plz mr willy - GSM-Forum

mahmoud · 09-29-2002, 14:42

i need your help in some qoustions plz
1- how can i replace PA and antenna switch , and resolder it again .
2- what is the steps Of flashind alcatel DB by andromeda

thanx MR

willy · 09-29-2002, 14:48

mahmoud
Replace a parts .....

i used Hakko 850, to set air 6, heater 5, no install any nozzle !
then clean all tin in PCB, and put flux in PA , then put it back , and same setting for hot air . how you remove, same way you install back to PCB !

Antenna switch , 3 and 2.5 enough (151) !

Willy

mahmoud · 09-29-2002, 15:12

MR WILLY
YOU MEAN I CAN PICK UP AND PUT IT AGAIN BY HEATING
300C REAGHT ?

willy · 09-29-2002, 16:00

Matmoud,

300C, you might heat it so long time

what is way your remove parts, it is same way you install too !

Willy

mahmoud · 09-29-2002, 18:40

THANX MR WILLY SOO MUCH
BEST REGARDS
MAHMOUD

09-29-2002, 14:42	#1 (permalink)
mahmoud Crazy Poster Join Date: Jun 2002 Location: palestine Age: 46 Posts: 57 Member: 13336 Status: Offline Thanks Meter: 0	plz mr willy i need your help in some qoustions plz 1- how can i replace PA and antenna switch , and resolder it again . 2- what is the steps Of flashind alcatel DB by andromeda thanx MR

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mr.Willy please help 5110 no signal	uwenk98	Nokia Hardware & Hardware Repair	6	01-13-2003 13:28
Mr Willy, 8210 no signal	Black-Axe	Nokia Hardware & Hardware Repair	2	12-04-2002 02:11
TO MR. WILLY 3310 again	baraka42	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	10	11-27-2002 11:23
mr willy plz help	mahmoud	Nokia Hardware & Hardware Repair	1	10-28-2002 04:37
To mr. willy and all hardware master	baraka42	Nokia Hardware & Hardware Repair	0	10-18-2002 05:51

09-29-2002, 14:48	#2 (permalink)
willy No Life Poster Join Date: Mar 2000 Location: inside NOKIA phone Age: 58 Posts: 1,677 Member: 1060 Status: Offline Thanks Meter: 10	mahmoud Replace a parts ..... i used Hakko 850, to set air 6, heater 5, no install any nozzle ! then clean all tin in PCB, and put flux in PA , then put it back , and same setting for hot air . how you remove, same way you install back to PCB ! Antenna switch , 3 and 2.5 enough (151) ! Willy

09-29-2002, 15:12	#3 (permalink)
mahmoud Crazy Poster Join Date: Jun 2002 Location: palestine Age: 46 Posts: 57 Member: 13336 Status: Offline Thanks Meter: 0	MR WILLY YOU MEAN I CAN PICK UP AND PUT IT AGAIN BY HEATING 300C REAGHT ?

09-29-2002, 16:00	#4 (permalink)
willy No Life Poster Join Date: Mar 2000 Location: inside NOKIA phone Age: 58 Posts: 1,677 Member: 1060 Status: Offline Thanks Meter: 10	Matmoud, 300C, you might heat it so long time what is way your remove parts, it is same way you install too ! Willy

09-29-2002, 18:40	#5 (permalink)
mahmoud Crazy Poster Join Date: Jun 2002 Location: palestine Age: 46 Posts: 57 Member: 13336 Status: Offline Thanks Meter: 0	THANX MR WILLY SOO MUCH BEST REGARDS MAHMOUD