K800 to K810 convertion - Have anyone tried? - GSM-Forum

James_S · 04-03-2007, 21:53

Latest version supports "K800 to K810 convertion".

How is that done? Only simply flashing K810 firmware to a K800? Is it easy to convert it back?

What is the difference between K810/K800?

danned · 04-04-2007, 16:54

Come on Lead !! or Mizar ?

There is no new help guide out so give us some information.

How to convert K800i to K810i ?

Its not much asking for when you announce it loud in the info why not GIVE SOME INFO ABOUT IT ?

Is only flashing required or ? I dont want to make a mess of my DB2020 phone.

Best regards Daniel

hridaya · 04-28-2007, 20:45

i have just tried
1 flash the phone with k810 arm,raw
2 customize like k810
3 that's all - works

tested on my phone

bassmc · 04-29-2007, 12:41

2 leds off after flash on keypad.

b2k · 04-29-2007, 13:03

Yes, but what is more strange when in camera mode the other leds are lighting, but still in any mode side leds are not working :/

mccm · 05-19-2007, 19:50

can input what are the changes ?

asap

masterkiko · 05-28-2007, 23:46

I want to convert k800 to k810 but i want to know what is the different
between us? can any one help me/

thx from krikor

masterkiko · 05-29-2007, 00:06

what change??? in k801

masterkiko · 05-29-2007, 00:08

sorry k810 what change?

cheong966 · 05-29-2007, 03:09

(1) Attach Phone
(2) Modify GDFS - modify cid49 to cid52.
(3) Customize File System - 1 credit uesd
(4) Detach Phone
(5) Reattach Phone
- on this time your phone cid49 was changed to cid52
(6) Flash Main Firmware - flash SE K810i Red52 main firmware.
(7) Flash Raw File System - flash SE K810i Red52 FS firmware.
(8) Customize File System - 1 credit uesd
(9) DONE

System diagnostics passed.
Version 10.42 alpha ready!

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x9900
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Trying CID52 recovery applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 2s
Initializing phone hardware...
Applet ID: 061220 1711 NPA4_CXC1329130_DB2020_...
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 49
Phone CID: 49
Phone color: Red
Sending applet...
Applet ID: 060721 1022 HANCXC1329129_DB2020_FL...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Modify GDFS --- ]
Sending CS applet...
Applet ID: 061027 1723 HANCXC1250562_DB2020_CS...
Initializing CS applet...
Applet ID: 061027 1723 HANCXC1250562_DB2020_CS...
Baudrate = 921600Bd
Starting up GDFS service...
Connecting to server...
Connection established, checking server status...
Server version: 2.07
Generating witness...
Your ID: user_38BD7DED
Number of preceding users: 0
Credit: 2
Received successfully.
Calculating unlock data...
Received successfully.
Time: 00:00:03
Upgrading to CID52...
Done.

[ --- Customize File System --- ]
Starting up filesystem, please wait...
Building customization...
Customizing phone...
Done.
Writing CDA Article MS string...
New value: CDA102568/10
Done.
Writing CDA Version MS string...
New value: R2A
Done.
Writing Default Article MS string...
New value: cxc1250490
Done.
Writing Default Version MS string...
New value: R1JG001
Done.
Writing langpack string...
New value: EUROPE_1
Done.
Writing country...
New value: Generic Trade
Done.

[ --- Detach Phone --- ]
Terminating threads...
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x9900
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Trying CID52 recovery applet...
Sending applet prologue...
Time spent entering bootstrap: 0s
Unsupported flash certificate
Terminating threads...
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x9900
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Trying CID52 recovery applet...
Time spent entering bootstrap: 0s
Unsupported flash certificate
Terminating threads...
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x9900
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Trying CID52 recovery applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 2s
Initializing phone hardware...
Applet ID: 061220 1711 NPA4_CXC1329130_DB2020_...
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 49
Phone CID: 52
Phone color: Red
Sending applet...
Applet ID: 061201 1314 HANCXC1329129_DB2020_FL...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Flash Main Firmware --- ]

[ --- Flash Main Firmware --- ]

[ --- Flash Main Firmware --- ]

[ --- Flash Main Firmware --- ]
Flash file: "K810c_CXC1250904_China_R1KC001_Red52.ck81sw"
Waiting for flash file to load...
Preparing to program flash...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...
Time: 00:11:54
Flash process done.

