k510i flashing problem... - GSM-Forum

gsmsikar · 01-18-2007, 18:51

i have one k510i which was restarting automatically , so i tried to flash the set ...according to this method
-Atach phone
-RemoveRSA
-Flash MAIN+RAW(CID 49)
-Detach phone
-Atach phone
-Remove RSA
-Customize
-Shoot down FS
-Atach phone
-Restore FW]

but after flashing and doing all the options but while doing RESTORE FIRMWARE , it give error and stopped ...
and the set is dead ,
then when i try to flash it again , now it is giving error while flashing the Main ARM, it stops while flashing in the middle ..saying....

Error flashing block at address: 0x44590000
Script error: Flash error [10.08.75]

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRODUCTION_ID_LOADER P3H
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 49
Sending applet...
Applet ID: 060305 1000 104_DB2010_FLASHLOADER_P5G_CXC1326738
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Flash Main Firmware --- ]
Flash file: "K510i_CXC1250231_Generic_R4EA031_Red49.ck51sw "
Waiting for flash file to load...
Preparing to program flash...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...

please help me what to do ...
can i revive it with cruiser?

please help..

thanks

mily2 · 01-18-2007, 19:24

try this
battery must be very full

attach
unlock rsa
attach
flash raw fs
customize fs
flash main
thats all

gsmsikar · 01-18-2007, 20:16

Quote:

Originally Posted by mily2

try this
battery must be very full

attach
unlock rsa
attach
flash raw fs
customize fs
flash main
thats all

now i am unable to flash even the RAW FS...
what to do , while flashing it stops in the middle of the process

RGUY · 01-18-2007, 20:24

Try recovery method. If you full-flash your phone you don't need to Restore FW.

gsmsikar · 01-18-2007, 20:40

Quote:

Originally Posted by RGUY

Try recovery method. If you full-flash your phone you don't need to Restore FW.

what is that please explain it..
thanks

yasin_shafi · 01-19-2007, 20:13

Quote:

Originally Posted by gsmsikar

what is that please explain it..
thanks

Hi This Is The Complete Solution Worked For Me.

1.Attach Phone
2.Unlock RSA (Take Out Battery And Re-Insert It)
3.Attach Phone
4.Flash Main Arm With K510i_FullGDFS_Brown49.ck51sw File
5.Finalize GDFS
6.Detach Phone
7.Attach Phone
8.Flash Main Arm With
K510i_CXC1250231_Generic_R4CH003_Red49.ck51sw File
9.Flash Raw FS With
K510i_CXC1250246_Europe2_R4CH003_Red49.ck51fs File
10.Detach Phone
11.Attach Phone
12.Unlock RSA
13.Customise Phone
14.Shutdown FS
15.Restore Firmware

1 Of The Phones Then Got Stuck On "Please Wait" The Solution For This Is:

1.Attach Phone
2.Unlock RSA (Take Out Battery And Re-Insert It)
3.Attach Phone
4. Restore Firmware
5.Direct Unlock

Best Regards

Yasin

gsmsikar · 01-19-2007, 21:42

Quote:

Originally Posted by yasin_shafi

Hi This Is The Complete Solution Worked For Me.

1.Attach Phone
2.Unlock RSA (Take Out Battery And Re-Insert It)
3.Attach Phone
4.Flash Main Arm With K510i_FullGDFS_Brown49.ck51sw File
5.Finalize GDFS
6.Detach Phone
7.Attach Phone
8.Flash Main Arm With
K510i_CXC1250231_Generic_R4CH003_Red49.ck51sw File
9.Flash Raw FS With
K510i_CXC1250246_Europe2_R4CH003_Red49.ck51fs File
10.Detach Phone
11.Attach Phone
12.Unlock RSA
13.Customise Phone
14.Shutdown FS
15.Restore Firmware

1 Of The Phones Then Got Stuck On "Please Wait" The Solution For This Is:

1.Attach Phone
2.Unlock RSA (Take Out Battery And Re-Insert It)
3.Attach Phone
4. Restore Firmware
5.Direct Unlock

Best Regards

Yasin

thanks after all of the above process , the set was on then it stopped on Please wait...

then when i do direct unlock ... but it gives error ...

[ --- Direct Unlock --- ]
Defeating RSA protection...
Waiting for the phone to turn off...
Should the communication hang, reinsert battery.
Baudrate = 460800Bd
Sending applet prologue...
Sending applet body...
Waiting for acknowledge...
Defeating RSA protection...
Waiting for the phone to turn off...
Should the communication hang, reinsert battery.

