UFC suggested improvements - GSM-Forum

d_bug · 01-27-2009, 02:49

Just got my brandnew cable today and already have some little trouble with this nice cable set.

First, i cannot get any connection with any phone with any connector - finally after more minutes of tweaking, found out that RJ45 connector to my UFS is loose and not meshing well, i tried holding it while connecting to the phone and voila!!! i got a response, but i can't do this everytime i have something to work with so i decided to replace the connector from one of my "old" unused RJ45 connector and all works well.

Second, factory workers seems to be sleeping while doing this and resistors got swapped and different from the one indicated on the selector switch. I have to do this modification to get the right reading from RJ45 pin3 to green grabber clip:

And third, pogo pins used is rounded tip type that slips easily with minimal movement, i suggest they use one with rough tip like the one used on sagem jigs - strong yet small and grips the pcb well.

and hopefully they can add a power supply jack so that we can inject additional power to the cable (parallel to v+) that is very much needed for flashing/unlocking units like n82 and n95 8GB.

Thank you!

d_bug · 01-27-2009, 02:50

My modified and finished UFC:

and few logs from UFS+HWK

Phone: N82-1 RM-313

bsi set at 10k no added power

MCU SW : V 06wk41v44.1 17-10-07 RM-313 (c) Nokia
APE Core: A(
APE Var : A+
Prd.Code: 0551533
Bpr.Code: 0549319
Prod.Sn : CYA163059
HW Vers : 4002
APE HW :
APE Adsp:
EM VILMA: 15
EM BETTY: 22
RFIC Ver: 17141715
DSP Vers: mc_3131_06w41pb_07w40
WLAN Id : A24E7BFD1D
IMEI : 358984-01-******-1
SL Serv : SIMLOCK SERVER
SL Conf : 244-07-00000000000
SL Stat : 0000000000000000
SL Count: 00 00
Provider: Nokia Test;Finland

bsi set at 7.5k no power added 1st try

MCU SW : V 06wk41v44.1 17-10-07 RM-313 (c) Nokia
APE Core: F(
APE Var : G+
Prd.Code: @
Bpr.Code: A
Prod.Sn : B
HW Vers : C
APE HW : D/
APE Adsp: E.
PCI Vers: F
EM VILMA: G-
EM BETTY: @,
RFIC Ver: A
DSP Vers: B
LCD Type: C
IMEI : E---
SL Conf : 000-00-00000000000
SL Stat : 0000000000000000
SL Count: 00 00
Provider: Not Found

bsi set at 7.5k no power added 2nd try

MCU SW : V 06wk41v44.1 17-10-07 RM-313 (c) Nokia
APE Core: A(
APE Var : A+
Prd.Code: 0551533
Bpr.Code: 0549319
Prod.Sn : CYA163059
HW Vers : 4002
APE HW :
APE Adsp:
EM VILMA: 15
EM BETTY: 22
RFIC Ver: 17141715
DSP Vers: mc_3131_06w41pb_07w40
WLAN Id : A24E7BFD1D
IMEI : 358984-01-******-1
SL Serv : SIMLOCK SERVER
SL Conf : 244-07-00000000000
SL Stat : 0000000000000000
SL Count: 00 00
Provider: Nokia Test;Finland

bsi set to 5.1K phone turns to normal mode

bsi set to 7.5 with mod (added supply)

MCU SW : V 06wk41v44.1 17-10-07 RM-313 (c) Nokia
APE Core: 10.0.046
APE Var : 10.0.04613.01
Prd.Code: 0551533
Bpr.Code: 0549319
Prod.Sn : CYA163059
HW Vers : 4002
APE HW : 1
APE Adsp: 256
EM VILMA: 15
EM BETTY: 22
RFIC Ver: 17141715
DSP Vers: mc_3131_06w41pb_07w40
WLAN Id : A24E7BFD1D
IMEI : 358984-01-******-1
SL Serv : SIMLOCK SERVER
SL Conf : 244-07-00000000000
SL Stat : 0000000000000000
SL Count: 00 00
Provider: Nokia Test;Finland

bsi set to 7.5 with mod (added supply) and CHECK on UFS

1ST BOOT : C0,0B [Rm-313] [2.0.8.0]
OMAP ID : 24200705
OMAP MODE : 00
OMAP PBID : 3A69A9282D23039916325E5F88FB0C4311EA41E6
OMAP HASH : BA8710A7E1CD5A2909B9A875DB27AA24
RAPx ID : 000000010000022600010006400C192101021103
EM 1 ID : 00000295
EM 2 ID : 00000B22
RAPx PBID : 0C500004CD6B005888A29F63954B21D75CB98071
RAPx MODE : 00
RAPx HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
RAPx ROID : A8C1D6713E691FF8
CMT 1ST Boot OK
CMT 2ND Bt: RAPIDOv11_2nd.fg, Ver: 1.30.0
CMT FLID0 : 00010035-00006921, Amd 29NS128N
CMT FLCNT : 00000000000000000000000000000000000000
CMT MCID0 : FFFF0000-00000000
CMT 2ND Boot OK
CMT ALGO : RAPIDOv11_algo.fg, Ver: 1.35.0
CMT KSIG0 : F8311F20A18CAD3B70A4F896C74DD8711E189EED
CMT VPP : Internal
DUAL LINE : True
CMT ALG Boot OK
APE 2ND Bt: omap2420_m1_2nd.fg, Ver: 1.41.0
APE FLID0 : 00EC0040-00220000, Sam OneNAND-2G
APE RQALG : OMAP2420 UNISTORE-II-1.5.1 ALG
APE MCID0 : FFFF0000-00000000, IMC
APE 2ND Boot OK
APE ALG0 : teflon_sam_nand_xsr151_m1.fg, Ver: 1.57.0
APE VPP : Internal
APE KSIG1 : F8311F20A18CAD3B70A4F896C74DD8711E189EED
DUAL LINE : True
APE ALG Boot OK
Rebooting Mobile