[ --- Flash Raw File System --- ]
Flash file: "K810i_CXC1250813_APAC_R1KC001_Red52.ck81fs"
Waiting for flash file to load...
Preparing to program flash...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...
Time: 00:06:19
Flash process done.

[ --- Customize File System --- ]
Sending CS applet...
Applet ID: 070125 1328 GENCXC1250562_DB2020_CS...
Initializing CS applet...
Applet ID: 070125 1328 GENCXC1250562_DB2020_CS...
Baudrate = 921600Bd
Starting up GDFS service...
Starting up filesystem, please wait...
Connecting to server...
Connection established, checking server status...
Server version: 2.07
Generating witness...
Your ID: user_38BD7DED
Number of preceding users: 0
Credit: 1
Received successfully.
Calculating unlock data...
Received successfully.
Time: 00:00:03
Building customization...
Customizing phone...
Done.
Writing CDA Article MS string...
New value: CDA102568/101
Done.
Writing CDA Version MS string...
New value: R7A
Done.
Writing Default Article MS string...
New value: cxc1250813
Done.
Writing Default Version MS string...
New value: R1JG001
Done.
Writing langpack string...
New value: APAC
Done.
Writing country...
New value: Generic Trade
Done.

[ --- Turn off Phone --- ]
Turning off phone...
Phone turned off.
Phone automatically detached.
Connecting via Fighter USB Cable...
Connecting to server...
Connection established, checking server status...
Server version: 2.07
Retrieving credit info...
Your ID: user_38BD7DED
Credit: 0
Time: 00:00:00

BuMobiles · 06-30-2007, 11:05

the only thing different with a k810i to a k800i

1, face lift
2, improved software and menu's
3, updated graphics on phone menu and sub system

BuMobiles · 06-30-2007, 11:07

if you are wanting to convert a k800i to k810i

just flash the k810i firmware onto a k800i

any problems just change the cid from 49/51 to 52

then reflash.

haven't tried changing the housing yet, but will try and post results!

rowin · 07-17-2007, 23:19

there is no need to change cid when flashing k810 firm into k800.

just unlock RSA and then flash it with any cid firm. and costumize. it cost only 1 credit.

mccm · 07-18-2007, 06:12

any inprovement in the camera function ?

grts · 07-18-2007, 13:35

Quote:

Originally Posted by mccm

any inprovement in the camera function ?

no serious change has this updatejust the menu is little more faster than 800but you lose 2 leds on keyboard and you have to modified the only difference is the slimest cover

greg

04-03-2007, 21:53	#1 (permalink)
James_S No Life Poster Join Date: Jan 2005 Age: 54 Posts: 1,726 Member: 105625 Status: Offline Thanks Meter: 44	K800 to K810 convertion - Have anyone tried? Latest version supports "K800 to K810 convertion". How is that done? Only simply flashing K810 firmware to a K800? Is it easy to convert it back? What is the difference between K810/K800?

04-29-2007, 12:41	#4 (permalink)
bassmc Insane Poster Join Date: Jul 2003 Location: crivitz city - germany Posts: 63 Member: 35533 Status: Offline Sonork: 100.111990 Thanks Meter: 58	two leds off 2 leds off after flash on keypad.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Converting k800 to K810	~Optimus_Prime~	Sony Ericsson Hardware Repair	2	02-09-2010 01:44
it possible convert from K800 to K810	dexter_mn	DreamBox	1	05-07-2008 17:57
Have anyone tried to unlock K850?	James_S	Universalbox	6	11-15-2007 02:38
Have Anyone tried using UNLOCK BY SMART TESTPOINT?	edong	Smart-Clip	14	10-15-2007 09:26

04-04-2007, 16:54	#2 (permalink)
danned Freak Poster Join Date: Dec 2002 Posts: 291 Member: 18369 Status: Offline Thanks Meter: 3	Come on Lead !! or Mizar ? There is no new help guide out so give us some information. How to convert K800i to K810i ? Its not much asking for when you announce it loud in the info why not GIVE SOME INFO ABOUT IT ? Is only flashing required or ? I dont want to make a mess of my DB2020 phone. Best regards Daniel

