W800i & K750i DEAD! Please help! - GSM-Forum

UnlockBR · 07-26-2006, 20:48

Hello,

I received 2 phones (a W800i and a K750i) totally dead.

Not sure what happened to the phones before.

K750i
Settings: 115200, Recovery boot, CID=36

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Phone automatically detached.
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 115200Bd
Trying CID36 recovery applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 3s
Initializing phone hardware...
Applet ID: 041213 1452 MATCXC1326739_COMPACTCERTLOADER R2L
Flash manufacturer: ST Microelectronics
Flash ID: 0x200D
OTP Security Level: 1 (Retail)
OTP CID: 36
Analyzing RSA protection...
RSA protection is normal.
Phone hardware initialized OK

[ --- Repair Certificate --- ]
Preparing to program flash...
Programming flash...

Applet error: 99 00 00 00 00 44
Error flashing block at address: 0x00000000
Script error: Flash error [9.74.75]

W800i

NO RESPONSE!!!

Any help welcome!!

BR,

UnlockBR

Gerti · 07-26-2006, 21:01

You can flash with Usb-Smart without any problem,just write full flash and complety phone.

karabey · 07-26-2006, 22:14

Try other Flash Versions... If not write here.. i will help you!

UnlockBR · 07-26-2006, 22:22

Quote:

Originally Posted by Gerti

You can flash with Usb-Smart without any problem,just write full flash and complety phone.

Are you sure? I don't think so...

Recover certificate
Switch phone ON
ERROR: 304107

karabey · 07-26-2006, 22:28

Did you try another Version Flash File?

UnlockBR · 07-26-2006, 22:33

How can I flash if I cannot even Recover certificate?????????

karabey · 07-26-2006, 22:39

Go to Normal Boot

1. Replace Certificate
2. Repair Erom
3. Full Flash

Crazy_ratata · 07-26-2006, 23:21

If it still fails then try 9 voltage instead of normal 3

That should help if flash ic is faulty

wbr

UnlockBR · 07-27-2006, 14:26

Thanks for replying...

Didn't helped...

Only connected using recovery boot...

Even using 9v.

And only K750i shows signal...

Any other advice?

wbr

Crazy_ratata · 07-27-2006, 14:38

Quote:

Originally Posted by UnlockBR

Thanks for replying...

Didn't helped...

Only connected using recovery boot...

Even using 9v.

And only K750i shows signal...

Any other advice?

wbr

Connect in recovery boot --> Repair certificate

Try agin

If it dosn't help add me to messenger

EDIT: My msn addy is [email protected]

UnlockBR · 07-27-2006, 14:44

Then I get error msg as posted at 1st msg

[ --- Repair Certificate --- ]
Preparing to program flash...
Programming flash...

Applet error: 99 00 00 00 00 44
Error flashing block at address: 0x00000000
Script error: Flash error [9.74.75]

..::M-GSM::.. · 07-27-2006, 14:49

try do i step attach fon 1 time
that means

attach fon than unlock RSA turn off fon
attach fon flash FS turn off fon
attach fon custermize turn off fon
attach fon flash main file and turn off fon

try it

UnlockBR · 07-27-2006, 15:22

Phone don't attach at normal mode. Only recovery. So this options are not avaiable...

Just some more info
there is no water signal at w800i.

just called and found that:

W800i Customer says that that happened after a fall down
K750i Customer says that he was with the phone conneceted to PC (maybe transferring SEUS data, not sure he won't tell me) and hanged

07-26-2006, 20:48	#1 (permalink)
UnlockBR No Life Poster Join Date: Apr 2003 Location: Sao Paulo - BRAZIL Age: 49 Posts: 1,512 Member: 26751 Status: Offline Thanks Meter: 2	W800i & K750i DEAD! Please help! Hello, I received 2 phones (a W800i and a K750i) totally dead. Not sure what happened to the phones before. K750i Settings: 115200, Recovery boot, CID=36 [ --- Attach to Phone --- ] Connecting via Fighter USB Cable... Phone automatically detached. Powering on the phone... Baseband chip ID: 0x8040 Protocol version: 3.1 Baudrate = 115200Bd Trying CID36 recovery applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 3s Initializing phone hardware... Applet ID: 041213 1452 MATCXC1326739_COMPACTCERTLOADER R2L Flash manufacturer: ST Microelectronics Flash ID: 0x200D OTP Security Level: 1 (Retail) OTP CID: 36 Analyzing RSA protection... RSA protection is normal. Phone hardware initialized OK [ --- Repair Certificate --- ] Preparing to program flash... Programming flash... Applet error: 99 00 00 00 00 44 Error flashing block at address: 0x00000000 Script error: Flash error [9.74.75] W800i NO RESPONSE!!! Any help welcome!! BR, UnlockBR

