Face problem in lg rd6400

[ranagaurav]

Plz help
riff team set is restart condition
cpu=qsc6020
here is log

[6/30/2011 10:38:23 pm] [start operation_id = dcc_read_memory]
[6/30/2011 10:38:25 pm] open serial port...ok
[6/30/2011 10:38:25 pm] connecting to the riff box...ok
[6/30/2011 10:38:25 pm] firmware version: 1.25, jtag manager version: 1.33
[6/30/2011 10:38:25 pm] selected resurrector: [qsc60xx l18 d08]
[6/30/2011 10:38:25 pm]
[6/30/2011 10:38:25 pm] connecting to the dead body...ok
[6/30/2011 10:38:25 pm] detected dead body id: 0x000200c1 - ignored!
[6/30/2011 10:38:25 pm] set i/o voltage reads as 2.59v, tck frequency is 1 mhz
[6/30/2011 10:38:25 pm]
[6/30/2011 10:38:25 pm] resurrection sequence started.
[6/30/2011 10:38:25 pm] establish communication with the phone...ok
[6/30/2011 10:38:25 pm] initializing internal hardware configuration...failed
[6/30/2011 10:38:25 pm] error: Read/write memory failed during h/w init.
[6/30/2011 10:38:25 pm] [finish operation_id = dcc_read_memory]

i try all qualcomm nor dll but problem same

[ranagaurav]

phone have 100% softwer not hardwer
but not working on riff i use other tool
connect and write proper
here is proff
http://img861.imageshack.us/img861/5017/6400.jpg
where is problem in 6020 cpu
i face evrey time any problem in 6020 cpu

[ranagaurav]

now this problem i m so cunfuse

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.25, JTAG Manager Version: 1.33
Selected Resurrector: [QSC60XX L18 D08]

Connecting to the dead body...OK
Detected dead body ID: 0x200B20E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x0001/0x387E (64MB)

Writting FLASH1 memory from 0x00000000 to 0x00FFFFFF
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK
ERROR: Stopped due to multiple communication errors. Terminating at 0x00000000