MXBOX - Successfully Unlocked/repaired/flashed Phones By MXBOX - Page 260 - GSM-Forum

.::THE ROCK::. · 11-02-2013, 08:57

Code:

Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device synchronized.
CPU: XGOLD 213
 Using embedded SBL from MCU.
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
 Boot mode: 0xCC
 EBL version major/minor: 10.49
 EBL version: Quantum_Bootloader_10.49_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 0089 8982 - 23280001 [Intel NU48F512,512 Mbits]
CFI information:
 Flash settings: 0/1024, size: 0x04000000
 1 Block regions:
  512 x 0x00020000 = 0x04000000
EBL ready !
Original IMEI: 35327405354198
IMEI_DATA saved OK
CCC_DATA saved OK
HWC_DATA saved OK
RPL saved to "C:\mobileEx\3.5\data\backup\XGOLD_35327405354198_back.RPL" 
Processing file: rm827__03.04.mcusw
 Downloading item CODE:rm827__03.04.mcusw_ebl_psi.fls, num block: 4, size: 26 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.390 s
Erasing area 0x40040000-0x4005FFFE ...OK
Programming completed in 0.452 s
Erasing area 0x40060000-0x4015FFFE ...OK
Programming completed in 1.684 s
Erasing area 0x40280000-0x41B3FFFE ...OK
Programming completed in 37.752 s
Checksum verified (0x74A0)
Processing file: rm827__03.04.ppm_mh1
 Downloading item CUST:package_mh1.ppm_ebl_psi.fls, num block: 1, size: 3.12 MB
Erasing area 0x41BC0000-0x41EDE1A2 ...OK
Programming completed in 5.101 s
Checksum verified (0xD976)
Processing file: rm827__03.04.image_mh1_059N0N5
 Downloading item CUST:package_mh1_059N0N5.image.fls, num block: 1, size: 14.88 MB
Erasing area 0x421C0000-0x43E1FFFE ...OK
Programming completed in 23.821 s
Checksum verified (0xF4C0)
Total time for flashing process(boot+erase+write) was 7 min 45.639 s
Waiting for USB device removal ... 
Waiting for device boot up ...
Device connected: nmwcdc\Nokia C2-00 USB Phonet, PORT_ID: 218E9049
Verifying communication to device OK.
 
 
 
Phone type: RM-827 (Nokia 110)
SW version: V 03.04 20-04-12 RM-827 (c) Nokia             
Imei plain: 35327405354198-7
Product code: 059P8F5
Battery voltage: 4988 mV, current: 147 mA
Cellular system: GSM
ASIC ID: 0x0000, type: 11
Ppm Id: MH1
Language Pack:
- not available.

Camera config: NI00CS0000040C21AC67, ver: 004.032
 
Imei net: 35327405354198
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10
 
CONFIG_DATA: 0010100000000000
PROFILE_BITS: 800000000004000B
 
BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
FULL FACTORY... OK
USER DATA... OK
LEAVE FACTORY... OK
SERVICE CENTER... OK
SOFTWARE UPGRADE... OK
PRODUCTION TUNING... OK
Reset User Code (to default:12345) ... OK
Completed in 0.109 s
Nokia USB ROM disconnected.

mubashar757 · 11-02-2013, 12:21

hti not new update.....................

.::THE ROCK::. · 11-07-2013, 08:43

NOKIA X2-02 FLASHING

Code:

Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device synchronized.
CPU: XGOLD 213
 Using embedded SBL from MCU.
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
 Boot mode: 0xCC
 EBL version major/minor: 10.46
 EBL version: Quantum_Bootloader_10.46_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 0089 8982 - 23280001 [Intel NU48F512,512 Mbits]
CFI information:
 Flash settings: 0/1024, size: 0x04000000
 1 Block regions:
  512 x 0x00020000 = 0x04000000
EBL ready !
Original IMEI: 35169505550314
IMEI_DATA saved OK
CCC_DATA saved OK
HWC_DATA saved OK
RPL saved to "C:\mobileEx\3.5\data\backup\XGOLD_35169505550314_back.RPL" 
Processing file: rm694__11.84.mcusw
 Downloading item CODE:rm694__11.84.mcusw_ebl_psi.fls, num block: 4, size: 26.25 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.374 s
Erasing area 0x40040000-0x4005FFFE ...OK
Programming completed in 0.375 s
Erasing area 0x40060000-0x4015FFFE ...OK
Programming completed in 1.575 s
Erasing area 0x40280000-0x41B7FFFE ...OK
Programming completed in 34.542 s
Checksum verified (0xB615)
Processing file: rm694__11.84.ppm_m_f
 Downloading item CUST:package_m_f.ppm_ebl_psi.fls, num block: 1, size: 4.22 MB
Erasing area 0x41C00000-0x4203822A ...OK
Programming completed in 6.334 s
Checksum verified (0x6D2D)
Processing file: rm694__11.84.image_m_f_059J6X2
 Downloading item CUST:package_m_f_059J6X2.image.fls, num block: 1, size: 13.88 MB
Erasing area 0x42300000-0x43E1FFFE ...OK
Programming completed in 21.575 s
Checksum verified (0xBC89)
Total time for flashing process(boot+erase+write) was 8 min 5.331 s
Waiting for USB device removal ... 
Waiting for device boot up ...
Device connected: nmwcdc\Nokia X2-02 USB Phonet, PORT_ID: 351695055503140
Verifying communication to device OK.
 