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sony ericsson k750i dead, please help me revive	frontech	Sony Ericsson	8	03-13-2009 19:08
D750i @ K750i or W800i both white display please help!!!	oOXTCOo	SonyEricsson (USB-Smart)	16	01-26-2009 09:50
K750i Dead Please Help	yaesu777	Sony Ericsson Hardware Repair	10	07-25-2007 10:34
K750i dead, please help!	mosh2011	Sony Ericsson Hardware Repair	3	06-13-2006 15:14
another k750i dead please help	wbiz10	SonyEricsson (USB-Smart)	2	09-13-2005 22:27

07-26-2006, 21:01	#2 (permalink)
Gerti No Life Poster Join Date: Apr 2005 Location: Albania Posts: 1,049 Member: 137489 Status: Offline Thanks Meter: 68	You can flash with Usb-Smart without any problem,just write full flash and complety phone.

07-26-2006, 22:14	#3 (permalink)
karabey No Life Poster Join Date: Nov 2003 Age: 42 Posts: 1,055 Member: 45183 Status: Offline Thanks Meter: 474	Try other Flash Versions... If not write here.. i will help you!

07-26-2006, 22:28	#5 (permalink)
karabey No Life Poster Join Date: Nov 2003 Age: 42 Posts: 1,055 Member: 45183 Status: Offline Thanks Meter: 474	Did you try another Version Flash File?

07-26-2006, 22:33	#6 (permalink)
UnlockBR No Life Poster Join Date: Apr 2003 Location: Sao Paulo - BRAZIL Age: 49 Posts: 1,512 Member: 26751 Status: Offline Thanks Meter: 2	How can I flash if I cannot even Recover certificate?????????

07-26-2006, 22:39	#7 (permalink)
karabey No Life Poster Join Date: Nov 2003 Age: 42 Posts: 1,055 Member: 45183 Status: Offline Thanks Meter: 474	Go to Normal Boot 1. Replace Certificate 2. Repair Erom 3. Full Flash

07-26-2006, 23:21	#8 (permalink)
Crazy_ratata No Life Poster Join Date: May 2005 Location: Denmark Age: 42 Posts: 1,399 Member: 146369 Status: Offline Thanks Meter: 119	If it still fails then try 9 voltage instead of normal 3 That should help if flash ic is faulty wbr

07-27-2006, 14:26	#9 (permalink)
UnlockBR No Life Poster Join Date: Apr 2003 Location: Sao Paulo - BRAZIL Age: 49 Posts: 1,512 Member: 26751 Status: Offline Thanks Meter: 2	Thanks for replying... Didn't helped... Only connected using recovery boot... Even using 9v. And only K750i shows signal... Any other advice? wbr

07-27-2006, 14:44	#11 (permalink)
UnlockBR No Life Poster Join Date: Apr 2003 Location: Sao Paulo - BRAZIL Age: 49 Posts: 1,512 Member: 26751 Status: Offline Thanks Meter: 2	Then I get error msg as posted at 1st msg [ --- Repair Certificate --- ] Preparing to program flash... Programming flash... Applet error: 99 00 00 00 00 44 Error flashing block at address: 0x00000000 Script error: Flash error [9.74.75]

07-27-2006, 14:49	#12 (permalink)
..::M-GSM::.. No Life Poster Join Date: May 2005 Location: malaysia Age: 40 Posts: 1,619 Member: 149041 Status: Offline Sonork: 100.114578 Thanks Meter: 61	try do i step attach fon 1 time that means attach fon than unlock RSA turn off fon attach fon flash FS turn off fon attach fon custermize turn off fon attach fon flash main file and turn off fon try it

07-27-2006, 15:22	#13 (permalink)
UnlockBR No Life Poster Join Date: Apr 2003 Location: Sao Paulo - BRAZIL Age: 49 Posts: 1,512 Member: 26751 Status: Offline Thanks Meter: 2	Phone don't attach at normal mode. Only recovery. So this options are not avaiable... Just some more info there is no water signal at w800i. just called and found that: W800i Customer says that that happened after a fall down K750i Customer says that he was with the phone conneceted to PC (maybe transferring SEUS data, not sure he won't tell me) and hanged