Cruiser cant unlock W810i CID 50

[mony_valley]

  23:47:22  SE Ultimate Unlocker v3.07 by Cruiser Team
  23:47:22  - Fast & Full - Unlock, Relock, Show codes, Sec.zone rebuild, EROM repair, CID change
  23:47:22  Initializing...
! 23:47:22  1. Please see the documentation first (the tab 'Info' or attached .pdf file)
! 23:47:22  2. Choose the phone model
! 23:47:22  3. Select the desired options
! 23:47:22  4. Please connect the phone either via USB while holding 2-5…
! 23:47:22  - or via a serial cable and double-click on it in the device list
  23:47:41  Selected phone: W810
  23:47:41  Connecting via SEMC USB Flash Device (USB1)…
  23:47:41  Device driver version: 2.2.0.2
  23:47:41  Device driver date: 12-5-2008
  23:47:41  Connecting to the baseband CPU...
  23:47:41  Entering baseband CPU service mode...
  23:47:42  Detected chipset: DB2012
  23:47:42  Boot mode: EROM
  23:47:42  EROM version: R3A024      prgCXC1251050_EROM_DB201X_SIBLEY_FOTA_FLAFLA_SEMCUSB
E 23:47:42  Error: 0x889C690F
E 23:47:42  Unsupported boot mode
! 23:47:42  Please boot via ROM
E 23:47:42  Failed!
! 23:47:42  To report errors right-click this window

can support answer me
what should i do ??

thanks

mony_valley

[mony_valley]

  00:01:06  SE Full Unlocker v2.20 by Cruiser Team
  00:01:06  Initializing...
! 00:01:06  1. Please see the documentation first (a PDF installed with the application)
! 00:01:06  2. Make sure the appropriate phone modem drivers are installed
! 00:01:06  3. Fill in the connection settings under settings tab
! 00:01:06  4. Turn the phone ON
! 00:01:06  5. Connect the phone…
  00:06:44  Connecting via SEMC WMC Device (COM11, COM8)…
  00:06:44  Starting communication...
  00:06:45  Communicating with server…
  00:06:48  Remainig credit (supreme): 1.01
  00:06:49  Restarting phone …
  00:07:16  Connecting via SEMC USB Flash Device (USB1)…
  00:07:16  Device driver version: 2.2.0.2
  00:07:16  Device driver date: 12-5-2008
  00:07:16  Starting communication...
  00:07:17  Connecting to the baseband CPU...
  00:07:17  Entering baseband CPU service mode...
  00:07:17  Detected chipset: DB2012
  00:07:17  Boot mode: EROM
  00:07:19  Initializing loader...
  00:07:19  Initializing GDFS access...
  00:07:42  Communicating with server…
E 00:07:46  Error: 0x07F5EFDA
E 00:07:46  Error: 0x05190628
E 00:07:46  Error: 0x54CF635C
E 00:07:46  Error: 0x07F5EFDA
E 00:07:46  Error: 0x28FF3CA4
E 00:07:46  Unknown server problem [129]
E 00:07:46  Failed!
! 00:07:46  Please disconnect battery and cable from the phone!
! 00:07:46  To report errors right-click this window

is there is any solution ???

thanks

mony_valley

[mony_valley]

i solve it with A1 fast java Unlocker choose W200 then as useual open extractor
but for me i do it twice
first time didnt unlock the phone
second time all is ok

but im still waiting for cruiser team to answer me about this errors

thanks

mony_valley

[FGB]

You entered in Erom mode,

You should enter in Boot-mode.

correct me someone, if i am wrong.

[mony_valley]

U r wrong

i connect using 2+5 not by holding C botton

Originally Posted by FGB

You entered in Erom mode,

You should enter in Boot-mode.

correct me someone, if i am wrong.

thanks

mony_valley

[FGB]

But your log says, your phone not connected into boot-rom mode.

[mony_valley]

thats first log in ultimate unlocker

what about the second log
its for full unlocker

what u think ????
still not connected into boot-rom mode

Originally Posted by FGB

But your log says, your phone not connected into boot-rom mode.

thanks

mony_valley

[y2y]

when u working with ultimate unlocker:

for db2012 use only fighter or uc-10 cable

for db2020 u can used both dcu-60 or fighter cable.

u can see it at manual.

[mony_valley]

i try with Fighter cable & with usb cable

& the same error

Originally Posted by y2y

when u working with ultimate unlocker:

for db2012 use only fighter or uc-10 cable

for db2020 u can used both dcu-60 or fighter cable.

u can see it at manual.

thanks

mony_valley

[john28]

selct model w200 and try it is working

[mony_valley]

http://forum.gsmhosting.com/vbb/show...41&postcount=3

Originally Posted by john28

selct model w200 and try it is working

thanks

mony_valley

[Black_Daimond]

I had same problem in W810 cid 50 and I did with Java Fast Unlocker choosing W200. After the second time, I got the phone unlocked, and phone lock code I got with Cruiser usind UC-10 Cable and selecting identify before connecting the phone.

Thanks to all!

[heera lal]

hello sir plz hellp me w810 phone

PHONE STATE: "UNKNOWN" [00000000]
SUPPORTED FLASH CID IS NOT DETECTED [0259]
skipping empty loader...
FAILED TO SETUP PHONE

[mojee]

I have cruiser dongle only can i use any cruiser software?