UFCV2 Modif - GSM-Forum

bestin · 10-02-2009, 05:58

It would be nice to know what FBUS cables eg., MT, JAF, UB?? it supports and if also supports UFC cables 8 and 10pin.

I think ppls need this information before they, buy...

Can be used in other Boxes or only works with cyclone Box???

moulnisky · 10-03-2009, 06:39

Quote:

Originally Posted by bestin

It would be nice to know what FBUS cables eg., MT, JAF, UB?? it supports and if also supports UFC cables 8 and 10pin.

I think ppls need this information before they, buy...

Can be used in other Boxes or only works with cyclone Box???

Hi Bestin

It is for Jaf/HWK pinouts as the original TX2. It supports the UFC and the UFC V2 cable..
if you do this little modify on the UFC V2 you will be able, leaving the adapter in the BB5 position, to use the 10 Pin MT jigs with the VPP working 100%

Cheers my friend

Alex

dirty devil · 10-08-2009, 21:17

Quote:

Originally Posted by moulnisky

Hi Bestin

It is for Jaf/HWK pinouts as the original TX2. It supports the UFC and the UFC V2 cable..
if you do this little modify on the UFC V2 you will be able, leaving the adapter in the BB5 position, to use the 10 Pin MT jigs with the VPP working 100%

Cheers my friend

Alex

working 100% thank you

tgcommss · 10-09-2009, 05:26

Hi Moulnisky

You mean cut the no.4 (grey colour) cable , then connect red short cable to no.4 , rite ?

moulnisky · 10-17-2009, 00:04

Just to extend the cutted one (red) and connect together with the gray

BR

Alex

tgcommss · 10-17-2009, 02:45

moulnisky @

Thanks for reply , i try and post result .

Allunlockingsource · 10-17-2009, 05:14

Quote:

Originally Posted by moulnisky

Hi Bestin

It is for Jaf/HWK pinouts as the original TX2. It supports the UFC and the UFC V2 cable..
if you do this little modify on the UFC V2 you will be able, leaving the adapter in the BB5 position, to use the 10 Pin MT jigs with the VPP working 100%

Cheers my friend

Alex

thx brother good work .......................... yes its 100% workig...................

tgcommss · 10-18-2009, 07:07

Not work , after modify i tried nokia 5200 on jaf using ufcv2 MT(10pins) & (8-10pins) cable . Phone cant go to local / test mode too !! I thought ufcv2 more advance than ufc combo , seem like the same ...........

Fernyx · 10-28-2009, 13:36

I need make the modification for use with a Cyclone or a JAF??

Thanks

akhil_bbsr · 10-28-2009, 14:04

what modification UFC V2 we can do to work in ufs hwk/cyclone bb5

Arion123 · 11-03-2009, 21:38

I try to find RJ48 Pinout of UFCv2:
Does it good or not?

1. PIN not used
2. PIN MT Box VPP
3. PIN not used
4. PIN RX2
5. PIN MBUS
6. PIN TX
7. PIN not used
8. PIN RX
9. PIN GND
10 PIN not used

Could anybody confirm it?

BR: Arion

GENEW · 11-07-2009, 16:09

it seems that the cable company use us to find ways to solve problems in making phone into local mode or test mode. then after wards they will the solutions to us nice work. i hope they could make it more perfect so that we are not wasting our money.

10-02-2009, 05:58	#1 (permalink)
bestin Banned Join Date: Jul 2009 Posts: 542 Member: 1071056 Status: Offline Thanks Meter: 897	UFCV2 Modif It would be nice to know what FBUS cables eg., MT, JAF, UB?? it supports and if also supports UFC cables 8 and 10pin. I think ppls need this information before they, buy... Can be used in other Boxes or only works with cyclone Box???

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ABOUT ufcv2 CABLE!!!!	tommyvo	Cyclonebox	10	10-06-2009 04:32

10-17-2009, 00:04	#5 (permalink)
moulnisky No Life Poster Join Date: Jan 2009 Location: England Age: 59 Posts: 17,681 Member: 947561 Status: Offline Thanks Meter: 14,053	Just to extend the cutted one (red) and connect together with the gray BR Alex

10-17-2009, 02:45	#6 (permalink)
tgcommss No Life Poster Join Date: Feb 2005 Location: tampin malaysia Age: 61 Posts: 642 Member: 117956 Status: Offline Thanks Meter: 115	moulnisky @ Thanks for reply , i try and post result .

10-18-2009, 07:07	#8 (permalink)
tgcommss No Life Poster Join Date: Feb 2005 Location: tampin malaysia Age: 61 Posts: 642 Member: 117956 Status: Offline Thanks Meter: 115	Not work , after modify i tried nokia 5200 on jaf using ufcv2 MT(10pins) & (8-10pins) cable . Phone cant go to local / test mode too !! I thought ufcv2 more advance than ufc combo , seem like the same ...........

10-28-2009, 13:36	#9 (permalink)
Fernyx Freak Poster Join Date: Jan 2006 Posts: 397 Member: 223166 Status: Offline Thanks Meter: 14	I need make the modification for use with a Cyclone or a JAF?? Thanks

10-28-2009, 14:04	#10 (permalink)
akhil_bbsr No Life Poster Join Date: May 2006 Location: MOBILE SOFTZONE BHUBANESWAR IN Posts: 3,509 Member: 271478 Status: Offline Sonork: 1590868 Thanks Meter: 1,070	what modification UFC V2 we can do to work in ufs hwk/cyclone bb5

11-03-2009, 21:38	#11 (permalink)
Arion123 Freak Poster Join Date: Mar 2002 Location: Hungary Age: 53 Posts: 267 Member: 9862 Status: Offline Thanks Meter: 23	I try to find RJ48 Pinout of UFCv2: Does it good or not? 1. PIN not used 2. PIN MT Box VPP 3. PIN not used 4. PIN RX2 5. PIN MBUS 6. PIN TX 7. PIN not used 8. PIN RX 9. PIN GND 10 PIN not used Could anybody confirm it? BR: Arion

11-07-2009, 16:09	#12 (permalink)
GENEW Major Poster Join Date: Feb 2005 Age: 44 Posts: 45 Member: 112835 Status: Offline Thanks Meter: 1	it seems that the cable company use us to find ways to solve problems in making phone into local mode or test mode. then after wards they will the solutions to us nice work. i hope they could make it more perfect so that we are not wasting our money.