 
 
Phone type: RM-694 (X2-02)
SW version: V 11.84 13-09-12 RM-694 (c) Nokia             
Imei plain: 35169505550314-0
Product code: 059N1T6
Language Pack:
- not available.

Imei net: 35169505550314
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10
 
CONFIG_DATA: 0010100000000000
PROFILE_BITS: 800000000003000B
 
BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
FULL FACTORY... OK
USER DATA... OK
LEAVE FACTORY... OK
SERVICE CENTER... OK
SOFTWARE UPGRADE... OK
PRODUCTION TUNING... OK
Reset User Code (to default:12345) ... OK
Completed in 0.110 s

zaman.bhatti377 · 11-07-2013, 11:59

mx box is best devise for nokia mobiles best wishs mx team

anis_rainbow · 12-20-2013, 08:26

nokia 6555b unlock done

Code:

Imei net: 356271010177027
Version: SIMLOCK SERVER
Provider: Cingular Wireless , Country: United States
Counter: 0/3, 0/10
 
CONFIG_DATA: 3101700000000000
PROFILE_BITS: 8000000000000000
 
BLOCK1: 1=CLOSED(MCCMNC), DATA=310150  [United States-Cingular Wireless ]
BLOCK2: 1=CLOSED(MCCMNC), DATA=310170  [United States-Cingular Wireless ]
BLOCK3: 1=CLOSED(MCCMNC), DATA=311180  [United States-Cingular Wireless, Licensee Pacific Telesis Mobile Services, LLC ]
BLOCK4: 1=CLOSED(MCCMNC), DATA=310410  [United States-Cingular Wireless ]
BLOCK5: 1=CLOSED(MCCMNC), DATA=310980  [United States-Texas RSA 7B3 dba Peoples Wireless Services ]
MXKEY [MxKey Team HTI PLUS Flasher Interface 2], SN: C0871C68
Using device: HTI, FW ver: 00.50, SN: 01008E6B
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0 
Module ver: 1.0.0.21719(09-05-2013), Library ver: 1.0.0.14397(09-05-2013)
 
Phone type: RM-289 (Nokia 6555b)
SW version: V 03.31 01-08-07 RM-289 (c) Nokia 
 
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006010C192101003000 [RAP3G ver: PA 3.0]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 1F600119D4D16750C1CC3333A3FF94E8403AB28F
ASIC MODE ID: 00
ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 273F6D55DFAAF68F
SecondaryBoot: RAP3Gv30_2nd.fg [BB5]  version: 11.34.0 revision: 3.0 size: 0x3B80
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
eBB5ProtocolType: NEW
TransmissionMode: DDR&TX2
Storage0: 0000 0000  - 0000 0000  type: RAM, asic:CMT 
Storage1: FFFF 0000  - 0000 0000  type: MMC, asic:CMT 
Storage2: 00EC 220C  - 0000 8921 [Samsung K8F1215ETM,512 Mbits] type: FLASH,NOR, asic:CMT 
Storage3: 0000 0001  - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT 
Algorithm: RAP3Gv30_XSR14_alg.fg [BB5 ALGORITHM]  version: 11.34.0 revision: 3.0 size: 0x81324
 Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
TransmissionMode: DDR&TX2
FUR: Adding Asic CMT as client OK
CMT PAPUBKEYS HASH: A32E417B72C365977BB436843861AB6E35608542
PUBLIC ID: 1F600119D4D16750C1CC3333A3FF94E8403AB28F
PRIVATE ID: C8BE02A26C593B8F9CDB2C6485B2D6264F8BF640
 E-FUSE: 719402F7
 SEC ROM CRC: DFAAF68F
Restarting phone ...
 