bsi set to 7.5 with mod (added supply) and certificate backup

MCU SW : V 06wk41v44.1 17-10-07 RM-313 (c) Nokia
APE Core: 10.0.046
APE Var : 10.0.04613.01
Prd.Code: 0551533
Bpr.Code: 0549319
Prod.Sn : CYA163059
HW Vers : 4002
APE HW : 1
APE Adsp: 256
EM VILMA: 15
EM BETTY: 22
RFIC Ver: 17141715
DSP Vers: mc_3131_06w41pb_07w40
WLAN Id : A24E7BFD1D
IMEI : 358984-01-******-1
SL Serv : SIMLOCK SERVER
SL Conf : 244-07-00000000000
SL Stat : 0000000000000000
SL Count: 00 00
Provider: Nokia Test;Finland
Saved as Rm-313_35898401******1_1262009123912_Back_308.pm, 16539 byte(s)
1ST BOOT : C0,0B [Rm-313] [2.0.8.0]
OMAP ID : 24200705
OMAP MODE : 00
OMAP PBID : 3A69A9282D23039916325E5F88FB0C4311EA41E6
OMAP HASH : BA8710A7E1CD5A2909B9A875DB27AA24
RAPx ID : 000000010000022600010006400C192101021103
EM 1 ID : 00000295
EM 2 ID : 00000B22
RAPx PBID : 0C500004CD6B005888A29F63954B21D75CB98071
RAPx MODE : 00
RAPx HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
RAPx ROID : A8C1D6713E691FF8
CMT 1ST Boot OK
CMT 2ND Bt: RAPIDOv11_2nd.fg, Ver: 1.30.0
CMT FLID0 : 00010035-00006921, Amd 29NS128N
CMT FLCNT : 00000000000000000000000000000000000000
CMT MCID0 : FFFF0000-00000000
CMT 2ND Boot OK
CMT ALGO : RAPIDOv11_algo.fg, Ver: 1.35.0
CMT KSIG0 : F8311F20A18CAD3B70A4F896C74DD8711E189EED
CMT VPP : Internal
DUAL LINE : True
CMT ALG Boot OK
APE 2ND Bt: omap2420_m1_2nd.fg, Ver: 1.41.0
APE FLID0 : 00EC0040-00220000, Sam OneNAND-2G
APE RQALG : OMAP2420 UNISTORE-II-1.5.1 ALG
APE MCID0 : FFFF0000-00000000, IMC
APE 2ND Boot OK
APE ALG0 : teflon_sam_nand_xsr151_m1.fg, Ver: 1.57.0
APE VPP : Internal
APE KSIG1 : F8311F20A18CAD3B70A4F896C74DD8711E189EED
DUAL LINE : True
APE ALG Boot OK
CMT NPC Certificate: 30600 byte(s)
PROD: 0551533
HID0: 9039E09449585647B3352E00646F724200000000
PBID: 0C500004CD6B005888A29F63954B21D75CB98071
PSIG: F8311F20A18CAD3B70A4F896C74DD8711E189EED
HID1: 6432B92B17A51656DFBACC9ECCA15EB3FC9591FB
IMEI: 358984-01-******-1
BTID: A28387FD1D
WLAN: A24E7BFD1D
Saved as: Rm-313_35898401******1_1262009123937_NPCCmt.bin
Saved as: Rm-313_35898401******1_1262009123937.ask
CMT VARIANT Certificate: 16384 byte(s)
CMT VARIANT Certificate: Erased
Saved as: Rm-313_35898401******1_1262009123937_VARIANTCmt.bin
CMT R&D Certificate: 30600 byte(s)
CMT R&D Certificate: Erased
Saved as: Rm-313_35898401******1_1262009123937_RDCmt.bin
CMT CCC Certificate: 30600 byte(s)
Saved as: Rm-313_35898401******1_1262009123937_CCCCmt.bin
CMT HWC Certificate: 16384 byte(s)
HID0: 9039E09449585647000000000000000000000000
PBID: 0C500004CD6B005888A29F63954B21D75CB98071
PROD: 0551533
Saved as: Rm-313_35898401******1_1262009123937_HWCCmt.bin
APE NPC Certificate: 8192 byte(s)
PROD: 0551533
HID0: 9039E09465585647BD352E00646F724200000000
PBID: 3A69A9282D23039916325E5F88FB0C4311EA41E6
PSIG: F8311F20A18CAD3B70A4F896C74DD8711E189EED
HID1: 1FDA4B94077A18258EFA287DB21C26639EA083BE
IMEI: 358984-01-******-1
BTID: A28387FD1D
WLAN: A24E7BFD1D
Saved as: Rm-313_35898401******1_1262009123937_NPCApe.bin
APE VARIANT Certificate: 0 byte(s)
APE R&D Certificate: 1024 byte(s)
APE R&D Certificate: Erased
Saved as: Rm-313_35898401******1_1262009123937_RDApe.bin
APE CCC Certificate: 8192 byte(s)
Saved as: Rm-313_35898401******1_1262009123937_CCCApe.bin
APE HWC Certificate: 8192 byte(s)
HID0: 9039E09465585647000000000000000000000000
PBID: 3A69A9282D23039916325E5F88FB0C4311EA41E6
PROD: 0551533
Saved as: Rm-313_35898401******1_1262009123937_HWCApe.bin