04-28-2007, 20:45	#3 (permalink)
hridaya No Life Poster Join Date: Oct 2001 Location: RO Age: 48 Posts: 686 Member: 6738 Status: Offline Sonork: 100.81405 Thanks Meter: 10	i have just tried 1 flash the phone with k810 arm,raw 2 customize like k810 3 that's all - works tested on my phone

04-29-2007, 13:03	#5 (permalink)
b2k Freak Poster Join Date: Mar 2004 Location: VoiD Posts: 276 Member: 59737 Status: Offline Sonork: 100.1603188 Thanks Meter: 18	Yes, but what is more strange when in camera mode the other leds are lighting, but still in any mode side leds are not working :/

05-19-2007, 19:50	#6 (permalink)
mccm No Life Poster Join Date: Aug 2005 Location: singapore Age: 55 Posts: 2,430 Member: 173565 Status: Offline Thanks Meter: 71	can input what are the changes ? asap

05-28-2007, 23:46	#7 (permalink)
masterkiko Junior Member Join Date: May 2007 Posts: 3 Member: 517677 Status: Offline Thanks Meter: 0	I want to convert k800 to k810 but i want to know what is the different between us? can any one help me/ thx from krikor

05-29-2007, 00:06	#8 (permalink)
masterkiko Junior Member Join Date: May 2007 Posts: 3 Member: 517677 Status: Offline Thanks Meter: 0	what change??? in k801

05-29-2007, 00:08	#9 (permalink)
masterkiko Junior Member Join Date: May 2007 Posts: 3 Member: 517677 Status: Offline Thanks Meter: 0	sorry k810 what change?

