**** HTC Desire(Bravo) PB9920000 Unlock/Repair mega thread **** - Page 11 - GSM-Forum

**legija** · 12-13-2010, 18:06

Quote:

Originally Posted by rico1

Dear sir!
The problem we are not interested in phones that we are working on it and the RIFF Ressurection away after the bricks are?

I am sorry, but You have to work on Your english, since I have no idea what You talk about.

**legija** · 12-13-2010, 18:07

Quote:

Originally Posted by 33coupe

Yes Sir, i don't have it with me to review, but i read everything unless i blatantly missed something, i did everything correct.

I know the most common issue was not connecting pin 3 TRST. But unless my solder joint was bad everything was connected properly. Due to some bad luck one of my pads ripped off and i can't re-solder to it.

Is there a schematic for the board available anywhere so i can find another pickup point?

Thanks

Hi,
There is section explaining how to enter fastboot mode in order to upgrade firmware.
You should read it.

33coupe · 12-13-2010, 20:08

Legija,

Sadly nothing happends then as well.

rico1 · 12-13-2010, 21:22

Quote:

Originally Posted by legija

I am sorry, but You have to work on Your english, since I have no idea what You talk about.

Did the phone! I want to unlock.
Resurection after not turn on.
There is a newer version?
Micro-box because he could not unlock.
How do I restore it to working ability?

rico1 · 12-13-2010, 22:49

This is why it is?
WARNING: Programming Error (0x24) at 0x011C0000 also Ignored.

rajSE · 12-14-2010, 02:02

Hi,

Please help, this is the log from RIFF box

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.15, JTAG Manager Version: 1.19
Selected Resurrector: [HTC Desire]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x66BC (512MB)
Unlocking the Phone...FAILED
ERROR: Unlock was not Completed due to Error: 0x39

Can anyone help?

RajSE

huzsolt · 12-14-2010, 09:14

If you are using Google translate, please don't do it anymore, instead ask a friend with better English skills to translate for you, becouse your posts are just random English words put side by side, with no meaning.

rico1 · 12-14-2010, 09:38

in the dump! Look at someone?

HTC Desire_93boot,locked.zip - 4shared.com - online file sharing and storage - download

rico1 · 12-14-2010, 10:37

Quote:

Originally Posted by huzsolt

If you are using Google translate, please don't do it anymore, instead ask a friend with better English skills to translate for you, becouse your posts are just random English words put side by side, with no meaning.

sorry! I thought it was good for the google translator.

rico1 · 12-14-2010, 10:40

This is normal after rom update?
looking device manager
how to connect update RUU?

**legija** · 12-14-2010, 11:31

Hi,
Please wait for update. Right now as i can see, You dont have SPL in phone.

rico1 · 12-14-2010, 12:59

Quote:

Originally Posted by legija

Hi,
Please wait for update. Right now as i can see, You dont have SPL in phone.

Thanx for reply!

There are two telephones for me what is unsupported the unlock. And does not switch on.

When expected the updates?

rico1 · 12-14-2010, 13:02

Quote:

Originally Posted by rajSE

Hi,

Please help, this is the log from RIFF box

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.15, JTAG Manager Version: 1.19
Selected Resurrector: [HTC Desire]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x66BC (512MB)
Unlocking the Phone...FAILED
ERROR: Unlock was not Completed due to Error: 0x39

Can anyone help?

RajSE

He was this for me first.
Then pressed the resurrection and did not switch on.
We are involved in probable new hardware!

**legija** · 12-16-2010, 18:42

Hi,
All who had problems with new HW revisions should download latest updates - JTAG Manager v1.20, RIFF Box firmware v1.16 and latest HTC Desire DLL.

These updates should resolve 0x39 error on unlocking, and revive dead phones.

rico1 · 12-16-2010, 18:46

Quote:

Originally Posted by legija

Hi,
All who had problems with new HW revisions should download latest updates - JTAG Manager v1.20, RIFF Box firmware v1.16 and latest HTC Desire DLL.

These updates should resolve 0x39 error on unlocking, and revive dead phones.

I test it and I write the experiences!

12-14-2010, 02:02	#156 (permalink)
rajSE Registered User Join Date: Jan 2005 Age: 46 Posts: 209 Member: 111373 Status: Offline Thanks Meter: 25	HTC Desire NOT UNLOCKING Hi, Please help, this is the log from RIFF box Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.15, JTAG Manager Version: 1.19 Selected Resurrector: [HTC Desire] Connecting to the dead body...OK Detected dead body ID: 0x202400E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x66BC (512MB) Unlocking the Phone...FAILED ERROR: Unlock was not Completed due to Error: 0x39 Can anyone help? RajSE

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	23	01-07-2018 17:14
$50 Reward for unlocking my 6150!!!	TheDon	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	03-23-2015 14:21
FAQ about unlock n0kia	man0n	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	11-29-2010 19:06

12-13-2010, 20:08	#153 (permalink)
33coupe Junior Member Join Date: Dec 2010 Posts: 8 Member: 1465724 Status: Offline Thanks Meter: 0	Legija, Sadly nothing happends then as well.

12-13-2010, 22:49	#155 (permalink)
rico1 No Life Poster Join Date: Jul 2001 Location: handline Age: 48 Posts: 788 Member: 5397 Status: Offline Thanks Meter: 38	This is why it is? WARNING: Programming Error (0x24) at 0x011C0000 also Ignored.

12-14-2010, 09:14	#157 (permalink)
huzsolt No Life Poster Join Date: Jul 2004 Location: YODAFON Posts: 1,522 Member: 75392 Status: Offline Sonork: 100.81199 Thanks Meter: 136	If you are using Google translate, please don't do it anymore, instead ask a friend with better English skills to translate for you, becouse your posts are just random English words put side by side, with no meaning.

12-14-2010, 09:38	#158 (permalink)
rico1 No Life Poster Join Date: Jul 2001 Location: handline Age: 48 Posts: 788 Member: 5397 Status: Offline Thanks Meter: 38	in the dump! Look at someone? HTC Desire_93boot,locked.zip - 4shared.com - online file sharing and storage - download

12-14-2010, 11:31	#161 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	Hi, Please wait for update. Right now as i can see, You dont have SPL in phone.

12-16-2010, 18:42	#164 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	Hi, All who had problems with new HW revisions should download latest updates - JTAG Manager v1.20, RIFF Box firmware v1.16 and latest HTC Desire DLL. These updates should resolve 0x39 error on unlocking, and revive dead phones.