UFS Mt Special Edition and N95 Problem - GSM-Forum

Amir-SkillZ · 12-16-2008, 06:47

Ive just Bought the MT Special Edtion of UFS...
Testing on my N95...for local mode it not possibe tried on Resistor 7.1 and 10k
But Phone just gets Powered on but not in Local or Test Mode...
Here is Log Below
-------------------------------

Pins:
Mbus 0, Box Tx 1, Box Rx 0, Bsi 0
Boot...
Using Tx2 Data line.
RAPIDOv11_2nd.fg
RAPIDOv11_algo.fg
omap2420_m1_2nd.fg
teflon_sam_nand_xsr151_m1.fg
BOOT OK...
Phone Type: BB5
------------------- SYSTEM ID Response: 11 blocks -------------
SYSTEM_ASIC_ID( APE ):
24200705
ASIC_MODE_ID( APE ):
00
PUBLIC_ID( APE ):
C575DCD09574C7C87878C575B64A28B2C0DC9161
ROOT_KEY_HASH( APE ):
BA8710A7E1CD5A2909B9A875DB27AA2400000000
SYSTEM_ASIC_ID( RAP ):
000000010000022600010006400C192101011103
EM_ASIC_ID( RAP ):
00000295
EM_ASIC_ID( RAP ):
00000B22
PUBLIC_ID( RAP ):
163002136D5B0058A5FBEC5C98229145868A2A83
ASIC_MODE_ID( RAP ):
00
ROOT_KEY_HASH( RAP ):
CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM_ID( RAP ):
F2C6EBADC86E6189
--------------- Device ID Response: 3 blocks -------------
Storage Device:
Owner Asic: RAP
Type: NOR Flash
Index: 0
Flash: Amd, 0001 0035 0000 6921
Storage Device Contents:
Owner Asic: RAP
000000000000000000000000000000000000
============= Set FBus mode for info =============
Pins:
Mbus 0, Box Tx 1, Box Rx 1, Bsi 0
============= Set Flash mode for info =============
Pins:
Mbus 0, Box Tx 1, Box Rx 1, Bsi 0
Boot...
Using Tx2 Data line.
RAPIDOv11_2nd.fg
RAPIDOv11_algo.fg
omap2420_m1_2nd.fg
teflon_sam_nand_xsr151_m1.fg
BOOT OK...
Phone Type: BB5
------------------- SYSTEM ID Response: 11 blocks -------------
SYSTEM_ASIC_ID( APE ):
24200705
ASIC_MODE_ID( APE ):
00
PUBLIC_ID( APE ):
C575DCD09574C7C87878C575B64A28B2C0DC9161
ROOT_KEY_HASH( APE ):
BA8710A7E1CD5A2909B9A875DB27AA2400000000
SYSTEM_ASIC_ID( RAP ):
000000010000022600010006400C192101011103
EM_ASIC_ID( RAP ):
00000295
EM_ASIC_ID( RAP ):
00000B22
PUBLIC_ID( RAP ):
163002136D5B0058A5FBEC5C98229145868A2A83
ASIC_MODE_ID( RAP ):
00
ROOT_KEY_HASH( RAP ):
CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM_ID( RAP ):
F2C6EBADC86E6189
--------------- Device ID Response: 3 blocks -------------
Storage Device:
Owner Asic: RAP
Type: NOR Flash
Index: 0
Flash: Amd, 0001 0035 0000 6921
Storage Device Contents:
Owner Asic: RAP
000000000000000000000000000000000000
============= Set FBus mode for info =============
Pins:
Mbus 0, Box Tx 1, Box Rx 1, Bsi 0

---------------------------------------------------------------

I Also tested with TX2 Line Unchecked that Wont help Either...
Any Help how to solve this issue

p,s i not tested on any other Phone yet

Kindly Edit my Thread Title as i wrote UFS intead of UFC

kevin168 · 12-16-2008, 09:04

hello...
read this.
also same problem, i think u should make some modified on UFC cable.

br,
kevin168

Amir-SkillZ · 12-18-2008, 06:42

No Modification Needed Bro..
Simply Give External Power to Vpp (4.0 volts)...
And press power button on phone a Little Voila see ur Phone in Local Mode

kevin168 · 12-19-2008, 10:03

Quote:

Originally Posted by Amir-SkillZ

No Modification Needed Bro..
Simply Give External Power to Vpp (4.0 volts)...
And press power button on phone a Little Voila see ur Phone in Local Mode

please try on N82 phone..

br,
kevin168

bestncheap · 12-19-2008, 17:32

Quote:

Originally Posted by kevin168

please try on N82 phone..

br,
kevin168

n82 also can do my bro..

i try N82 using JAF with UFC can local mode. and also can info..
for me i add xternal power 4,3volt..