Thank You!

**GPGIndustries** · 01-27-2009, 05:40

Thx for tips...But sounds quite strange what u are writing about the rj45 and the soldering...We use best materials this should happen...regarding the Soldering our QC check this. More over 23.000 units has been sold and u are the first to repodt this.

I will make sure about this when factory open after Holidays.xternal pawer we will implement it

Thx

modou · 01-27-2009, 05:58

i've to resolder mine after every 2 or 3 days used

Quote:

Originally Posted by GPGIndustries

Thx for tips...But sounds quite strange what u are writing about the rj45 and the soldering...We use best materials this should happen...regarding the Soldering our QC check this. More over 23.000 units has been sold and u are the first to repodt this.

I will make sure about this when factory open after Holidays.xternal pawer we will implement it

Thx

d_bug · 01-27-2009, 06:21

Quote:

Originally Posted by GPGIndustries

Thx for tips...But sounds quite strange what u are writing about the rj45 and the soldering...We use best materials this should happen...regarding the Soldering our QC check this. More over 23.000 units has been sold and u are the first to repodt this.

I will make sure about this when factory open after Holidays.xternal pawer we will implement it

Thx

RJ45 none-meshing is kinda rare (i have a VERY OLD 1st gen big UFS box) - but could explain why others are not getting any response or erroneous response. Personally, i love that rubber that protects the RJ45 lock, it helps a lot if you have tons of cables hooking with each other.

About the soldering? well, it's hand-made, and there's always a first time for errors

and maybe others are not checking their values, i do mine.

thanks for the notice. UFC by GPG rocks!!! no need to update cable every now and then (i have already TONS of them - eyesore for some. hehehe!)

and by the way, Gong Hei Fa Choi!!!

@others, trans:
Gong Hei Fa Choi = happy new year (cantonese)
More correctly:
Gong Hei = wishes for
Fa Choi = Prosperity (luck, wealth, health, new births etc)
Mandarin: "Gong Xi Fa Cai"

.:CARLO:. · 02-04-2009, 14:35

Quote:

Originally Posted by d_bug

RJ45 none-meshing is kinda rare (i have a VERY OLD 1st gen big UFS box) - but could explain why others are not getting any response or erroneous response. Personally, i love that rubber that protects the RJ45 lock, it helps a lot if you have tons of cables hooking with each other.

About the soldering? well, it's hand-made, and there's always a first time for errors

and maybe others are not checking their values, i do mine.

thanks for the notice. UFC by GPG rocks!!! no need to update cable every now and then (i have already TONS of them - eyesore for some. hehehe!)

and by the way, Gong Hei Fa Choi!!!

@others, trans:
Gong Hei Fa Choi = happy new year (cantonese)
More correctly:
Gong Hei = wishes for
Fa Choi = Prosperity (luck, wealth, health, new births etc)
Mandarin: "Gong Xi Fa Cai"

thanks for your idea..mine is working good now..thanks kabayan...

turkcellgsm · 02-05-2009, 17:15

thanks good work d bug

plase update ufc team new sulution sales charger models

iolejoi · 02-06-2009, 04:25

me to got some problem like n82 andn95 always cmt error if using jaf error ape with brand new phone tried to read certicate with ub its say cable fault tried select any value of resistor....................

iolejoi · 02-06-2009, 04:35

any new cable which no need to modify?why need to modify why n82 and n98 cant get local mode?whats the best cable which don need to modify?

electrolandgsm · 02-09-2009, 10:42

Quote:

Originally Posted by iolejoi

any new cable which no need to modify?why need to modify why n82 and n98 cant get local mode?whats the best cable which don need to modify?

use nexternal power supply for those phones

DaWizard · 02-10-2009, 05:21

Quote:

