HTC Diamond Resurrector error.0xA02B00E1 - WRONG!!!

[ken6430841]

CPU ESM7206A
NAND SAMSUNG KMXEE0A0CM-S600

Solder JTAG cable is Good , battery Good
HTC Diamond DIAM120 SPL1.93, can't use RUU repair

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.24, JTAG Manager Version: 1.32
Selected Resurrector: [HTC Diamond]

Connecting to the dead body...OK
Detected dead body ID: 0xA02B00E1 - WRONG!!!
ERROR: Current ID does not belong to the HTC Diamond family.

Use ESM7XXX DCC read/write

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.24, JTAG Manager Version: 1.32
Selected Resurrector: [ESM7XXX L41 D04]

Connecting to the dead body...OK
Detected dead body ID: 0xA02B00E1 - CORRECT!
Set I/O Voltage reads as 2.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x15AA (256MB)

Reading FLASH1 address space from 0x00000000 to 0x007FFFFF
Failed to receive answer to READ command.

[ken6430841]

ESM7XXX DCC read/write Speed 100kHz

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.24, JTAG Manager Version: 1.32
Selected Resurrector: [ESM7XXX L41 D04]

Connecting to the dead body...OK
Detected dead body ID: 0xA02B00E1 - CORRECT!
Set I/O Voltage reads as 2.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 100 kHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...FAILED
ERROR: Memory access timed out.

[ken6430841]

Use DCC read/write Special Settings Bypass ID Check

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.24, JTAG Manager Version: 1.32
Selected Resurrector: [HTC Diamond]

Connecting to the dead body...OK
Detected dead body ID: 0xA02B00E1 - IGNORED!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...FAILED
ERROR: Read/Write memory failed during H/W Init.

[legija]

Hi,

Please select HTC Magic (SAPP400) And make tests with DCC TAB.

[ken6430841]

Originally Posted by legija

Hi,

Please select HTC Magic (SAPP400) And make tests with DCC TAB.

USE MAGIC SAPP400 can't read.

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.24, JTAG Manager Version: 1.32
Selected Resurrector: [HTC Magic (SAPP400)]

Connecting to the dead body...OK
Detected dead body ID: 0xA02B00E1 - CORRECT!
Set I/O Voltage reads as 2.99V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x15AA (256MB)


WARNING: Resuming interrupted read from 0x00000000, yet to read - 0x00800000...
Reading FLASH1 address space from 0x00000000 to 0x007FFFFF
Failed to receive answer to READ command.

use other speed same error

[ken6430841]

use HTC eris can read..but Reading break anytime

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.24, JTAG Manager Version: 1.32
Selected Resurrector: [HTC Droid Eris]

Connecting to the dead body...OK
Detected dead body ID: 0xA02B00E1 - IGNORED!
Set I/O Voltage reads as 2.99V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x15AA (256MB)

Reading FLASH1 address space from 0x00000000 to 0x0FFFFFFF

[legija]

Flash chip is detected correctly, so reading problems are related only to bad connection.

What exactly You want to do with this phone?

[ken6430841]

Originally Posted by legija

Flash chip is detected correctly, so reading problems are related only to bad connection.

What exactly You want to do with this phone?

i repair this phone ok..write full dump phone ok..
no bad connection problem ..Just Riff no enough to support some flash chip
I tried several times before repair
thanks you ... can you give me you email.. i have htc eris can't repair
I want to send the video to you, you can understand the problem..
Because I speak English is not very good