No response
This may indicate damaged EROM area!
This seems pretty bad...

please help me ...

thanks

amirkaaal · 01-19-2007, 22:35

No response
This may indicate damaged EROM area!
This seems pretty bad...

if you have this problam first attach phone and unlock rsa than attach phone again raw fs and then customize fs and last again attach your phone write main flash i repair many phone in this case

Masud-GSM · 01-20-2007, 19:17

1. Attach Phone
2. Unlock RSA (Reinsert Battery)
3. Attach Phone
4. Direct Unlock (Reinsert Battery)
5. Attach Phone
6. Flash Raw FS
7. Customise FS
8. Shutdown FS (Reinsert Battery)
9. Attach Phone
10.Flash Main

Then flash done................
It's work's to me try this..........

gsmsikar · 01-23-2007, 07:21

can someone help me , i am unable to repair this phone with cruiser, all i can get at last is (PLEASE WAIT) ....
please help me out...

thanks

MUNEEB_AKHTAR_RAZA · 01-23-2007, 07:39

Bro first u have to b sure that u have a fulll charged battery in ur hand...And as far as "Plz Wait" prob lom concern......
Attach to phone
Unlock Rsa(Reinsert battery)
Flash Arm(with gdfs file)
Turnoff the Phone
Attach to Phone
Restore firmware
Direct Unlock!
Thats all....
Note:Its working solution as its always work for me...In case if this method not work then u have to b sure that u have used latest flash files for flashing this phone!If u still have prob plz post here!
Br
Muneeb Akhtar Raza

gsmsikar · 01-23-2007, 19:22

at last i recovered it using the dead USB-SMART....

thanks

uqbah · 01-23-2007, 20:33

i think cruiser have big prob with this model particularly i resolve same problem with dead usb smart ............
what s wrong with cruiser.............
they must work on that..
best regards
br khalid

gsmsikar · 01-24-2007, 07:05

the problem occured again today .. now the set is again restarting while working well..

could it be a hardware problem?

Masud-GSM · 01-24-2007, 08:56

Use update flash files and flash with Cruiser.................................

01-18-2007, 18:51	#1 (permalink)
gsmsikar No Life Poster Join Date: May 2003 Posts: 5,667 Member: 28004 Status: Offline Sonork: 100.1601142 Thanks Meter: 770	k510i flashing problem... i have one k510i which was restarting automatically , so i tried to flash the set ...according to this method -Atach phone -RemoveRSA -Flash MAIN+RAW(CID 49) -Detach phone -Atach phone -Remove RSA -Customize -Shoot down FS -Atach phone -Restore FW] but after flashing and doing all the options but while doing RESTORE FIRMWARE , it give error and stopped ... and the set is dead , then when i try to flash it again , now it is giving error while flashing the Main ARM, it stops while flashing in the middle ..saying.... Error flashing block at address: 0x44590000 Script error: Flash error [10.08.75] [ --- Attach to Phone --- ] Connecting via Fighter USB Cable... Powering on the phone... Baseband chip ID: 0x8040 Protocol version: 3.1 Baudrate = 460800Bd Sony Ericsson phone detected. Phone CID: 49 Phone color: Red Flash certificate: A1_DB2010_49_RED Trying Red CID49 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 1s Initializing phone hardware... Applet ID: 060206 1814 NPACXC125872_COMPACTPRODUCTION_ID_LOADER P3H Flash manufacturer: Intel Flash ID: 0x897E OTP Security Level: 1 (Retail) OTP CID: 49 Sending applet... Applet ID: 060305 1000 104_DB2010_FLASHLOADER_P5G_CXC1326738 RSA protection state cannot be determined for this CID. Phone hardware initialized OK [ --- Flash Main Firmware --- ] Flash file: "K510i_CXC1250231_Generic_R4EA031_Red49.ck51sw " Waiting for flash file to load... Preparing to program flash... Baudrate = 921600Bd The applet ignored baudrate change request! Programming flash... please help me what to do ... can i revive it with cruiser? please help.. thanks

01-23-2007, 20:33	#13 (permalink)
uqbah Cheater -Don't Deal with him- Join Date: Aug 2004 Location: MicroControllers:: Age: 43 Posts: 1,676 Member: 78619 Status: Offline Thanks Meter: 297	i did the same thing i think cruiser have big prob with this model particularly i resolve same problem with dead usb smart ............ what s wrong with cruiser............. they must work on that.. best regards br khalid