Originally Posted by d_bug

My modified and finished UFC:

and few logs from UFS+HWK

Phone: N82-1 RM-313

bsi set at 10k no added power

MCU SW : V 06wk41v44.1 17-10-07 RM-313 (c) Nokia
APE Core: A(
APE Var : A+
Prd.Code: 0551533
Bpr.Code: 0549319
Prod.Sn : CYA163059
HW Vers : 4002
APE HW :
APE Adsp:
EM VILMA: 15
EM BETTY: 22
RFIC Ver: 17141715
DSP Vers: mc_3131_06w41pb_07w40
WLAN Id : A24E7BFD1D
IMEI : 358984-01-******-1
SL Serv : SIMLOCK SERVER
SL Conf : 244-07-00000000000
SL Stat : 0000000000000000
SL Count: 00 00
Provider: Nokia Test;Finland

bsi set at 7.5k no power added 1st try

MCU SW : V 06wk41v44.1 17-10-07 RM-313 (c) Nokia
APE Core: F(
APE Var : G+
Prd.Code: @
Bpr.Code: A
Prod.Sn : B
HW Vers : C
APE HW : D/
APE Adsp: E.
PCI Vers: F
EM VILMA: G-
EM BETTY: @,
RFIC Ver: A
DSP Vers: B
LCD Type: C
IMEI : E---
SL Conf : 000-00-00000000000
SL Stat : 0000000000000000
SL Count: 00 00
Provider: Not Found

bsi set at 7.5k no power added 2nd try

MCU SW : V 06wk41v44.1 17-10-07 RM-313 (c) Nokia
APE Core: A(
APE Var : A+
Prd.Code: 0551533
Bpr.Code: 0549319
Prod.Sn : CYA163059
HW Vers : 4002
APE HW :
APE Adsp:
EM VILMA: 15
EM BETTY: 22
RFIC Ver: 17141715
DSP Vers: mc_3131_06w41pb_07w40
WLAN Id : A24E7BFD1D
IMEI : 358984-01-******-1
SL Serv : SIMLOCK SERVER
SL Conf : 244-07-00000000000
SL Stat : 0000000000000000
SL Count: 00 00
Provider: Nokia Test;Finland

bsi set to 5.1K phone turns to normal mode

bsi set to 7.5 with mod (added supply)

MCU SW : V 06wk41v44.1 17-10-07 RM-313 (c) Nokia
APE Core: 10.0.046
APE Var : 10.0.04613.01
Prd.Code: 0551533
Bpr.Code: 0549319
Prod.Sn : CYA163059
HW Vers : 4002
APE HW : 1
APE Adsp: 256
EM VILMA: 15
EM BETTY: 22
RFIC Ver: 17141715
DSP Vers: mc_3131_06w41pb_07w40
WLAN Id : A24E7BFD1D
IMEI : 358984-01-******-1
SL Serv : SIMLOCK SERVER
SL Conf : 244-07-00000000000
SL Stat : 0000000000000000
SL Count: 00 00
Provider: Nokia Test;Finland

bsi set to 7.5 with mod (added supply) and CHECK on UFS

1ST BOOT : C0,0B [Rm-313] [2.0.8.0]
OMAP ID : 24200705
OMAP MODE : 00
OMAP PBID : 3A69A9282D23039916325E5F88FB0C4311EA41E6
OMAP HASH : BA8710A7E1CD5A2909B9A875DB27AA24
RAPx ID : 000000010000022600010006400C192101021103
EM 1 ID : 00000295
EM 2 ID : 00000B22
RAPx PBID : 0C500004CD6B005888A29F63954B21D75CB98071
RAPx MODE : 00
RAPx HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
RAPx ROID : A8C1D6713E691FF8
CMT 1ST Boot OK
CMT 2ND Bt: RAPIDOv11_2nd.fg, Ver: 1.30.0
CMT FLID0 : 00010035-00006921, Amd 29NS128N
CMT FLCNT : 00000000000000000000000000000000000000
CMT MCID0 : FFFF0000-00000000
CMT 2ND Boot OK
CMT ALGO : RAPIDOv11_algo.fg, Ver: 1.35.0
CMT KSIG0 : F8311F20A18CAD3B70A4F896C74DD8711E189EED
CMT VPP : Internal
DUAL LINE : True
CMT ALG Boot OK
APE 2ND Bt: omap2420_m1_2nd.fg, Ver: 1.41.0
APE FLID0 : 00EC0040-00220000, Sam OneNAND-2G
APE RQALG : OMAP2420 UNISTORE-II-1.5.1 ALG
APE MCID0 : FFFF0000-00000000, IMC
APE 2ND Boot OK
APE ALG0 : teflon_sam_nand_xsr151_m1.fg, Ver: 1.57.0
APE VPP : Internal
APE KSIG1 : F8311F20A18CAD3B70A4F896C74DD8711E189EED
DUAL LINE : True
APE ALG Boot OK
Rebooting Mobile

