i can not red hach 6303c

[sameh777]

scan ok
Imei net: 359333039070745
Version: SIMLOCK SERVER
Provider: O2 (Germany) GmbH & Co. OHG , Country: Germany
Counter: 0/3, 0/10

CONFIG_DATA: 2620700000000000
PROFILE_BITS: 8000000000000000

BLOCK1: 1=CLOSED(MCCMNC), DATA=2620749F
BLOCK2: 1=CLOSED(MCCMNC), DATA=2620751F

and read hach not good
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.21200(18-07-2012), Library ver: 1.0.0.14214(25-10-2012)
ERROR: Packet Error(0xAA), code 0xC0000001
ERROR: Packet Error(0xAA), code 0xC0000002
Error details:
Bad contact, TX line remains low !
VCC_PH BSI TX RX RX2 CLK
1 0 0 1 1 0
ERROR: bootstrap failed!

[artur223]

RM-443/Nokia 6303c not supported over USB use FBUS

[sameh777]

Originally Posted by artur223

RM-443/Nokia 6303c not supported over USB use FBUS

i use FBUS cable and mit USB need mcu

[jajo111]

use other cable.
Do you use UFC cable ? (If yes use cable nr 10 UFCv2).

[.::ZUBER::.]

Originally Posted by sameh777

i use FBUS cable and mit USB need mcu

Use good FBus Cable,

Why don't you use USB Cable, RAPS V3 Phone supported with USB.

Use FiRe Agent & Download Firmware,
Select Firmware with Market Drop Down Menu & proceed with your work for Hash Read.


BR,
ZUBER

[sameh777]

Originally Posted by .::ZUBER::.

Use good FBus Cable,

Why don't you use USB Cable, RAPS V3 Phone supported with USB.

Use FiRe Agent & Download Firmware,
Select Firmware with Market Drop Down Menu & proceed with your work for Hash Read.


BR,
ZUBER

i have mcu but Not read hach