRM_PD_DATA saved OK
RF_DATA is empty.
WARRANTY_DATA saved OK
PROD_DATA saved OK
BT_DATA saved OK
LOCK_DATA saved OK
LOCK120_DATA saved OK
BB_DATA is empty.
WLAN_DATA saved OK
RPL saved to "C:\mobileEx\3.5\data\backup\BB5_35683802093370_BA CK.rpl"
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101031103 [RAPIDO3G ver: 1.13]
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 20B00015C77D0052087F310502525807A8827B25
ASIC MODE ID: 00
ROOT KEY HASH: 9A28E119033B91D14D22838C86D0D53C
ROM ID: 4B9B75103E691FF8
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 10.32.0 revision: 2.0 size: 0x3B80
Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
eBB5ProtocolType: NEW
TransmissionMode: DDR&TX2
Storage0: 0000 0000 - 0000 0000 type: RAM, asic:CMT
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
Storage2: 0400 0000 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage3: 0000 0001 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage4: 00EC 0040 - 0000 0121 [Samsung 2Gb DDP OneNAND,2 Gbits] type: FLASH,MuxOneNAND, asic:CMT
Suggested algorithm: XSR 1.5
Algorithm: RAPIDOv11_XSR15_alg.fg [XSR 1.5] version: 10.32.0 revision: 2.0 size: 0x83902
Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
TransmissionMode: DDR&TX2
FUR: Adding Asic CMT as client OK
CMT PAPUBKEYS HASH: D9C25399C696B8549EDCDB1497A950B3A20DDFB6
Processing MCU file: rm437_501.21.001_prd.c00
[BB5,XSR 1.5] size: 63.37 MB
Supported Ids: 4003192101002003, 400C192101002003, 0003192101002003, 000C192101002003, 000C192101011103, 0003192101011103, 400C192101011103, 4003192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101051103, 400C192101051103
Storing certificate [NPC, CCC, HWC, R&D] ...OK
Partitioning ...OK
Erase size: 122.56 MB
CMT FLASH,MuxOneNAND area [00040000-007FFFFF]
CMT FLASH,MuxOneNAND area [00A00000-0759FFFF]
CMT FLASH,MuxOneNAND area [0F1C0000-0F8BFFFF]
Formating partition ...
Prog.status for Asic CMT ...
NAND: Success
Flash programming ...
CMT ADA block sent
CMT KEYS block sent
CMT PRIMAPP block sent
CMT RAP3NAND block sent
CMT PASUBTOC block sent
CMT PAPUBKEYS: D9C25399 [RAP Certificate 137 v.1] sent
CMT SOS*UPDAPP block sent
CMT SOS*DSP0 block sent
CMT SOS*ISASW block sent
CMT SOS*CORE block sent
CMT SOS+ROFS block sent
Prog.status for Asic CMT ...
NAND: Success
Programming completed in 3 min 7.375 s
Processing PPM file: rm449_501.21.001_prd.v211_30
[BB5,XSR 1.5] size: 23.17 MB
Supported Ids: 4003192101002003, 400C192101002003, 0003192101002003, 000C192101002003, 000C192101011103, 0003192101011103, 400C192101011103, 4003192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101051103, 400C192101051103
Erase size: 33.56 MB
CMT FLASH,MuxOneNAND area [05420000-0759FFFF]
Formating partition ...
Prog.status for Asic CMT ...
NAND: Success
Flash programming ...
CMT SOS+ROFX block sent
Prog.status for Asic CMT ...
NAND: Success
Programming completed in 1 min 11.000 s
Processing CNT file: RM437_ENO_008.07.45_100.71.920.a01.fpsx
[BB5,XSR 1.5] size: 1.51 MB
Supported Ids: 4003192101002003, 400C192101002003, 0003192101002003, 000C192101002003, 000C192101011103, 0003192101011103, 400C192101011103, 4003192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101051103, 400C192101051103
Storing certificate [NPC, CCC, HWC, R&D] ...OK
Erase size: 64 KB
Prog.status for Asic CMT ...
NAND: Success
Flash programming ...
CMT SOS*ENO block sent
Prog.status for Asic CMT ...
NAND: Success
Programming completed in 4.891 s
Processing CNT file: sofie_erase_y_drive.fpsx
[BB5,XSR 1.5] size: 236 Bytes
Supported Ids: 4003192101002003, 400C192101002003, 0003192101002003, 000C192101002003, 000C192101011103, 0003192101011103, 400C192101011103, 4003192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103
Erase size: 1.62 MB
CMT FLASH,MuxOneNAND area [0F020000-0F1BFFFF]
Prog.status for Asic CMT ...
NAND: Success
Flash programming ...
Programming completed in 0.015 s
Processing CNT file: rm449_501.21.001_30.211U
[BB5,XSR 1.5] size: 23.42 MB
Supported Ids: 4003192101002003, 400C192101002003, 0003192101002003, 000C192101002003, 000C192101011103, 0003192101011103, 400C192101011103, 4003192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101051103, 400C192101051103
Erase size: 64 KB
Prog.status for Asic CMT ...
NAND: Success
Flash programming ...
Prog.status for Asic CMT ...
NAND: Success
Programming completed in 1 min 12.890 s
Total time for flashing process(boot+erase+write) was 5 min 52.157 s

After Flash Processing ...
Updating Product Code OK.
Reseting Warranty And LifeTimer OK.
Reseting Factory Values OK.
Uploading Product Profile Writing ProductProfile: C:\mobileEx\3.5\modules\{3EBAF1\RM-449\RM449_0577062_501.21.001_006\ProductProfile_v1 .0.xml
ProductProfile version: 1.0
OK.