bsi set to 7.5 with mod (added supply) and certificate backup

MCU SW : V 06wk41v44.1 17-10-07 RM-313 (c) Nokia
APE Core: 10.0.046
APE Var : 10.0.04613.01
Prd.Code: 0551533
Bpr.Code: 0549319
Prod.Sn : CYA163059
HW Vers : 4002
APE HW : 1
APE Adsp: 256
EM VILMA: 15
EM BETTY: 22
RFIC Ver: 17141715
DSP Vers: mc_3131_06w41pb_07w40
WLAN Id : A24E7BFD1D
IMEI : 358984-01-******-1
SL Serv : SIMLOCK SERVER
SL Conf : 244-07-00000000000
SL Stat : 0000000000000000
SL Count: 00 00
Provider: Nokia Test;Finland
Saved as Rm-313_35898401******1_1262009123912_Back_308.pm, 16539 byte(s)
1ST BOOT : C0,0B [Rm-313] [2.0.8.0]
OMAP ID : 24200705
OMAP MODE : 00
OMAP PBID : 3A69A9282D23039916325E5F88FB0C4311EA41E6
OMAP HASH : BA8710A7E1CD5A2909B9A875DB27AA24
RAPx ID : 000000010000022600010006400C192101021103
EM 1 ID : 00000295
EM 2 ID : 00000B22
RAPx PBID : 0C500004CD6B005888A29F63954B21D75CB98071
RAPx MODE : 00
RAPx HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
RAPx ROID : A8C1D6713E691FF8
CMT 1ST Boot OK
CMT 2ND Bt: RAPIDOv11_2nd.fg, Ver: 1.30.0
CMT FLID0 : 00010035-00006921, Amd 29NS128N
CMT FLCNT : 00000000000000000000000000000000000000
CMT MCID0 : FFFF0000-00000000
CMT 2ND Boot OK
CMT ALGO : RAPIDOv11_algo.fg, Ver: 1.35.0
CMT KSIG0 : F8311F20A18CAD3B70A4F896C74DD8711E189EED
CMT VPP : Internal
DUAL LINE : True
CMT ALG Boot OK
APE 2ND Bt: omap2420_m1_2nd.fg, Ver: 1.41.0
APE FLID0 : 00EC0040-00220000, Sam OneNAND-2G
APE RQALG : OMAP2420 UNISTORE-II-1.5.1 ALG
APE MCID0 : FFFF0000-00000000, IMC
APE 2ND Boot OK
APE ALG0 : teflon_sam_nand_xsr151_m1.fg, Ver: 1.57.0
APE VPP : Internal
APE KSIG1 : F8311F20A18CAD3B70A4F896C74DD8711E189EED
DUAL LINE : True
APE ALG Boot OK
CMT NPC Certificate: 30600 byte(s)
PROD: 0551533
HID0: 9039E09449585647B3352E00646F724200000000
PBID: 0C500004CD6B005888A29F63954B21D75CB98071
PSIG: F8311F20A18CAD3B70A4F896C74DD8711E189EED
HID1: 6432B92B17A51656DFBACC9ECCA15EB3FC9591FB
IMEI: 358984-01-******-1
BTID: A28387FD1D
WLAN: A24E7BFD1D
Saved as: Rm-313_35898401******1_1262009123937_NPCCmt.bin
Saved as: Rm-313_35898401******1_1262009123937.ask
CMT VARIANT Certificate: 16384 byte(s)
CMT VARIANT Certificate: Erased
Saved as: Rm-313_35898401******1_1262009123937_VARIANTCmt.bin
CMT R&D Certificate: 30600 byte(s)
CMT R&D Certificate: Erased
Saved as: Rm-313_35898401******1_1262009123937_RDCmt.bin
CMT CCC Certificate: 30600 byte(s)
Saved as: Rm-313_35898401******1_1262009123937_CCCCmt.bin
CMT HWC Certificate: 16384 byte(s)
HID0: 9039E09449585647000000000000000000000000
PBID: 0C500004CD6B005888A29F63954B21D75CB98071
PROD: 0551533
Saved as: Rm-313_35898401******1_1262009123937_HWCCmt.bin
APE NPC Certificate: 8192 byte(s)
PROD: 0551533
HID0: 9039E09465585647BD352E00646F724200000000
PBID: 3A69A9282D23039916325E5F88FB0C4311EA41E6
PSIG: F8311F20A18CAD3B70A4F896C74DD8711E189EED
HID1: 1FDA4B94077A18258EFA287DB21C26639EA083BE
IMEI: 358984-01-******-1
BTID: A28387FD1D
WLAN: A24E7BFD1D
Saved as: Rm-313_35898401******1_1262009123937_NPCApe.bin
APE VARIANT Certificate: 0 byte(s)
APE R&D Certificate: 1024 byte(s)
APE R&D Certificate: Erased
Saved as: Rm-313_35898401******1_1262009123937_RDApe.bin
APE CCC Certificate: 8192 byte(s)
Saved as: Rm-313_35898401******1_1262009123937_CCCApe.bin
APE HWC Certificate: 8192 byte(s)
HID0: 9039E09465585647000000000000000000000000
PBID: 3A69A9282D23039916325E5F88FB0C4311EA41E6
PROD: 0551533
Saved as: Rm-313_35898401******1_1262009123937_HWCApe.bin

Thank You!

Bro i have some small question, after the modification, thus this model still work with other nokia models and how about the value of the resistor to the cover of the UFC do we need to change it also or just leave it as is?

Tnx in advance

bojs · 02-10-2009, 05:35

To d_bug,

thanks for this useful post. i am also a new user of UFC cable. can you please
post here the wirings you make for the external power supply connector on your UFC?

br,
bojs

d_bug · 02-11-2009, 06:05

Quote:

Originally Posted by DaWizard

Bro i have some small question, after the modification, thus this model still work with other nokia models and how about the value of the resistor to the cover of the UFC do we need to change it also or just leave it as is?