05-29-2007, 03:09	#10 (permalink)
cheong966 Freak Poster Join Date: Jul 2005 Location: Malaysia Posts: 227 Member: 157312 Status: Offline Thanks Meter: 72	(1) Attach Phone (2) Modify GDFS - modify cid49 to cid52. (3) Customize File System - 1 credit uesd (4) Detach Phone (5) Reattach Phone - on this time your phone cid49 was changed to cid52 (6) Flash Main Firmware - flash SE K810i Red52 main firmware. (7) Flash Raw File System - flash SE K810i Red52 FS firmware. (8) Customize File System - 1 credit uesd (9) DONE System diagnostics passed. Version 10.42 alpha ready! [ --- Attach to Phone --- ] Connecting via Fighter USB Cable... Powering on the phone... Baseband chip ID: 0x9900 Protocol version: 3.1 Baudrate = 460800Bd Booting via ROM... Trying CID52 recovery applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 2s Initializing phone hardware... Applet ID: 061220 1711 NPA4_CXC1329130_DB2020_... Flash manufacturer: Intel Flash ID: 0x897E OTP Security Level: 1 (Retail) OTP CID: 49 Phone CID: 49 Phone color: Red Sending applet... Applet ID: 060721 1022 HANCXC1329129_DB2020_FL... RSA protection state cannot be determined for this CID. Phone hardware initialized OK [ --- Modify GDFS --- ] Sending CS applet... Applet ID: 061027 1723 HANCXC1250562_DB2020_CS... Initializing CS applet... Applet ID: 061027 1723 HANCXC1250562_DB2020_CS... Baudrate = 921600Bd Starting up GDFS service... Connecting to server... Connection established, checking server status... Server version: 2.07 Generating witness... Your ID: user_38BD7DED Number of preceding users: 0 Credit: 2 Received successfully. Calculating unlock data... Received successfully. Time: 00:00:03 Upgrading to CID52... Done. [ --- Customize File System --- ] Starting up filesystem, please wait... Building customization... Customizing phone... Done. Writing CDA Article MS string... New value: CDA102568/10 Done. Writing CDA Version MS string... New value: R2A Done. Writing Default Article MS string... New value: cxc1250490 Done. Writing Default Version MS string... New value: R1JG001 Done. Writing langpack string... New value: EUROPE_1 Done. Writing country... New value: Generic Trade Done. [ --- Detach Phone --- ] Terminating threads... All threads terminated. [ --- Attach to Phone --- ] Connecting via Fighter USB Cable... Powering on the phone... Baseband chip ID: 0x9900 Protocol version: 3.1 Baudrate = 460800Bd Booting via ROM... Trying CID52 recovery applet... Sending applet prologue... Time spent entering bootstrap: 0s Unsupported flash certificate Terminating threads... All threads terminated. [ --- Attach to Phone --- ] Connecting via Fighter USB Cable... Powering on the phone... Baseband chip ID: 0x9900 Protocol version: 3.1 Baudrate = 460800Bd Booting via ROM... Trying CID52 recovery applet... Time spent entering bootstrap: 0s Unsupported flash certificate Terminating threads... All threads terminated. [ --- Attach to Phone --- ] Connecting via Fighter USB Cable... Powering on the phone... Baseband chip ID: 0x9900 Protocol version: 3.1 Baudrate = 460800Bd Booting via ROM... Trying CID52 recovery applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 2s Initializing phone hardware... Applet ID: 061220 1711 NPA4_CXC1329130_DB2020_... Flash manufacturer: Intel Flash ID: 0x897E OTP Security Level: 1 (Retail) OTP CID: 49 Phone CID: 52 Phone color: Red Sending applet... Applet ID: 061201 1314 HANCXC1329129_DB2020_FL... RSA protection state cannot be determined for this CID. Phone hardware initialized OK [ --- Flash Main Firmware --- ] [ --- Flash Main Firmware --- ] [ --- Flash Main Firmware --- ] [ --- Flash Main Firmware --- ] Flash file: "K810c_CXC1250904_China_R1KC001_Red52.ck81sw" Waiting for flash file to load... Preparing to program flash... Baudrate = 921600Bd The applet ignored baudrate change request! Programming flash... Time: 00:11:54 Flash process done. [ --- Flash Raw File System --- ] Flash file: "K810i_CXC1250813_APAC_R1KC001_Red52.ck81fs" Waiting for flash file to load... Preparing to program flash... Baudrate = 921600Bd The applet ignored baudrate change request! Programming flash... Time: 00:06:19 Flash process done. [ --- Customize File System --- ] Sending CS applet... Applet ID: 070125 1328 GENCXC1250562_DB2020_CS... Initializing CS applet... Applet ID: 070125 1328 GENCXC1250562_DB2020_CS... Baudrate = 921600Bd Starting up GDFS service... Starting up filesystem, please wait... Connecting to server... Connection established, checking server status... Server version: 2.07 Generating witness... Your ID: user_38BD7DED Number of preceding users: 0 Credit: 1 Received successfully. Calculating unlock data... Received successfully. Time: 00:00:03 Building customization... Customizing phone... Done. Writing CDA Article MS string... New value: CDA102568/101 Done. Writing CDA Version MS string... New value: R7A Done. Writing Default Article MS string... New value: cxc1250813 Done. Writing Default Version MS string... New value: R1JG001 Done. Writing langpack string... New value: APAC Done. Writing country... New value: Generic Trade Done. [ --- Turn off Phone --- ] Turning off phone... Phone turned off. Phone automatically detached. Connecting via Fighter USB Cable... Connecting to server... Connection established, checking server status... Server version: 2.07 Retrieving credit info... Your ID: user_38BD7DED Credit: 0 Time: 00:00:00

06-30-2007, 11:05	#11 (permalink)
BuMobiles No Life Poster Join Date: May 2007 Location: UK Posts: 1,519 Member: 503346 Status: Offline Thanks Meter: 2,582	the only thing different with a k810i to a k800i 1, face lift 2, improved software and menu's 3, updated graphics on phone menu and sub system

06-30-2007, 11:07	#12 (permalink)
BuMobiles No Life Poster Join Date: May 2007 Location: UK Posts: 1,519 Member: 503346 Status: Offline Thanks Meter: 2,582	if you are wanting to convert a k800i to k810i just flash the k810i firmware onto a k800i any problems just change the cid from 49/51 to 52 then reflash. haven't tried changing the housing yet, but will try and post results!

07-17-2007, 23:19	#13 (permalink)
rowin Major Poster Join Date: Oct 2006 Posts: 45 Member: 370069 Status: Offline Thanks Meter: 4	there is no need to change cid when flashing k810 firm into k800. just unlock RSA and then flash it with any cid firm. and costumize. it cost only 1 credit.

07-18-2007, 06:12	#14 (permalink)
mccm No Life Poster Join Date: Aug 2005 Location: singapore Age: 55 Posts: 2,430 Member: 173565 Status: Offline Thanks Meter: 71	any inprovement in the camera function ?