iphone 6 not booting after replace screen - GSM-Forum

ponga_26 · 03-22-2015, 22:04

i need help with i phone 6, i just replace the lcd and it didn't on again, when i put the charger it will vibrate frequently..i think there is some short. anyone can give me a solution pls....

eko · 03-22-2015, 22:46

wrong screw problem, search forum for related issues.

alyarif · 03-23-2015, 03:29

Error 53 on iphone is 110% related to touch id. The error will not be fixed by software. Apple officials can only replace the phones.

Thank you

..::HaCkEr::.. · 03-23-2015, 08:42

not a big isssue just disconnect bettry and put back then switch on will work

ponga_26 · 03-25-2015, 10:56

Quote:

Originally Posted by ..::HaCkEr::..

not a big isssue just disconnect bettry and put back then switch on will work

actually i already done that, but still same..and its little bit heating from the lower of the three socket of lcd, inside the cover parts..

sahil12321 · 03-25-2015, 15:24

Press the middle botton hold it and press power hold both bottons phone will restart when you see apple sign leave the bottons it will come right

ponga_26 · 03-25-2015, 16:29

Quote:

Originally Posted by sahil12321

Press the middle botton hold it and press power hold both bottons phone will restart when you see apple sign leave the bottons it will come right

Still same, but when I do what you said, it will stop the vibration and nothing happen, but when I turn on again it only gives light from the lcd, but no any logo comes out,

mobileunlockers · 03-25-2015, 16:32

turn the phone on without the lcd...see if its picked up by the computer. or try different lcd

ponga_26 · 03-25-2015, 18:14

Quote:

Originally Posted by mobileunlockers

turn the phone on without the lcd...see if its picked up by the computer. or try different lcd

It's detecting and installing the driver, but it's keep vibrating, so its mean there is power. But when I remove the charger it cannot power on.

eko · 03-26-2015, 18:12

Check the screw sockets for clip cover, your will see that one of the sockets is worn. Check especially the three that are alike.

ponga_26 · 03-26-2015, 21:15

Quote:

Originally Posted by eko

Check the screw sockets for clip cover, your will see that one of the sockets is worn. Check especially the three that are alike.

clip cover for lcd cable? but i didnt see any worn screw socket. can you give some image for that?

toni_85 · 03-26-2015, 21:23

i think you should try another lcd, the one you have tried might be fake, happened to me too iphone 5, nothing to be worry....

ponga_26 · 03-27-2015, 08:22

Quote:

Originally Posted by toni_85

i think you should try another lcd, the one you have tried might be fake, happened to me too iphone 5, nothing to be worry....

i already tried another lcd, but same problem, and the replacement lcd is working fine from another phone..

toni_85 · 03-27-2015, 09:25

this problem happen many times to me, i've solved it changing lcd, try to resold lcd conector and make a clean up after that, and be sure lcd is put ok, hope for solution

EUTeam · 03-27-2015, 16:15

if upstair solution cant u ,it maybe hardis problem, can u replace in applestore.

03-22-2015, 22:04	#1 (permalink)
ponga_26 Junior Member Join Date: Mar 2011 Posts: 28 Member: 1538575 Status: Offline Thanks Meter: 5	iphone 6 not booting after replace screen i need help with i phone 6, i just replace the lcd and it didn't on again, when i put the charger it will vibrate frequently..i think there is some short. anyone can give me a solution pls....

03-22-2015, 22:46	#2 (permalink)
eko No Life Poster Join Date: May 2003 Posts: 1,323 Member: 30098 Status: Offline Thanks Meter: 29	wrong screw problem, search forum for related issues.

03-23-2015, 03:29	#3 (permalink)
alyarif Junior Member Join Date: Mar 2015 Location: karachi/working Posts: 4 Member: 2358925 Status: Offline Sonork: 100.1663198 Thanks Meter: 0	Error 53 on iphone is 110% related to touch id. The error will not be fixed by software. Apple officials can only replace the phones. Thank you

03-23-2015, 08:42	#4 (permalink)
..::HaCkEr::.. Freak Poster Join Date: Aug 2010 Location: next to obama Posts: 280 Member: 1370494 Status: Offline Sonork: dont have Thanks Meter: 35	not a big isssue just disconnect bettry and put back then switch on will work

03-25-2015, 15:24	#6 (permalink)
sahil12321 Junior Member Join Date: Feb 2015 Posts: 1 Member: 2353366 Status: Offline Thanks Meter: 0	Press the middle botton hold it and press power hold both bottons phone will restart when you see apple sign leave the bottons it will come right

03-25-2015, 16:32	#8 (permalink)
mobileunlockers No Life Poster Join Date: Nov 2006 Location: rochdale uk Posts: 1,142 Member: 396778 Status: Offline Thanks Meter: 155	turn the phone on without the lcd...see if its picked up by the computer. or try different lcd

03-26-2015, 18:12	#10 (permalink)
eko No Life Poster Join Date: May 2003 Posts: 1,323 Member: 30098 Status: Offline Thanks Meter: 29	Check the screw sockets for clip cover, your will see that one of the sockets is worn. Check especially the three that are alike.

03-26-2015, 21:23	#12 (permalink)
toni_85 Freak Poster Join Date: Nov 2013 Posts: 288 Member: 2070856 Status: Offline Thanks Meter: 62	i think you should try another lcd, the one you have tried might be fake, happened to me too iphone 5, nothing to be worry....

03-27-2015, 09:25	#14 (permalink)
toni_85 Freak Poster Join Date: Nov 2013 Posts: 288 Member: 2070856 Status: Offline Thanks Meter: 62	this problem happen many times to me, i've solved it changing lcd, try to resold lcd conector and make a clean up after that, and be sure lcd is put ok, hope for solution

03-27-2015, 16:15	#15 (permalink)
EUTeam Insane Poster Join Date: Jan 2015 Posts: 95 Member: 2329506 Status: Offline Thanks Meter: 5	if upstair solution cant u ,it maybe hardis problem, can u replace in applestore.