Tnx in advance

hi. yeah cable works normal. you only need those extra power when unlocking/flashing n958g, n82 and the likes (those that can't stay on local mode long enough)

about the label, in my particular set i have to interchange the resistors to get the right reading as indicated on the cover -- so, its either you interchange the connector or you rename the markings. btw, i think 8.2k is better that 7.5k

as for where to tap the supply:

http://forum.gsmhosting.com/vbb/atta...6&d=1233817553

electrolandgsm · 02-11-2009, 09:27

red wire..is +
so there you must put the extra voltage.
make extra voltage on red and black..+ and -
and will be ok
sometimes problems can be from low power from usb port..measure the outline power of the usb com from pc..should be around 5V
if lower..can get problems with a lot of phones

d_bug · 02-15-2009, 12:55

hi once again,

it seems my post about wrong resistor placement was long been discovered and i can only confirm it.

http://forum.gsmhosting.com/vbb/show...25&postcount=7 posted dec 04 2008

i hope this can also provide color/marker for inline type pins esp on ground pin for easier identification.

and pin slides realy quite easily, use a rough tips please!

01-27-2009, 02:49	#1 (permalink)
d_bug Freak Poster Join Date: Jan 2001 Location: 13 00 N, 122 00 E (PH) Posts: 364 Member: 3156 Status: Offline Thanks Meter: 63	UFC suggested improvements Just got my brandnew cable today and already have some little trouble with this nice cable set. First, i cannot get any connection with any phone with any connector - finally after more minutes of tweaking, found out that RJ45 connector to my UFS is loose and not meshing well, i tried holding it while connecting to the phone and voila!!! i got a response, but i can't do this everytime i have something to work with so i decided to replace the connector from one of my "old" unused RJ45 connector and all works well. Second, factory workers seems to be sleeping while doing this and resistors got swapped and different from the one indicated on the selector switch. I have to do this modification to get the right reading from RJ45 pin3 to green grabber clip: And third, pogo pins used is rounded tip type that slips easily with minimal movement, i suggest they use one with rough tip like the one used on sagem jigs - strong yet small and grips the pcb well. and hopefully they can add a power supply jack so that we can inject additional power to the cable (parallel to v+) that is very much needed for flashing/unlocking units like n82 and n95 8GB. Thank you!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Suggestions for improvement of Universalbox software	James_S	Universalbox	0	11-21-2007 22:32
New suggestions for BB5box SW improvements	James_S	BB5BOX	18	11-18-2007 10:53

