noki 1208 flash problem(ANSWERED)

[mlife1999]

i have nokia 1208 when i flash it handset give erroe on ppm file
i erase it and again flash but same any idea
logs
MXKEY Serial: [FT SCR2000 0] - C08259AC
Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Driver: UFS2XX, ver: 3.8.14.0, NTMP ver: 2.8.14.0
Module ver: 1.0.0.16662(04-05-2011), Library ver: 1.0.0.9921(04-05-2011)
ASIC ID: 0x2292 [UPPCosto ver: 1.3]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0089 8872 [Intel 28F320W18,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u3_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x56A0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 0083C41AA3BDA66
ASIC type: 11
UEM Imei: 35931602282594
Flash Imei: 35931602282594
RPL saved to "D:\3.4\data\backup\RPL\35931602282594_BACK.rp l"
Processing MCU file: rh105_06.000
[DCT4,DCT4 ALGORITHM] size: 2.27 MB
Supported Ids: 2292
ASIC ID: 0x2292 [UPPCosto ver: 1.3]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0089 8872 [Intel 28F320W18,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u3_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x56A0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 0083C41A:2984DA60
Area [01000000-0100FFFF] erased in 0.719 s
Area [01010000-013AFFFF] erased in 32.484 s
Area [013B0000-013EFFFF] erased in 2.843 s
Area [017C0000-017EFFFF] erased in 0.156 s
Flash programming ...
Programming completed in 23.875 s
File Processed in 1 min 22.984 s
Processing CNT file: rh1050_nai6.00ia
[DCT4,DCT4 ALGORITHM] size: 141.07 KB
Supported Ids: 2292
ASIC ID: 0x2292 [UPPCosto ver: 1.3]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0089 8872 [Intel 28F320W18,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u3_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x56A0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 0083C41A:2984DA60
Area [01380000-013AFFFF] erased in 1.890 s
Flash programming ...
Programming completed in 1.532 s
Content extract fail, continue anyway ...
File Processed in 1 min 6.609 s
Processing PPM file: rh105_06.00ia
[DCT4,DCT4 ALGORITHM] size: 1.18 MB
Supported Ids: 2292
ASIC ID: 0x2292 [UPPCosto ver: 1.3]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0089 8872 [Intel 28F320W18,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u3_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x56A0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 0083C41A:2984DA60
Area [01240000-0124FFFF] erased in 0.781 s
Area [01250000-0137FFFF] erased in 10.750 s
Flash programming ...
Programming completed in 12.516 s
File Processed in 52.407 s
Total time for flashing process(boot+erase+write) was 3 min 22.016 s

Phone not responding !

[gbluez]

hi,
- full erase (don't mark safe erase). reflash
- if still dead: HW damaged, most case; bad flash chip.

BR