i8510 - GSM-Forum

aleksa55 · 12-07-2010, 14:47

Pls help mi with i8510

Target Not Found!
Target Not Found!
Target Not Found!

i try with all pshold, external power, 7 + * (modem mode)
always Target Not Found!

Astel · 12-07-2010, 18:23

Download from JRT support file "i8510_PCB.png" and check the description
Good luck!

aleksa55 · 12-09-2010, 11:01

all connected by manual
and PS-HOLD 2.6V external power

and still Target Not Found!
same problem what i have with i900 all other is ok

any help pls

Astel · 12-10-2010, 10:55

look at the picture "i8510_PCB.png" you must connect together the PS-HOLD and C392

trt · 02-28-2011, 10:19

where in adapter i find RST pin and RTCK ? what and where he C392 in i8510_PCB.png?

And necessarily to use capacitors and resistors?

Burebista · 03-01-2011, 16:48

Quote:

Originally Posted by trt

where in adapter i find RST pin and RTCK ? what and where he C392 in i8510_PCB.png?

And necessarily to use capacitors and resistors?

smti don't use rst and rtck.

trt · 03-02-2011, 16:10

necessarily to use capacitors and resistors show in pic on support?

12-07-2010, 14:47	#1 (permalink)
aleksa55 No Life Poster Join Date: Feb 2003 Location: Somewhere Posts: 559 Member: 22466 Status: Offline Thanks Meter: 282	i8510 Pls help mi with i8510 Target Not Found! Target Not Found! Target Not Found! i try with all pshold, external power, 7 + * (modem mode) always Target Not Found!

12-09-2010, 11:01	#3 (permalink)
aleksa55 No Life Poster Join Date: Feb 2003 Location: Somewhere Posts: 559 Member: 22466 Status: Offline Thanks Meter: 282	i8510 all connected by manual and PS-HOLD 2.6V external power and still Target Not Found! same problem what i have with i900 all other is ok any help pls

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
i8510 iNNOV8 SAMSUNG FIRMWARE + DOWNLOADER + DRIVERS + MANUEL	allal123	Samsung Flashers, Software, Firmware.	295	11-03-2019 15:09
i8510 pda driver	songyang119	Samsung Flashers, Software, Firmware.	2	09-20-2013 14:29
When Support Flashing For I8510 Samsung	Unlocksupport	NSPRO	7	04-17-2010 11:14
Any Software Have flash solution I8510	Unlocksupport	Samsung Flashers, Software, Firmware.	1	10-13-2008 22:12
Need help for dutch file i8510	Unlocksupport	Samsung Flashers, Software, Firmware.	0	09-20-2008 19:46

12-07-2010, 18:23	#2 (permalink)
Astel Insane Poster Join Date: Feb 2004 Posts: 78 Member: 54112 Status: Offline Thanks Meter: 55	Download from JRT support file "i8510_PCB.png" and check the description Good luck!

12-10-2010, 10:55	#4 (permalink)
Astel Insane Poster Join Date: Feb 2004 Posts: 78 Member: 54112 Status: Offline Thanks Meter: 55	look at the picture "i8510_PCB.png" you must connect together the PS-HOLD and C392

02-28-2011, 10:19	#5 (permalink)
trt No Life Poster Join Date: Nov 2005 Location: 46000 Posts: 543 Member: 197566 Status: Offline Thanks Meter: 89	where in adapter i find RST pin and RTCK ? what and where he C392 in i8510_PCB.png? And necessarily to use capacitors and resistors?

03-02-2011, 16:10	#7 (permalink)
trt No Life Poster Join Date: Nov 2005 Location: 46000 Posts: 543 Member: 197566 Status: Offline Thanks Meter: 89	necessarily to use capacitors and resistors show in pic on support?