Htc legend Unlock Failed. help - GSM-Forum

hkyrace · 06-25-2011, 10:41

i follow the step from manual :
1. select htc legend on ressurection tab
2. solder jtag wire
3. connect usb
4. press ressurection button
5. check Reflash Total HTC partition" and enter desired IMEI in IMEI field

[6/24/2011 6:30:18 PM] [START OPERATION_ID = RESURRECT]
[6/24/2011 6:32:09 PM] Open serial port...OK
[6/24/2011 6:32:09 PM] Connecting to the RIFF Box...OK
[6/24/2011 6:32:09 PM] Firmware Version: 1.25, JTAG Manager Version: 1.33
[6/24/2011 6:32:09 PM] Selected Resurrector: [HTC Legend]
[6/24/2011 6:32:09 PM]
[6/24/2011 6:32:09 PM] Connecting to the dead body...OK
[6/24/2011 6:32:09 PM] Detected dead body ID: 0x203C00E1 - CORRECT!
[6/24/2011 6:32:09 PM] Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
[6/24/2011 6:32:09 PM] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[6/24/2011 6:32:09 PM]
[6/24/2011 6:32:09 PM] Resurrection sequence started.
[6/24/2011 6:32:09 PM] Establish communication with the phone...OK
[6/24/2011 6:32:09 PM] Initializing internal hardware configuration...OK
[6/24/2011 6:32:09 PM] Uploading resurrector data into memory...OK
[6/24/2011 6:32:09 PM] Starting communication with resurrector...OK
[6/24/2011 6:32:09 PM]
[6/24/2011 6:32:09 PM] Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB)
[6/24/2011 6:32:09 PM] Selected Resurrection Data for the NAND Chip with Page size = 2KB
[6/24/2011 6:32:09 PM]
[6/24/2011 6:32:09 PM] Flashing the dead body...OK
[6/24/2011 6:32:09 PM] Resurrection complete!
[6/24/2011 6:32:09 PM] [FINISH OPERATION_ID = RESURRECT]

phone become "hang on htc logo"

and then i flash with
RUU_Legend_Froyo_S_HTC_WWE_3.15.405.3_Radio_47.51. 35.17_7.13.35.05_release_160328_signed

phone can start, but still locked to network.

anyone can help?

**legija** · 06-25-2011, 13:48

Hi,
You can read unlock codes from all HTC phones using this method :

1. Select model and connect to RIFF Box
2. Open Plugins -> Qualcomm Fullflash Image processing
3. Click "Get partitions from device"
4. Double click "HTC" partition
5. Click "Read selected"

hkyrace · 06-25-2011, 15:15

ok, i try sir legija. thx for your qick respon

hkyrace · 06-27-2011, 10:18

thx mr legija, unlocked Done...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	23	01-07-2018 17:14
HELP!!! BACKGROUND SCREEN LOGO	Michael Go	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	11-23-2017 08:11
my 8810 is phone locked ,can somebody please help	duyphuc	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	18	12-23-2014 09:03
Eeprom dump lost, help needed.	CAMILO	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	11-29-2010 19:04
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29

06-25-2011, 13:48	#2 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	Hi, You can read unlock codes from all HTC phones using this method : 1. Select model and connect to RIFF Box 2. Open Plugins -> Qualcomm Fullflash Image processing 3. Click "Get partitions from device" 4. Double click "HTC" partition 5. Click "Read selected"

06-25-2011, 15:15	#3 (permalink)
hkyrace Freak Poster Join Date: Apr 2005 Location: bali island Age: 43 Posts: 270 Member: 137049 Status: Offline Thanks Meter: 7	ok, i try sir legija. thx for your qick respon

06-27-2011, 10:18	#4 (permalink)
hkyrace Freak Poster Join Date: Apr 2005 Location: bali island Age: 43 Posts: 270 Member: 137049 Status: Offline Thanks Meter: 7	thx mr legija, unlocked Done...