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
k510i flash problem	germany	Sony Ericsson	5	10-24-2007 22:23
K510i Flashing Problem ?????????????????	lahoot	Cruiser Suite	1	08-11-2007 17:13
k510i flashing problem plzzzz help	firrozkhan_00	Sony Ericsson Hardware Repair	0	08-03-2007 07:54
k510i flash problem	sak_sahin	Cruiser Suite	2	07-20-2007 14:58
se k510i flashing problem	...:::JamalMustafa:::...	Cruiser Suite	7	05-10-2007 14:33

01-18-2007, 19:24	#2 (permalink)
mily2 No Life Poster Join Date: Jun 2006 Location: Poland Posts: 915 Member: 290638 Status: Offline Thanks Meter: 50	try this battery must be very full attach unlock rsa attach flash raw fs customize fs flash main thats all

01-18-2007, 20:24	#4 (permalink)
RGUY Freak Poster Join Date: May 2006 Posts: 173 Member: 277942 Status: Offline Thanks Meter: 0	Try recovery method. If you full-flash your phone you don't need to Restore FW.

01-19-2007, 22:35	#8 (permalink)
amirkaaal Freak Poster Join Date: Oct 2006 Location: kamran mobile pakistan Posts: 235 Member: 378820 Status: Offline Thanks Meter: 8	No response This may indicate damaged EROM area! This seems pretty bad... if you have this problam first attach phone and unlock rsa than attach phone again raw fs and then customize fs and last again attach your phone write main flash i repair many phone in this case

01-20-2007, 19:17	#9 (permalink)
Masud-GSM No Life Poster Join Date: Nov 2006 Location: Eastern Plaza,Dhaka Bangladesh Posts: 1,272 Member: 396988 Status: Offline Sonork: 100.1613227 Thanks Meter: 182	1. Attach Phone 2. Unlock RSA (Reinsert Battery) 3. Attach Phone 4. Direct Unlock (Reinsert Battery) 5. Attach Phone 6. Flash Raw FS 7. Customise FS 8. Shutdown FS (Reinsert Battery) 9. Attach Phone 10.Flash Main Then flash done................ It's work's to me try this..........

01-23-2007, 07:21	#10 (permalink)
gsmsikar No Life Poster Join Date: May 2003 Posts: 5,667 Member: 28004 Status: Offline Sonork: 100.1601142 Thanks Meter: 770	can someone help me , i am unable to repair this phone with cruiser, all i can get at last is (PLEASE WAIT) .... please help me out... thanks

01-23-2007, 07:39	#11 (permalink)
MUNEEB_AKHTAR_RAZA No Life Poster Join Date: Jun 2005 Location: Timeless zone! Age: 35 Posts: 1,720 Member: 152244 Status: Offline Sonork: 100.1591179 Thanks Meter: 162	Bro first u have to b sure that u have a fulll charged battery in ur hand...And as far as "Plz Wait" prob lom concern...... Attach to phone Unlock Rsa(Reinsert battery) Flash Arm(with gdfs file) Turnoff the Phone Attach to Phone Restore firmware Direct Unlock! Thats all.... Note:Its working solution as its always work for me...In case if this method not work then u have to b sure that u have used latest flash files for flashing this phone!If u still have prob plz post here! Br Muneeb Akhtar Raza

01-23-2007, 19:22	#12 (permalink)
gsmsikar No Life Poster Join Date: May 2003 Posts: 5,667 Member: 28004 Status: Offline Sonork: 100.1601142 Thanks Meter: 770	at last i recovered it using the dead USB-SMART.... thanks

01-24-2007, 07:05	#14 (permalink)
gsmsikar No Life Poster Join Date: May 2003 Posts: 5,667 Member: 28004 Status: Offline Sonork: 100.1601142 Thanks Meter: 770	the problem occured again today .. now the set is again restarting while working well.. could it be a hardware problem?

01-24-2007, 08:56	#15 (permalink)
Masud-GSM No Life Poster Join Date: Nov 2006 Location: Eastern Plaza,Dhaka Bangladesh Posts: 1,272 Member: 396988 Status: Offline Sonork: 100.1613227 Thanks Meter: 182	Use update flash files and flash with Cruiser.................................