01-27-2009, 02:50	#2 (permalink)
d_bug Freak Poster Join Date: Jan 2001 Location: 13 00 N, 122 00 E (PH) Posts: 364 Member: 3156 Status: Offline Thanks Meter: 63	My modified and finished UFC: and few logs from UFS+HWK Phone: N82-1 RM-313 bsi set at 10k no added power MCU SW : V 06wk41v44.1 17-10-07 RM-313 (c) Nokia APE Core: A( APE Var : A+ Prd.Code: 0551533 Bpr.Code: 0549319 Prod.Sn : CYA163059 HW Vers : 4002 APE HW : APE Adsp: EM VILMA: 15 EM BETTY: 22 RFIC Ver: 17141715 DSP Vers: mc_3131_06w41pb_07w40 WLAN Id : A24E7BFD1D IMEI : 358984-01-****-1 SL Serv : SIMLOCK SERVER SL Conf : 244-07-00000000000 SL Stat : 0000000000000000 SL Count: 00 00 Provider: Nokia Test;Finland bsi set at 7.5k no power added 1st try MCU SW : V 06wk41v44.1 17-10-07 RM-313 (c) Nokia APE Core: F( APE Var : G+ Prd.Code: @ Bpr.Code: A Prod.Sn : B HW Vers : C APE HW : D/ APE Adsp: E. PCI Vers: F EM VILMA: G- EM BETTY: @, RFIC Ver: A DSP Vers: B LCD Type: C IMEI : E--- SL Conf : 000-00-00000000000 SL Stat : 0000000000000000 SL Count: 00 00 Provider: Not Found bsi set at 7.5k no power added 2nd try MCU SW : V 06wk41v44.1 17-10-07 RM-313 (c) Nokia APE Core: A( APE Var : A+ Prd.Code: 0551533 Bpr.Code: 0549319 Prod.Sn : CYA163059 HW Vers : 4002 APE HW : APE Adsp: EM VILMA: 15 EM BETTY: 22 RFIC Ver: 17141715 DSP Vers: mc_3131_06w41pb_07w40 WLAN Id : A24E7BFD1D IMEI : 358984-01-**-1 SL Serv : SIMLOCK SERVER SL Conf : 244-07-00000000000 SL Stat : 0000000000000000 SL Count: 00 00 Provider: Nokia Test;Finland bsi set to 5.1K phone turns to normal mode bsi set to 7.5 with mod (added supply) MCU SW : V 06wk41v44.1 17-10-07 RM-313 (c) Nokia APE Core: 10.0.046 APE Var : 10.0.04613.01 Prd.Code: 0551533 Bpr.Code: 0549319 Prod.Sn : CYA163059 HW Vers : 4002 APE HW : 1 APE Adsp: 256 EM VILMA: 15 EM BETTY: 22 RFIC Ver: 17141715 DSP Vers: mc_3131_06w41pb_07w40 WLAN Id : A24E7BFD1D IMEI : 358984-01-**-1 SL Serv : SIMLOCK SERVER SL Conf : 244-07-00000000000 SL Stat : 0000000000000000 SL Count: 00 00 Provider: Nokia Test;Finland bsi set to 7.5 with mod (added supply) and CHECK on UFS 1ST BOOT : C0,0B [Rm-313] [2.0.8.0] OMAP ID : 24200705 OMAP MODE : 00 OMAP PBID : 3A69A9282D23039916325E5F88FB0C4311EA41E6 OMAP HASH : BA8710A7E1CD5A2909B9A875DB27AA24 RAPx ID : 000000010000022600010006400C192101021103 EM 1 ID : 00000295 EM 2 ID : 00000B22 RAPx PBID : 0C500004CD6B005888A29F63954B21D75CB98071 RAPx MODE : 00 RAPx HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE RAPx ROID : A8C1D6713E691FF8 CMT 1ST Boot OK CMT 2ND Bt: RAPIDOv11_2nd.fg, Ver: 1.30.0 CMT FLID0 : 00010035-00006921, Amd 29NS128N CMT FLCNT : 00000000000000000000000000000000000000 CMT MCID0 : FFFF0000-00000000 CMT 2ND Boot OK CMT ALGO : RAPIDOv11_algo.fg, Ver: 1.35.0 CMT KSIG0 : F8311F20A18CAD3B70A4F896C74DD8711E189EED CMT VPP : Internal DUAL LINE : True CMT ALG Boot OK APE 2ND Bt: omap2420_m1_2nd.fg, Ver: 1.41.0 APE FLID0 : 00EC0040-00220000, Sam OneNAND-2G APE RQALG : OMAP2420 UNISTORE-II-1.5.1 ALG APE MCID0 : FFFF0000-00000000, IMC APE 2ND Boot OK APE ALG0 : teflon_sam_nand_xsr151_m1.fg, Ver: 1.57.0 APE VPP : Internal APE KSIG1 : F8311F20A18CAD3B70A4F896C74DD8711E189EED DUAL LINE : True APE ALG Boot OK Rebooting Mobile bsi set to 7.5 with mod (added supply) and certificate backup MCU SW : V 06wk41v44.1 17-10-07 RM-313 (c) Nokia APE Core: 10.0.046 APE Var : 10.0.04613.01 Prd.Code: 0551533 Bpr.Code: 0549319 Prod.Sn : CYA163059 HW Vers : 4002 APE HW : 1 APE Adsp: 256 EM VILMA: 15 EM BETTY: 22 RFIC Ver: 17141715 DSP Vers: mc_3131_06w41pb_07w40 WLAN Id : A24E7BFD1D IMEI : 358984-01-**-1 SL Serv : SIMLOCK SERVER SL Conf : 244-07-00000000000 SL Stat : 0000000000000000 SL Count: 00 00 Provider: Nokia Test;Finland Saved as Rm-313_35898401**1_1262009123912_Back_308.pm, 16539 byte(s) 1ST BOOT : C0,0B [Rm-313] [2.0.8.0] OMAP ID : 24200705 OMAP MODE : 00 OMAP PBID : 3A69A9282D23039916325E5F88FB0C4311EA41E6 OMAP HASH : BA8710A7E1CD5A2909B9A875DB27AA24 RAPx ID : 000000010000022600010006400C192101021103 EM 1 ID : 00000295 EM 2 ID : 00000B22 RAPx PBID : 0C500004CD6B005888A29F63954B21D75CB98071 RAPx MODE : 00 RAPx HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE RAPx ROID : A8C1D6713E691FF8 CMT 1ST Boot OK CMT 2ND Bt: RAPIDOv11_2nd.fg, Ver: 1.30.0 CMT FLID0 : 00010035-00006921, Amd 29NS128N CMT FLCNT : 00000000000000000000000000000000000000 CMT MCID0 : FFFF0000-00000000 CMT 2ND Boot OK CMT ALGO : RAPIDOv11_algo.fg, Ver: 1.35.0 CMT KSIG0 : F8311F20A18CAD3B70A4F896C74DD8711E189EED CMT VPP : Internal DUAL LINE : True CMT ALG Boot OK APE 2ND Bt: omap2420_m1_2nd.fg, Ver: 1.41.0 APE FLID0 : 00EC0040-00220000, Sam OneNAND-2G APE RQALG : OMAP2420 UNISTORE-II-1.5.1 ALG APE MCID0 : FFFF0000-00000000, IMC APE 2ND Boot OK APE ALG0 : teflon_sam_nand_xsr151_m1.fg, Ver: 1.57.0 APE VPP : Internal APE KSIG1 : F8311F20A18CAD3B70A4F896C74DD8711E189EED DUAL LINE : True APE ALG Boot OK CMT NPC Certificate: 30600 byte(s) PROD: 0551533 HID0: 9039E09449585647B3352E00646F724200000000 PBID: 0C500004CD6B005888A29F63954B21D75CB98071 PSIG: F8311F20A18CAD3B70A4F896C74DD8711E189EED HID1: 6432B92B17A51656DFBACC9ECCA15EB3FC9591FB IMEI: 358984-01-**-1 BTID: A28387FD1D WLAN: A24E7BFD1D Saved as: Rm-313_35898401**1_1262009123937_NPCCmt.bin Saved as: Rm-313_35898401**1_1262009123937.ask CMT VARIANT Certificate: 16384 byte(s) CMT VARIANT Certificate: Erased Saved as: Rm-313_35898401**1_1262009123937_VARIANTCmt.bin CMT R&D Certificate: 30600 byte(s) CMT R&D Certificate: Erased Saved as: Rm-313_35898401**1_1262009123937_RDCmt.bin CMT CCC Certificate: 30600 byte(s) Saved as: Rm-313_35898401**1_1262009123937_CCCCmt.bin CMT HWC Certificate: 16384 byte(s) HID0: 9039E09449585647000000000000000000000000 PBID: 0C500004CD6B005888A29F63954B21D75CB98071 PROD: 0551533 Saved as: Rm-313_35898401**1_1262009123937_HWCCmt.bin APE NPC Certificate: 8192 byte(s) PROD: 0551533 HID0: 9039E09465585647BD352E00646F724200000000 PBID: 3A69A9282D23039916325E5F88FB0C4311EA41E6 PSIG: F8311F20A18CAD3B70A4F896C74DD8711E189EED HID1: 1FDA4B94077A18258EFA287DB21C26639EA083BE IMEI: 358984-01-**-1 BTID: A28387FD1D WLAN: A24E7BFD1D Saved as: Rm-313_35898401**1_1262009123937_NPCApe.bin APE VARIANT Certificate: 0 byte(s) APE R&D Certificate: 1024 byte(s) APE R&D Certificate: Erased Saved as: Rm-313_35898401**1_1262009123937_RDApe.bin APE CCC Certificate: 8192 byte(s) Saved as: Rm-313_35898401**1_1262009123937_CCCApe.bin APE HWC Certificate: 8192 byte(s) HID0: 9039E09465585647000000000000000000000000 PBID: 3A69A9282D23039916325E5F88FB0C4311EA41E6 PROD: 0551533 Saved as: Rm-313_35898401****1_1262009123937_HWCApe.bin Thank You!

