W550i DEAD NOW WHITE SCREEN

[jamohaki]

i have w550i brought to me dead after reading some post here on how to revive now phone power on but screen is white,again i searched i found many posts regarding how to repair white screen i tried but problem remain.anyone who can help please with 100% solution?

[BENCHENA]

Originally Posted by jamohaki

i have w550i brought to me dead after reading some post here on how to revive now phone power on but screen is white,again i searched i found many posts regarding how to repair white screen i tried but problem remain.anyone who can help please with 100% solution?

You should just Flash your phone

BR BENCHENA

[jamohaki]

i said i flashed with different steps that are posted here in the forum but problem remain,my phone is cid 49 brown,another thing many posts says first must unlock rsa but in my case rsa button is not activated,why?

[adez28]

Hello.
Mate - I have done LOTS of W550i with white screens and DEAD.
I follow the CRUISER videos available on the Cruiser download site.
They work 100%!!!!
There are TWO - download them both and follow exactly.
Use the files that they use too.
It has worked for me every time.
Good luck.
adez28.

[adez28]

Hello again.
I just thought - check the phone for water damage.
many of these get affected by water/damp.
Especially where the charger block is.
Remove the top cover, below joystick is a little sticker, this should be WHITE. There is also another inside the case, near charging block. If they are RED = water damage.
I use an ultrasonic cleaner to try to clean water damage. This is not 100% fix, sometimes it wont work.
Take a look.
adez28.

[jamohaki]

i have checked the video but my phone is cid 49 brown and the instructions in the video is showing cid 49 red still i tried the method but not work.any other ideas?

[adez28]

Hello.
Have you checked for water damage like I said???
Brown CID I would think means someone has either tried to flash it or unlock it before (badly!!!)
Anyway, you can replace certificate with a red one under security tab (convert back to red.)
It may be easier if you post a log of what happens when you try the procedure and put it on here for us to have a look at mate.
Do you have USB SMART????
That can be quite handy for telling you if a phone has been badly unlocked by another tool - cruser can too I believe.
You haven't tried to do a recovery boot and repair certificate have you???
That will equal one dead phone as CID 49 phones get a damaged EROM from this procedure.
If all else fails, lower the baudrate to lowest speed, uncheck retrieve more info box and manually select W550i in the box before attaching the phone.
The flash procedure I said about works mate.
You may need to use testpoint.
adez28.

[BENCHENA]

Originally Posted by jamohaki

i said i flashed with different steps that are posted here in the forum but problem remain,my phone is cid 49 brown,another thing many posts says first must unlock rsa but in my case rsa button is not activated,why?

check your battery and check watter damage it's may be hardware problem

BR BENCHENA