galaxy s3 I747 error from samsung warranty

[nickmatine]

hi
i have four motherboards I747, all came from Samsung after the customer refuse the repair cost (void warranty with flashed custom rom or firmware). for sure there are not bricked forever while Samsung can fix if the client pay.
any idea?

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [Samsung I747M V1.0.4711.52503]
Restarting target (nRST Low then High)...OK

Connecting to the dead body...OK
Detected dead body ID: 0x706B50E1 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 2 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...FAILED
ERROR: No response from the RIFF Box.


thanks

[.::TEJARAM::.]

HI

RIFF JTAG Box FAQ - ERROR: No response from the RIFF Box.


BR, TEJARAM

[nickmatine]

thanks for reply
i read faq before

i have a custom connection, no solder needed and have tried also with working motherboards
tried all rtck speed

maybe this one Check device hardware for problems
but like i said if customer pay they can fix it
so it should be a trick

[BABAK NURI]

Hi
I747 based on Qualcomm....And Usually Need Check HW
--
Please Check This:
1-PC Detected Phone in "QUHSB " Mode????

2-Please Check Phone History With Your Client
if phone dead suddenly it's HW Problem
if phone dead by Wrong SW,You Can Repair Via JTAG(RIFF-BOX)

--
I Think I have Officially SD Boot Repair For I747....(I Need Check My PC in Office)
So,Plz Contact Me Via Sonork

Thanks

[nickmatine]

Originally Posted by BABAK NURI

Hi
I747 based on Qualcomm....And Usually Need Check HW
--
Please Check This:
1-PC Detected Phone in "QUHSB " Mode????

2-Please Check Phone History With Your Client
if phone dead suddenly it's HW Problem
if phone dead by Wrong SW,You Can Repair Via JTAG(RIFF-BOX)

--
I Think I have Officially SD Boot Repair For I747....(I Need Check My PC in Office)
So,Plz Contact Me Via Sonork



Thanks

i will contact you via sonork

all motherboards SW problem, all bad firmware flashed or bad custom recovery
and all comes from samsung
all with same errro with jtag and all from samsung

[BABAK NURI]

Hi
Ok,Please Find Another Working Phone For Make SD_Boot Recovery
Then,Contact Me Tomorrow ,i'll Send You Boot_Recovery


Can You Check PCB For Exactly Printed Model? May be You have I747m ????

[LEENO]

i have riffbox, can i hav too sd_boot recovery? I have working i9300, have it the same cpu?

[spagman]

Originally Posted by nickmatine

hi
i have four motherboards I747, all came from Samsung after the customer refuse the repair cost (void warranty with flashed custom rom or firmware). for sure there are not bricked forever while Samsung can fix if the client pay.
any idea?

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [Samsung I747M V1.0.4711.52503]
Restarting target (nRST Low then High)...OK

Connecting to the dead body...OK
Detected dead body ID: 0x706B50E1 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 2 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...FAILED
ERROR: No response from the RIFF Box.


thanks

Why are you using I747M dll if the motherboards are I747 ?

[BABAK NURI]

Originally Posted by LEENO

i have riffbox, can i hav too sd_boot recovery? I have working i9300, have it the same cpu?

Hi
Sure,If You Want I747 Boot_Recovery,You Can Contact Me Via Sonork,i'll Give You
--
No,It's Not Same,i9300 is Exynos and I747 is Qualcomm

[nickmatine]

it's I747m
all are i747M
i have another i747m working

[nickmatine]

Originally Posted by spagman

Why are you using I747M dll if the motherboards are I747 ?

all motherboards are i747m

[nguyento1986]

Originally Posted by BABAK NURI

Hi
Sure,If You Want I747 Boot_Recovery,You Can Contact Me Via Sonork,i'll Give You
--
No,It's Not Same,i9300 is Exynos and I747 is Qualcomm

I need I747 Boot_recovery too.
Thanks.

[membug]

i have exact same problem...is it possible that they disabled jtag mode?

[nickmatine]

Originally Posted by membug

i have exact same problem...is it possible that they disabled jtag mode?

Yes. Maybe it's possible. But they are able to enable also. I don't know how

[membug]

Originally Posted by nickmatine

Yes. Maybe it's possible. But they are able to enable also. I don't know how

Ya I know they want to charge my customer $400 to do it....anyways i will try to find the schematics for the phone I think there is a way to re-enable it