Error 14 - GSM-Forum

SHIJILFONOTLY · 12-18-2010, 11:18

Code:

Error 14
Custom firmware update fail (PwnageTool). You have to restore the device  with a custom firmware. Update to a custom firmware isn't working.  Device isn't bootable. 2 
USB Problem. Check the USB connection and try other direct ports or maybe the USB cable is an older one. Device isn't bootable.

i have same fault iphone 3g phone water entery,i changed usb unit but same error show,any one faced this problem?
i need information and digram with usb port

SHIJILFONOTLY · 12-18-2010, 12:45

any one have usb realted compontent details
pls share

switch998 · 12-19-2010, 05:08

Disassemble and then clean rusted/dirty components with Isopropyl Alcohol or Hexane spray. You may need to use a q-tip or cotton swab to remove corrosion.

SHIJILFONOTLY · 12-21-2010, 06:42

Quote:

Originally Posted by switch998

Disassemble and then clean rusted/dirty components with Isopropyl Alcohol or Hexane spray. You may need to use a q-tip or cotton swab to remove corrosion.

brother u have any service mannul with usb connector
pls share

waseem147 · 12-21-2010, 17:39

the same error i have i picked the board up of the iphone 4 and put it into another iphone 4 worken and im trying to restore and the same error appear

just the board tested in another phone so new usb socket and full housing and every thing is worken expect the board and the same error i have

so please any any solution ? : (

switch998 · 12-22-2010, 01:34

Just follow this, SHIJILFONOTLY

GRYNX

Make sure you take of the EMI shields.

SHIJILFONOTLY · 12-23-2010, 06:10

Which ic controlled usb?
Any one have service mannul?
Pls share

12-18-2010, 11:18	#1 (permalink)
SHIJILFONOTLY Product Supporter Join Date: Sep 2006 Location: Kerala-India Age: 46 Posts: 6,600 Member: 351924 Status: Offline Thanks Meter: 12,469	Error 14 Code: Error 14 Custom firmware update fail (PwnageTool). You have to restore the device with a custom firmware. Update to a custom firmware isn't working. Device isn't bootable. 2 USB Problem. Check the USB connection and try other direct ports or maybe the USB cable is an older one. Device isn't bootable. i have same fault iphone 3g phone water entery,i changed usb unit but same error show,any one faced this problem? i need information and digram with usb port

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
where to find a working program all they have some errors ??	fondas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	12-12-2012 13:26
My 5110 v5.11 have a strange error.., it resets it self every 60second	luuk	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	24	08-11-2006 15:29
Avoid 3 times error code in Nokia 6185	X-plot	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	05-08-2000 20:24
The multiple errors of Winlock ... ???	Genata	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	09-20-1999 19:12
error (1002) simlock3.dll winopen	fondas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	08-28-1999 15:57

12-18-2010, 12:45	#2 (permalink)
SHIJILFONOTLY Product Supporter Join Date: Sep 2006 Location: Kerala-India Age: 46 Posts: 6,600 Member: 351924 Status: Offline Thanks Meter: 12,469	any one have usb realted compontent details pls share

12-19-2010, 05:08	#3 (permalink)
switch998 Insane Poster Join Date: Jun 2008 Posts: 76 Member: 785337 Status: Offline Thanks Meter: 22	Disassemble and then clean rusted/dirty components with Isopropyl Alcohol or Hexane spray. You may need to use a q-tip or cotton swab to remove corrosion.

12-21-2010, 17:39	#5 (permalink)
waseem147 Insane Poster Join Date: Sep 2009 Posts: 90 Member: 1112086 Status: Offline Sonork: 100.1581534 Thanks Meter: 7	the same error i have i picked the board up of the iphone 4 and put it into another iphone 4 worken and im trying to restore and the same error appear just the board tested in another phone so new usb socket and full housing and every thing is worken expect the board and the same error i have so please any any solution ? : (

12-22-2010, 01:34	#6 (permalink)
switch998 Insane Poster Join Date: Jun 2008 Posts: 76 Member: 785337 Status: Offline Thanks Meter: 22	Just follow this, SHIJILFONOTLY GRYNX Make sure you take of the EMI shields.

12-23-2010, 06:10	#7 (permalink)
SHIJILFONOTLY Product Supporter Join Date: Sep 2006 Location: Kerala-India Age: 46 Posts: 6,600 Member: 351924 Status: Offline Thanks Meter: 12,469	Which ic controlled usb? Any one have service mannul? Pls share