BR

BnC

12-16-2008, 06:47	#1 (permalink)
Amir-SkillZ No Life Poster Join Date: Nov 2004 Location: Capetown Posts: 6,709 Member: 91045 Status: Offline Thanks Meter: 8,696	UFS Mt Special Edition and N95 Problem Ive just Bought the MT Special Edtion of UFS... Testing on my N95...for local mode it not possibe tried on Resistor 7.1 and 10k But Phone just gets Powered on but not in Local or Test Mode... Here is Log Below ------------------------------- Pins: Mbus 0, Box Tx 1, Box Rx 0, Bsi 0 Boot... Using Tx2 Data line. RAPIDOv11_2nd.fg RAPIDOv11_algo.fg omap2420_m1_2nd.fg teflon_sam_nand_xsr151_m1.fg BOOT OK... Phone Type: BB5 ------------------- SYSTEM ID Response: 11 blocks ------------- SYSTEM_ASIC_ID( APE ): 24200705 ASIC_MODE_ID( APE ): 00 PUBLIC_ID( APE ): C575DCD09574C7C87878C575B64A28B2C0DC9161 ROOT_KEY_HASH( APE ): BA8710A7E1CD5A2909B9A875DB27AA2400000000 SYSTEM_ASIC_ID( RAP ): 000000010000022600010006400C192101011103 EM_ASIC_ID( RAP ): 00000295 EM_ASIC_ID( RAP ): 00000B22 PUBLIC_ID( RAP ): 163002136D5B0058A5FBEC5C98229145868A2A83 ASIC_MODE_ID( RAP ): 00 ROOT_KEY_HASH( RAP ): CAEEBB65D3C48E6DC73B49DC5063A2EE ROM_ID( RAP ): F2C6EBADC86E6189 --------------- Device ID Response: 3 blocks ------------- Storage Device: Owner Asic: RAP Type: NOR Flash Index: 0 Flash: Amd, 0001 0035 0000 6921 Storage Device Contents: Owner Asic: RAP 000000000000000000000000000000000000 ============= Set FBus mode for info ============= Pins: Mbus 0, Box Tx 1, Box Rx 1, Bsi 0 ============= Set Flash mode for info ============= Pins: Mbus 0, Box Tx 1, Box Rx 1, Bsi 0 Boot... Using Tx2 Data line. RAPIDOv11_2nd.fg RAPIDOv11_algo.fg omap2420_m1_2nd.fg teflon_sam_nand_xsr151_m1.fg BOOT OK... Phone Type: BB5 ------------------- SYSTEM ID Response: 11 blocks ------------- SYSTEM_ASIC_ID( APE ): 24200705 ASIC_MODE_ID( APE ): 00 PUBLIC_ID( APE ): C575DCD09574C7C87878C575B64A28B2C0DC9161 ROOT_KEY_HASH( APE ): BA8710A7E1CD5A2909B9A875DB27AA2400000000 SYSTEM_ASIC_ID( RAP ): 000000010000022600010006400C192101011103 EM_ASIC_ID( RAP ): 00000295 EM_ASIC_ID( RAP ): 00000B22 PUBLIC_ID( RAP ): 163002136D5B0058A5FBEC5C98229145868A2A83 ASIC_MODE_ID( RAP ): 00 ROOT_KEY_HASH( RAP ): CAEEBB65D3C48E6DC73B49DC5063A2EE ROM_ID( RAP ): F2C6EBADC86E6189 --------------- Device ID Response: 3 blocks ------------- Storage Device: Owner Asic: RAP Type: NOR Flash Index: 0 Flash: Amd, 0001 0035 0000 6921 Storage Device Contents: Owner Asic: RAP 000000000000000000000000000000000000 ============= Set FBus mode for info ============= Pins: Mbus 0, Box Tx 1, Box Rx 1, Bsi 0 --------------------------------------------------------------- I Also tested with TX2 Line Unchecked that Wont help Either... Any Help how to solve this issue p,s i not tested on any other Phone yet Kindly Edit my Thread Title as i wrote UFS intead of UFC

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Special Offer for JAF Plus, JAF Plus Mexico edition and Vspec owners	Raskal	J.A.F. Plus	72	12-14-2008 14:21
N95 Travel Edition and maps/navigation problem	kostas66	Nokia Multimedia	1	01-22-2008 18:23
DCT4 FLASHER "SPECIAL" Edition and special price	Raskal	Main Sales Section	0	10-30-2002 03:09
LogoManager Business Edition and other special editions...	GeeZuZz	Nokia Multimedia	15	08-09-2002 22:19

12-16-2008, 09:04	#2 (permalink)
kevin168 No Life Poster Join Date: Sep 2005 Location: INDONESIA Age: 38 Posts: 795 Member: 183921 Status: Offline Sonork: 100.1590817 Thanks Meter: 205	hello... read this. also same problem, i think u should make some modified on UFC cable. br, kevin168

12-18-2008, 06:42	#3 (permalink)
Amir-SkillZ No Life Poster Join Date: Nov 2004 Location: Capetown Posts: 6,709 Member: 91045 Status: Offline Thanks Meter: 8,696	No Modification Needed Bro.. Simply Give External Power to Vpp (4.0 volts)... And press power button on phone a Little Voila see ur Phone in Local Mode