Phone type: RM-449 (Nokia E63)
SW version: V ICPR71_09w47.8 05-08-10 RM-449 (c) Nokia
Imei plain: 35683802093370-4
Product code: 0577062
Battery voltage: 4977 mV, current: 61 mA
ApeCoreSw: 501.21.001
Language Pack:
- not available.

SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!


Imei net: 356838020933704
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN


Thanks!...

[-=Meltech09=-]

hi..,


here is the problem...

SECURITY_TEST failed!

Now Go to PM TAB..


tick load rfbb from server..


tick PMM Auth..


if phone successfully authorized..


tick write...please post result...

[LuverBoy]

MXKEY Serial: [FT SCR2000 0] - C0850AA5
Using device: HTI BOX, FW ver: 00.17
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.0.0
Module ver: 1.0.0.18624(06-08-2011), Library ver: 1.0.0.12274(06-08-2011)
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101031103 [RAPIDO3G ver: 1.13]
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 20B00015C77D0052087F310502525807A8827B25
ASIC MODE ID: 00
ROOT KEY HASH: 9A28E119033B91D14D22838C86D0D53C
ROM ID: 4B9B75103E691FF8
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 10.32.0 revision: 2.0 size: 0x3B80
Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
eBB5ProtocolType: NEW
TransmissionMode: DDR&TX2
Storage0: 0000 0000 - 0000 0000 type: RAM, asic:CMT
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
Storage2: 0400 0000 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage3: 0000 0001 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage4: 00EC 0040 - 0000 0121 [Samsung 2Gb DDP OneNAND,2 Gbits] type: FLASH,MuxOneNAND, asic:CMT
Suggested algorithm: XSR 1.5
Algorithm: RAPIDOv11_XSR15_alg.fg [XSR 1.5] version: 10.32.0 revision: 2.0 size: 0x83902
Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
TransmissionMode: DDR&TX2
FUR: Adding Asic CMT as client OK
CMT PAPUBKEYS HASH: D9C25399C696B8549EDCDB1497A950B3A20DDFB6
Original Imei: 35683802093370
Original Product code: 0577062
Bluetooth ID: 0023B4D7CC02
WLAN ID: 0023B4E70E42
SIMLOCK PA identifier:
[0] PA_SL2
[1] PA_SL3

Phone type: RM-449 (Nokia E63)
SW version: V ICPR71_09w47.8 05-08-10 RM-449 (c) Nokia
Imei plain: 35683802093370-4
Product code: 0577062
Battery voltage: 4971 mV, current: 70 mA
Language Pack:
- not available.

SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!


Imei net: 356838020933704
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
Scanning local SX4 Card ...
No SX4 Card found.
SERVER->Served by MXKEY - BLADE X at host1, agent version 1.1 revision 0.7

Authenticating using security server ...
Connecting to server[main.mxkey.biz] ...MXKEY SX4CARD - ID, hello 117.103.94.154
Bad phones ack, probably SUPERDONGLE_KEY corrupted !
Wrong response to SD verify request
Retrying ...
SERVER->Served by MXKEY - BLADE X at host1, agent version 1.1 revision 0.7

Authenticating using security server ...
Connecting to server[main.mxkey.biz] ...MXKEY SX4CARD - ID, hello 117.103.94.154
Bad phones ack, probably SUPERDONGLE_KEY corrupted !
Wrong response to SD verify request
Retrying ...
SERVER->Served by MXKEY - BLADE X at host1, agent version 1.1 revision 0.7

Authenticating using [MX] security server ...
Connecting to server[main.mxkey.biz] ...MXKEY SX4CARD - ID, hello 117.103.94.154
SUPERDONGLE authorized !
Done.
SERVER->Served by MXKEY - BLADE X at host1, agent version 1.1 revision 0.7

Updating RFBB data ...
Writing section 1...
Writing section 309...
Done.

[LuverBoy]

Phone still in white screen but now, longer.

[-=Meltech09=-]

Originally Posted by LuverBoy

Phone still in white screen but now, longer.

flash it with higher version with same phone type...

[LuverBoy]

I'll be back.... for more problems!

[LuverBoy]

Ok, all the sites I went to have the same version.... 501.21.001... which is the same version I just loaded.

Anything else?

[-=Meltech09=-]

hi..,


now flash it with this file...E66_blank_504KB_pmm_10.fpsx


use as your mcu then flash..of any flasher you have...



post result..and logs please...

[LuverBoy]

Wow, still white screen....???????????????????????????

Already flashed blank and full firmware but still @ it! Any other tricks?

[shybet]

If you are using HTI box, just go to PM Tab, and click SD Repair.

[Deepesh Sharma]

i have same problem in nokia n91 and i will do all trick but problem still same

[gbluez]

Originally Posted by LuverBoy

Wow, still white screen....???????????????????????????

Already flashed blank and full firmware but still @ it! Any other tricks?

use HTI, apply this patch:


ignore different logs/version. just an example

Originally Posted by deepesh11

i have same problem in nokia n91 and i will do all trick but problem still same

N91 is different platform. make your own thread. let's talk about it there.