W610i dead after unlocking/flashing

[Jazz]

Just tried to unlock this W-610i that is locked to Comcel from Columbia, but now when you turn it on you see a white screen momentarily (along with vibrating for half a second) and then nothing.

I have tried different flash files, but nothing.

System diagnostics passed.
Version 13.02 ready!
Do NOT connect the phone at this time!

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x9900
Protocol version: 3.1
Booting via EROM...
Sony Ericsson phone detected.
Phone CID: 52
Phone color: Red
EROM version: R3A022
Trying CID52 recovery applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Applet ID: 061220 1711 NPA4_CXC1329130_DB2020_...
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 51
Phone CID: 52
Phone color: Red
Sending applet...
Applet ID: 061205 1523 HANCXC9876543210_DB2020...
Sending applet...
Applet ID: 061201 1314 HANCXC1329129_DB2020_FL...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Unlock RSA --- ]
Preparing to program flash...
Programming flash...
Time: 00:00:22
Flash process done.
Preparing to program flash...
Programming flash...
Time: 00:00:03
Flash process done.
Sending CS applet...
Applet ID: 070410 1557 HANCXC1250562_DB2020_CS...
Initializing CS applet...
Starting up GDFS service...
Starting up filesystem, please wait...
Removing RSA lock...
Restarting phone...
Connect the phone while holding its C button!
Sending applet...
Sending applet prologue...
Sending applet body...
Applet ID: 061220 1711 NPA4_CXC1329130_DB2020_...
Sending applet...
Applet ID: 061201 1314 HANCXC1329129_DB2020_FL...
Preparing to program flash...
Programming flash...
Time: 00:03:25
Flash process done.
Please disconnect the phone and reinsert its battery!
Connect the phone while holding its C button!
Waiting for acknowledge...
Please disconnect the phone and reinsert its battery!
Connect the phone while holding its C button!
Sending applet prologue...
Sending applet body...
Waiting for acknowledge...
Applet ID: 070516 0311 CRU4_CXC1329130_DB2020_...
Sending applet...
Applet ID: 070516 0201 CRUCXC1329134_DB2020_PR...
Done.

[ --- Flash Main Firmware --- ]
Flash file: "W610i_CXC1250747_Generic_R1JD001_Red52.cw61sw "
Waiting for flash file to load...
Preparing to program flash...
Programming flash...
Time: 00:03:49
Flash process done.

[ --- Flash Raw File System --- ]
Flash file: "W610a_CXC1250755_America2_R1JD001_Red52.cw61f s"
Waiting for flash file to load...
Preparing to program flash...
Programming flash...
Time: 00:01:26
Flash process done.

[ --- Direct Unlock --- ]
Analyzing firmware...
Preparing for direct unlock...
Processing...
Status: Success [O]
Creating firmware backup file...
Preparing to program flash...
Programming flash...
Time: 00:00:02
Flash process done.
If the phone cannot be turned on anymore, report its type and firmware version.
Starting up GDFS service...
Unlocking phone...
Recalculating CRCs...
Done.

[ --- Customize File System --- ]
Sending CS applet...
Applet ID: 061114 0304 CRUCXC1250562_DB2020_CS...
Initializing CS applet...
Starting up GDFS service...
Starting up filesystem, please wait...
Building customization...
Customizing phone...
Done.
Writing CDA Article MS string...
New value: CDA102568/107
Done.
Writing CDA Version MS string...
New value: R3A
Done.
Writing Default Article MS string...
New value: cxc1250755
Done.
Writing Default Version MS string...
New value: R6CA001
Done.
Writing langpack string...
New value: AMERICA_2
Done.
Writing country...
New value: Generic Trade
Done.

[ --- Turn off Phone --- ]
Turning off phone...
Phone turned off.
Phone automatically detached.

Any other suggestions?

Thanks in advance.

[~Leo~]

reflash main firmware &Post results &USe search for Steps about unlocking & Flashing

[Jazz]

Originally Posted by ~AhmedLeopard~

reflash main firmware &Post results &USe search for Steps about unlocking & Flashing

Can you be more specific?

I have used this method of unlocking & Flashing many times without any problems. I have also searched to see if there was anything specific about this model (which I did not see anything).

Finally, I have also noted that I have tried different flash files all which gave the same end-result.

Any other suggestions.

Thanks in advance.