nokia 530 dead solution need? - GSM-Forum

MR.MAMUN · 01-07-2016, 15:44

================================================== ====

If the Phone is ALIVE
1. Power On the Phone and Connect it to the USB Port

If the Phone is DEAD
1. Connect Phone to the USB Port
2. Press and Hold the VOLUME DOWN and POWER Buttons
3. Wait until the Phone Vibrates Shortly...
4. Stop Pressing the Buttons...

If the Phone is DEAD BOOT
1. Connect Phone to the USB Port
2. Install Correct Drivers:
"Nokia Emergency Connectivity" Located at:

C:\AdvanceBox Turbo Flasher\Driver\NOKIA_X2_USB_DRIVERS\
================================================== ====

Recovery Handle Found! - (WinUSB)
PBL Emergency Download Detected

Start Sending Firehose Loader...
Firehose Loader Sent!
Executing Firehose Loader...
Start Processing Firehose Payload...
MSG_SIGNATURE Sent....
ERROR: error code= 1 value= HW_INIT:init storage:fail

ERROR: Flashing Failed!

shoaib_882000 · 01-08-2016, 13:37

same here waiting for reply from supporters from a long time

MR.MAMUN · 01-09-2016, 13:47

huw to dead boot repair solution need?

MR.MAMUN · 01-13-2016, 15:33

dear supporter im 3day waite but no replay?how to problem dear?

rsa7262 · 01-13-2016, 16:05

NO ANS FOR A LONG TIME
I think team busy in EMMC and lumia serial mybe another invesment again creating new tools for these new models...

01-07-2016, 15:44	#1 (permalink)
MR.MAMUN No Life Poster Join Date: Jul 2007 Location: Onilne Mobile Technology Posts: 2,161 Member: 548479 Status: Offline Thanks Meter: 138	nokia 530 dead solution need? ================================================== ==== If the Phone is ALIVE 1. Power On the Phone and Connect it to the USB Port If the Phone is DEAD 1. Connect Phone to the USB Port 2. Press and Hold the VOLUME DOWN and POWER Buttons 3. Wait until the Phone Vibrates Shortly... 4. Stop Pressing the Buttons... If the Phone is DEAD BOOT 1. Connect Phone to the USB Port 2. Install Correct Drivers: "Nokia Emergency Connectivity" Located at: C:\AdvanceBox Turbo Flasher\Driver\NOKIA_X2_USB_DRIVERS\ ================================================== ==== Recovery Handle Found! - (WinUSB) PBL Emergency Download Detected Start Sending Firehose Loader... Firehose Loader Sent! Executing Firehose Loader... Start Processing Firehose Payload... MSG_SIGNATURE Sent.... ERROR: error code= 1 value= HW_INIT:init storage:fail ERROR: Flashing Failed!

01-08-2016, 13:37	#2 (permalink)
shoaib_882000 Freak Poster Join Date: Jul 2013 Posts: 302 Member: 1980910 Status: Offline Sonork: 100.1650130 Thanks Meter: 35	same here waiting for reply from supporters from a long time

01-09-2016, 13:47	#3 (permalink)
MR.MAMUN No Life Poster Join Date: Jul 2007 Location: Onilne Mobile Technology Posts: 2,161 Member: 548479 Status: Offline Thanks Meter: 138	huw to dead boot repair solution need?

01-13-2016, 15:33	#4 (permalink)
MR.MAMUN No Life Poster Join Date: Jul 2007 Location: Onilne Mobile Technology Posts: 2,161 Member: 548479 Status: Offline Thanks Meter: 138	dear supporter im 3day waite but no replay?how to problem dear?

01-13-2016, 16:05	#5 (permalink)
rsa7262 Freak Poster Join Date: Oct 2015 Location: eArTh Posts: 268 Member: 2470191 Status: Offline Sonork: 100.1652036 Thanks Meter: 308	NO ANS FOR A LONG TIME I think team busy in EMMC and lumia serial mybe another invesment again creating new tools for these new models...