Updating SIMLOCK ...OK
 
Reading Simlock info ...
Imei net: 356271010177027
Version: SIMLOCK SERVER
Counter: 0/3, 0/10
 
CONFIG_DATA: 2440700000000000
PROFILE_BITS: 8000000000000000
 
BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN

choudhary mobile · 01-04-2014, 13:54

.::THE ROCK::. · 04-03-2014, 15:45

I AM TRAI UFS BUT BOOTING PROBLEM (I THINK F BUS CABEL PINUT MIRSING)

TRAI MX BOX PERFECT FORK

manpreetmani · 05-31-2014, 10:23

prashant1212 · 08-24-2014, 14:26

thanka bro ................................................10 000%

my pro. solv

Joshbrbl · 09-05-2014, 23:28

HI guys you do unlocking ? can you help me unlock my nokia e63?

regie_skater · 09-06-2014, 05:38

sir i just need mxbox orange software thank you sir and good day

allumts · 09-06-2014, 09:57

Quote:

Originally Posted by Joshbrbl

HI guys you do unlocking ? can you help me unlock my nokia e63?

Cannot Unlocking NOTHINGH, this is Dead project and no more server, work only Standalone, (who is been lucky Sw has not Dead this coloured plastic box), unlock not Work how also Flash Not work, Risk of damage you device, NOT USE this for any operation, i'm warning after you are free of to do what you want.
regard

allumts · 09-06-2014, 10:02

Quote:

Originally Posted by choudhary mobile

Ahahah...phone damaged buy Plastic Coloured Box, flash remain for half and cannot continue becouse haven't more server that support this, what post?, for THAT?...you are good boys, please not fool peoples whith you post.
regard
allumts

alex muatha · 04-08-2015, 15:27

does mxkey box support nokia 503 ...flashing

allumts · 04-08-2015, 21:45

Not use these Dead project for you Nokia 503 if not want damage....not connect you Nokia to anythinghs to this "DEAD PROJECT"

04-03-2014, 15:45	#3892 (permalink)
.::THE ROCK::. Product Supporter Join Date: Jul 2011 Location: ISLAMIC & INDIA WITH MIRACLE T Age: 37 Posts: 5,807 Member: 1617868 Status: Offline Sonork: 100.1625996 Thanks Meter: 2,028	Nokia 1220 phone lock reset mx key I AM TRAI UFS BUT BOOTING PROBLEM (I THINK F BUS CABEL PINUT MIRSING) TRAI MX BOX PERFECT FORK

05-31-2014, 10:23	#3893 (permalink)
manpreetmani Freak Poster Join Date: May 2013 Location: india punjab Posts: 412 Member: 1930279 Status: Offline Sonork: 100.1663273 Thanks Meter: 113	nokia 305 flash done.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	23	01-07-2018 17:14
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
news headlines to gsm phone	mos	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	05-22-2016 11:42
need software for 5161 by cable	mln2000	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	08-29-2010 20:17

11-02-2013, 12:21	#3887 (permalink)
mubashar757 Freak Poster Join Date: Dec 2011 Age: 39 Posts: 446 Member: 1702642 Status: Offline Sonork: 100.1638878 Thanks Meter: 85	hti not new update.....................

11-07-2013, 11:59	#3889 (permalink)
zaman.bhatti377 Registered User Join Date: Oct 2013 Location: multan bastimalook Posts: 42 Member: 2056634 Status: Offline Sonork: www.sonork.com Thanks Meter: 3	mx box is best devise for nokia mobiles best wishs mx team

01-04-2014, 13:54	#3891 (permalink)
choudhary mobile No Life Poster Join Date: Dec 2010 Location: india , up , ghaziabad Posts: 751 Member: 1475133 Status: Offline Sonork: 100.1619773 Thanks Meter: 407

08-24-2014, 14:26	#3894 (permalink)
prashant1212 Insane Poster Join Date: Nov 2012 Location: faizabad bikapur (u.p.) Posts: 65 Member: 1834422 Status: Offline Thanks Meter: 10	thanka bro ................................................10 000% my pro. solv

09-05-2014, 23:28	#3895 (permalink)
Joshbrbl Junior Member Join Date: Sep 2014 Posts: 1 Member: 2252893 Status: Offline Thanks Meter: 0	HI guys you do unlocking ? can you help me unlock my nokia e63?

09-06-2014, 05:38	#3896 (permalink)
regie_skater Junior Member Join Date: May 2010 Location: manila Posts: 28 Member: 1309495 Status: Offline Sonork: bishop Thanks Meter: 0	sir i just need mxbox orange software thank you sir and good day

04-08-2015, 15:27	#3899 (permalink)
alex muatha Junior Member Join Date: Sep 2008 Posts: 22 Member: 856659 Status: Offline Sonork: 22760529 Thanks Meter: 2	does mxkey box support nokia 503 ...flashing

04-08-2015, 21:45	#3900 (permalink)
allumts No Life Poster Join Date: Apr 2011 Age: 58 Posts: 16,408 Member: 1564612 Status: Offline Thanks Meter: 12,343	Not use these Dead project for you Nokia 503 if not want damage....not connect you Nokia to anythinghs to this "DEAD PROJECT"