01-27-2009, 05:40	#3 (permalink)
GPGIndustries Product Manager Join Date: Jul 2003 Location: France,China,Dubai,Indonesia Age: 47 Posts: 3,700 Member: 34016 Status: Offline Sonork: 100.67372 Thanks Meter: 24,594	Thx for tips...But sounds quite strange what u are writing about the rj45 and the soldering...We use best materials this should happen...regarding the Soldering our QC check this. More over 23.000 units has been sold and u are the first to repodt this. I will make sure about this when factory open after Holidays.xternal pawer we will implement it Thx

02-05-2009, 17:15	#7 (permalink)
turkcellgsm No Life Poster Join Date: Nov 2006 Location: Türkiye Posts: 1,341 Member: 395431 Status: Offline Thanks Meter: 458	thanks good work d bug plase update ufc team new sulution sales charger models

02-06-2009, 04:25	#8 (permalink)
iolejoi No Life Poster Join Date: Sep 2004 Age: 49 Posts: 539 Member: 81501 Status: Offline Thanks Meter: 41	me to got some problem like n82 andn95 always cmt error if using jaf error ape with brand new phone tried to read certicate with ub its say cable fault tried select any value of resistor....................

02-06-2009, 04:35	#9 (permalink)
iolejoi No Life Poster Join Date: Sep 2004 Age: 49 Posts: 539 Member: 81501 Status: Offline Thanks Meter: 41	any new cable which no need to modify?why need to modify why n82 and n98 cant get local mode?whats the best cable which don need to modify?

02-10-2009, 05:35	#12 (permalink)
bojs Freak Poster Join Date: Jul 2005 Location: South East Asia Posts: 470 Member: 162947 Status: Offline Thanks Meter: 1,145	To d_bug, thanks for this useful post. i am also a new user of UFC cable. can you please post here the wirings you make for the external power supply connector on your UFC? br, bojs

02-11-2009, 09:27	#14 (permalink)
electrolandgsm No Life Poster Join Date: Aug 2005 Location: romania-bm Age: 40 Posts: 1,422 Member: 174315 Status: Offline Thanks Meter: 123	red wire..is + so there you must put the extra voltage. make extra voltage on red and black..+ and - and will be ok sometimes problems can be from low power from usb port..measure the outline power of the usb com from pc..should be around 5V if lower..can get problems with a lot of phones

02-15-2009, 12:55	#15 (permalink)
d_bug Freak Poster Join Date: Jan 2001 Location: 13 00 N, 122 00 E (PH) Posts: 364 Member: 3156 Status: Offline Thanks Meter: 63	hi once again, it seems my post about wrong resistor placement was long been discovered and i can only confirm it. http://forum.gsmhosting.com/vbb/show...25&postcount=7 posted dec 04 2008 i hope this can also provide color/marker for inline type pins esp on ground pin for easier identification. and pin slides realy quite easily, use a rough tips please!